• Geomechanics and Engineering
• /
• 제25권3호
• /
• pp.207-219
• /
• 2021

Several additives are used to enhance the geotechnical properties (e.g., shear wave velocity, shear modulus) of soils to provide sustainable, economical and eco-friendly solutions in geotechnical and geo-environmental engineering. In this study, piezoelectric ring actuators are used to measure the shear wave velocity of unreinforced, fiber, cemented, and fiber reinforced cemented Toyoura sand. One dimensional oedometer tests are performed on medium dense specimens of Toyoura sand-cement-fiber-silica flour mixtures with different percentages of silica flour (0-42%), fiber and cement (e.g., 0-3%) additives. The experimental results indicate that behavior of the mixtures is significantly affected by the concentration of silica flour, fiber and cement additives. Results show that with the addition of 1-3% of PVA fibers, the shear wave velocity increases by only 1-3%. However, the addition of 1-4% of cement increases the shear wave velocity by 8-35%. 10.5-21% increase of silica flour reduces the shear wave velocity by 2-5% but adding 28-42% silica flour significantly reduces the shear wave velocity by 12-31%. In addition, the combined effect of cement and fibers was also found and with only 2% cement and 1% fiber, the shear wave velocity increase was found to be approximately 24% and with only 3% cement and 3% fibers this increased to 35%. The results from this study for the normalized shear modulus and normalized mean effective stress agree well with previous findings on pure Toyoura sand, Toyoura silty sand, fiber reinforced, fiber reinforced cemented Toyoura sand. Any variations are likely due to the difference in stress history (i.e., isotropic versus anisotropic consolidation) and the measurement method. In addition, these small discrepancies could be attributed to several other factors. The potential factors include the difference in specimen sizes, test devices, methods of analysis for the measurement of arrival time, the use of an appropriate Ko to convert the vertical stresses into mean effective stress, and sample preparation techniques. Lastly, it was investigated that there is a robust inverse relationship between α factor and 𝞫₀ exponent. It was found that less compressible soils exhibit higher 𝜶 factors and lower 𝞫₀ exponents.

• Spatial Information Research
• /
• 제7권1호
• /
• pp.1-12
• /
• 1999

토지정보체계(Geographical Information System, GIS)에서 지형표고를 나타내는 수치지형정보(Digital Terrain Model, DTM)는 토공량 계산 조경, 토목, 가시구역 분석, 무선중계국 위치선정 등 GIS가 활용되면서 여러 분야에서 이용되고 있다. DIM의 표고정보 및 이를 활용한 경사도와 같은 2차 정보의 정확도는 광활하고 평탄한 지형에서는 격자 간격, 원자료의 해상력 등이 크게 문제되지 않을 수 있으나 한국과 같이 지형의 기복이 심하고 다양한 형태의 지형에서는 적절한 해상력, 원자료의 정확성 등이 지형 표현에 있어 중요한 요소가 되고 있다. 그러므로 본 연구의 목적은 95소프트웨어를 이용한 경사도 산출시 등고선의 정확도, 해상력, DTM의 자료구조에 따른 차이점을 분석하여 한국의 산악 지형에 적절한 해상력을 구하고자 하는 데 있다. 이를 위해 현재 세계적으로 많이 쓰이고 있는 DTM의 자료구조인 고도행렬식 기법(altitude matrices)을 활용한 격자형(raster) 자료구조인 Idrisi(ver. 2.0)와 비정규삼각망(Triangulated Irregular Network, TIN)자료구조인 ArcView(ver. 3.0a)를 사용하여 덕유산 국립공원의 1:25,000 지형도에서 생성한 DIM을 이용하여 경사도를 산출한 후 각각의 경사도 차이에 대해 비교 분석한 결과 다음과 같은 결론을 얻었다. 1) 해상력이 낮을수록 원자료의 등고선 간격이 클수록 지형의 smoothing 효과가 나타났다. 2) 격자형 자료구조인 Idrisi와 TIN자료구조인 ArcView사이의 경사도 값 차이는 해상력이 떨어질수록 큰 차이를 보였다. 3) 30개의 표본점을 선택해 오차 비교 결과 경사도 오차의 경우 격자형 자료구조인 Idrisi와TIN자료구조인 ArcView모두 해상력에 따른 큰 차이가 없었으며 표고차의 경우 ArcView는 l0m 등고선 간격에서 생성한 해상력 10, 20, 30m DTM에서 각각 4.9, 6.2, 5.9m로서 큰 차이가 없었고 Idrisi는 해상력 10, 20, 30m DTM에서 각각 6.3, 9.1, 10.9m로서 해상력이 감소할수록 표고 값의 오차가 늘었다. 4) Idrisi ArcView 모두 산정상부, 계곡 바닥과 같은 지형의 지성선을 고려하지 못하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.8-9
• /
• 2011

On 4 September 2010 an earthquake of magnitude 7.1 on the Richter scale occurred on the Canterbury Plains in the South Island of New Zealand. The Canterbury Plains are an area of extensive groundwater and spring fed surface water systems. Since the September earthquake there have been several thousand aftershocks (Fig. 1), the largest being a 6.3 magnitude quake which occurred close to the centre of Christchurch on 22February 2011. This second quake caused extensive damage to the city of Christchurch including the deaths of 189 people. Both of these quakes had marked hydrological impacts. Water is a vital natural resource for Canterburywith groundwater being extracted for potable supply and both ground and surface water being used extensively for agricultural and horticultural irrigation.The groundwater is of very high quality so that the city of Christchurch (population approx. 400,000) supplies untreated artesian water to the majority of households and businesses. Both earthquakes caused immediate hydrological effects, the most dramatic of which was the liquefaction of sediments and the release of shallow groundwater containing a fine grey silt-sand material. The liquefaction that occurred fitted within the empirical relationship between distance from epicentre and magnitude of quake described by Montgomery et al. (2003). . It appears that liquefaction resulted in development of discontinuities in confining layers. In some cases these appear to have been maintained by artesian pressure and continuing flow, and the springs are continuing to flow even now. In spring-fed streams there was an increase in flow that lasted for several days and in some cases flows remained high for several months afterwards although this could be linked to a very wet winter prior to the September earthquake. Analysis of the slope of baseflow recession for a spring-fed stream before and after the September earthquake shows no change, indicating no substantial change in the aquifer structure that feeds this stream.A complicating factor for consideration of river flows was that in some places the liquefaction of shallow sediments led to lateral spreading of river banks. The lateral spread lessened the channel cross section so water levels rose although the flow might not have risen accordingly. Groundwater level peaks moved both up and down, depending on the location of wells. Groundwater level changes for the two earthquakes were strongly related to the proximity to the epicentre. The February 2011 earthquake resulted in significantly larger groundwater level changes in eastern Christchurch than occurred in September 2010. In a well of similar distance from both epicentres the two events resulted in a similar sized increase in water level but the slightly slower rate of increase and the markedly slower recession recorded in the February event suggests that the well may have been partially blocked by sediment flowing into the well at depth. The effects of the February earthquake were more localised and in the area to the west of Christchurch it was the earlier earthquake that had greater impact. Many of the recorded responses have been compromised, or complicated, by damage or clogging and further inspections will need to be carried out to allow a more definitive interpretation. Nevertheless, it is reasonable to provisionally conclude that there is no clear evidence of significant change in aquifer pressures or properties. The different response of groundwater to earthquakes across the Canterbury Plains is the subject of a new research project about to start that uses the information to improve groundwater characterisation for the region. Montgomery D.R., Greenberg H.M., Smith D.T. (2003) Stream flow response to the Nisqually earthquake. Earth & Planetary Science Letters 209 19-28.

• 자원리싸이클링
• /
• 제7권4호
• /
• pp.27-34
• /
• 1998

본 연구에서는 NiCuZn Ferrite(NCZF) 제조공정의 제어에 대하여 연구하였다. $700^{\circ}C$, 3시간 하소한 NCZF를 약 60시간 볼밀링하여 약 $0.5\mu\;extrm{m}$ 입자크기로 분쇄한 후 분무 건조하여 과립화하였다. NCZF의 충전율에 따른 겉보기 고화속도 및 초기투자율에 미치는 영향을 조사한 결과 다음과 같은 결과를 얻었다. 1. 성형압력 유지시간 1분에서 성형압력을 약 20~170 ㎫로 변화시켜 제조한 NCZF 토로이달 상의 출발시편은 성형압이 증가하면서 입자의 충전율은 48.6%에서 56.8%로 증가하였다. 2. 일정 소성온도에서 NCZF의 충전율이 높아질수록 고화속도가 높아지고, 일정 성형압력에서 소성온도가 높아질수록 NCZF의 겉보기 고화속도는 빨라졌다. NCZF의 충전율과 소성온도가 높고, 소성시간이 길어지면 bulk density는 증가하였다. 3. 고정된 조성에서 소성온도($875~925^{\circ}C$)와 소성시간(0~5시간)의 조합에 의해 제조된 NCZF의 초기투자율은 bulk density와 semi-log상에서 직선적인 비례관계를 가지며 NCZF입자의 충전율에 크게 의존하였다. NCZF입자의 충전율과 이들을 소성하였을 때의 bulk density를 알면 초기투자율을 예측할 수 있었다. log $\mu$i=$G1{\times}BD$+$G2{\times}충전율$+b(0), G1;0.8394, G2;-3.6233, (b);0.7053.

• 한국동물위생학회지
• /
• 제20권2호
• /
• pp.143-150
• /
• 1997

Total viable cells and lactose non-fermenting cells were counted from animal feedstuffs (n=65). And isolation of Gram negative lactose nonfermenting enterobacteria and antibiotics susceptibility of isolates were performed. 1. The ranges of total viable cells / lactose non-fermenters in animal feedstuffs from Korean cattle were counted as 9$\times$$10^4$-1$\times$$10^7$ / 1$\times$$10^2$-6$\times$$10^3$, milking cow as 1$\times$$10^4$-2$\times$$10^8$ / 2$\times$$10^2$-8$\times$$10^3$, pig as 1$\times$$10^4$-1$\times$$10^6$ / 2$\times$$10^2$-6$\times$$10^3$, and chicken as 7$\times$$10^4$-1$\times$$10^9$ / 4$\times$$10^2$-1$\times$$10^5$ cfu/g, respectively. 2. Among the 214 isolates from feedstufs, 87 from Chinan(n=23), 66 from Changsu (n=23) and 61 from Mooju(n=19) were isolated. Of these isolates, 60 from pigs (n: 19), 51 from milking cows(n=15), 45 from chikens(n=11) and 58 from Korean cattle(20) were isolated. 3. Among the 6 genuses of Gram negative lactose nonfermenting enterobacili, Salmonella sp, Y pseudotuberculosis, Ent agglomerans and Sal choleraesuis were frequently encountered. 4. A majority of isolates were sensitive to 19 antibiotics, singly or in combination. These isolates were completely susceptible to Cp, Gm, Imp and Pi, 93% to Ak and To, 73% to Cax and Ts, 66% to Cft and Tim, 46-53% to Caz, Cf and Cz, 33-40% to Am, Azt, Cfz and Ti, and 6% to Cfx, in order, but not susceptible to Crm. 5. Among the antibiotic resistant strains, a total of 23 resistant patterns was noted, and of these Crm 40(18.7%), Am Cf Cfx Cfz Crm Ti 27(12.6%), each of Azt Ctx Crm and Azt Cax Caz Cft Cfx Crm 22(10.3% ) were frequently encountered.

• 암석학회지
• /
• 제10권3호
• /
• pp.157-171
• /
• 2001

다검출기 유도결합 플라즈마 질량분석기(Multi-Collector Inductively Coupled Plasma Mass Spectrometer; MC/ICP/MS; AXIOM MC 모델)를 이용한 Pb동위원소 분석 시 고려 사항인 Pb/Ti 비율, Pb농도 영향, 기질 원소 영향을 살펴보고, NBS 981 용액을 2001년 3월부터 8월까지 42번 측정하여 정확도 및 재현성 을 검토하였다. 그리고 암석, 청동기 및 퇴적물 시료의 Pb 동위원소를 분석하여 열 이온화 질량분석기(TIMS) 자료와 비교하였다. NBS 981 Pb 200 ng으로 동위원소 비율을 측정하였을 때 $^{206}$ $Pb^{204}$ , $Pb^{207}$ //$Pb^{204}$ , $Pb^{208}$ $Pb^{204}$ Pb 비율은 약 500 ppm(2sd), $^{/}$$207^{206}$ Pb 및 $Pb^{208}$ $Pb^{206}$Pb 비율은 100~200 ppm(2sd)의 재현성을 얻을 수 있었다. Pb등위원소 분석의 정확도 및 재현성 측면에서 최적 조건은 1) Pb/Tl농도 비가 10 이고 2) Pb농도가 100 ng/ml 이상이며 3) 질량 분별 효과는 지수 법칙에 따라 보정하고 이 때 사용된 Tl의 동위원소 비율($^{205}$ $Tl^{203}$ Tl)은 2.3887이며 질량 분별 인자는 측정된 $208^{Pb}$ $^{206}$ 및 $Pb^{205}$ $Tl^{203}$ Tl 비율로부터 경험적으로 구해진 Pb의 인자를 이용하는 것이었다. 시료 중의 기질 원소들(matrix elements)에 의한 Pb 동위원소 비율의 영향은 없는 것으로 판단되며, TIMS와 비교된 시료들에 대하여 Pb 등위원소들은 측정 오차 범위 내에서 잘 일치하였다. 즉, MC/ICP/MS에 의한 Pb 동위원소 분석은 시료 전처리 단계를 줄여도 WS와 유사한 정밀도를 얻을 수 있어 신속한 분석방법이라 할 수 있다.다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권4호
• /
• pp.479-485
• /
• 2017

Objective: The effects of particle size of processed barley grain, enzyme addition and microwave treatment on in vitro dry matter (DM) disappearance (DMD), gas production and fermentation pH were investigated for feedlot cattle. Methods: Rumen fluid from four fistulated feedlot cattle fed a diet of 860 dry-rolled barley grain, 90 maize silage and 50 supplement g/kg DM was used as inoculum in 3 batch culture in vitro studies. In Experiment 1, dry-rolled barley and barley ground through a 1-, 2-, or 4-mm screen were used to obtain four substrates differing in particle size. In Experiment 2, cellulase enzyme (ENZ) from Acremonium cellulolyticus Y-94 was added to dry-rolled and ground barley (2-mm) at 0, 0.1, 0.5, 1, and 2 mg/g, while Experiment 3 examined the interactions between microwaving (0, 30, and 60 s microwaving) and ENZ addition (0, 1, and 2 mg/g) using dry-rolled barley and 2-mm ground barley. Results: In Experiment 1, decreasing particle size increased DMD and gas production, and decreased fermentation pH (p<0.01). The DMD (g/kg DM) of the dry-rolled barley after 24 h incubation was considerably lower (p<0.05) than that of the ground barley (119.1 dry-rolled barley versus 284.8 for 4-mm, 341.7 for 2-mm; and 358.6 for 1-mm). In Experiment 2, addition of ENZ to dry-rolled barley increased DMD (p<0.01) and tended to increase (p = 0.09) gas production and decreased (p<0.01) fermentation pH, but these variables were not affected by ENZ addition to ground barley. In Experiment 3, there were no interactions between microwaving and ENZ addition after microwaving for any of the variables. Microwaving had minimal effects (except decreased fermentation pH), but consistent with Experiment 2, ENZ addition increased (p<0.01) DMD and gas production, and decreased (p<0.05) fermentation pH of dry-rolled barley, but not ground barley. Conclusion: We conclude that cellulase enzymes can be used to increase the rumen disappearance of barley grain when it is coarsely processed as in the case of dry-rolled barley. However, microwaving of barley grain offered no further improvements in ruminal fermentation of barley grain.

• 정보화정책
• /
• 제18권4호
• /
• pp.42-58
• /
• 2011

웹(Web)의 창시자인 팀 버너스 리 경(Sir. Tim Berners-lee)은 웹의 힘은 보편성에 있으며, 장애에 구애 없이 모든 사람이 접근할 수 있는 것이 가장 중요한 요소라고 지적(W3C WAI, 2006)하였다. 또한 Lasswell(1971)과 허범(2009a;2009b)이 말하는 정책학의 이상과 가치의 핵심인 인간의 존엄성 추구라는 관점에서 볼 때에도 인터넷 상의 형평성 구현은 정보사회에서의 중요한 가치이다. 이러한 맥락에서 본 연구는 지식정보사회의 핵심인 웹 상에서의 형평성을 구현하는데 있어 중요한 웹 접근성 준수에 영향을 주는 요인을 도출하고 정책적 시사점을 제시하는데 연구 목적이 있다. 본 연구는 특히, 광역자치단체의 웹 접근성 정책에 영향을 미치는 주요 요소를 문헌 연구와 수요공급 균형 모형의 가정을 준용하여 법제도 환경 요소, 재정 기반 요소, 정책자원 투입 요소, 정책 수요 요소로 가정을 하고 이에 따라 연구 모형을 설계하였다. 이를 바탕으로 우리나라 16개 광역자치단체에 대한 전수 분석을 통해 웹 접근성 정책 결정요인 분석을 실시하였다. 연구의 정확성을 위해 본 연구는 각 광역자치단체들의 5개년 패널자료를 바탕으로 최적모형 검정을 통해 도출한 패널분석모형을 통해 분석을 실시하였다. 본 연구의 패널분석모형은 웹 접근성 지수를 종속변수로 설정하고 독립변수로는 정책수요(인터넷 이용률, 장애인 및 노인비율), 정책자원 투입(정보화 예산비율, 정보화 인력), 재정기반(재정자립도)을 설정하여 패널분석을 실시하였다. 분석 결과 정책 수요, 정책자원 투입, 정보화 역량 변수가 16개 광역자치단체의 웹 접근성 제고에 영향을 주는 것으로 나타났다. 나아가 본 연구는 패널분석 모형과 문헌연구를 통해 지방자치단체의 웹 접근성 제고를 위한 법제도 환경요소의 중요한 역할을 추론해 낼 수 있었다. 이러한 연구 결과를 바탕으로 웹 접근성 인식제고를 위한 노력, 표준 제정 및 관련 기술 개발 연구 확대, 웹 접근성 관련 인력양성 그리고 법 제도 개선을 정책제안으로 제시하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권3호
• /
• pp.392-399
• /
• 2017

Objective: The objectives were to assess the effects of purified lignin from wheat straw (sodium hydroxide dehydrated lignin; SHDL) on in vitro ruminal fermentation and on the growth performance of feedlot cattle. Methods: In vitro experiments were conducted by incubating a timothy-alfalfa (50:50) forage mixture (48 h) and barley grain (24 h) with 0, 0.25, 0.5, 1.0, and 2.0 mg/mL of rumen fluid (equivalent to 0, 2, 4, 8, and 16 g SHDL/kg diet). Productions of $CH_4$ and total gas, volatile fatty acids, ammonia, dry matter (DM) disappearance (DMD) and digestion of neutral detergent fiber (NDF) or starch were measured. Sixty Hereford-Angus cross weaned steer calves were individually fed a typical barley silage-barley grain based total mixed ration and supplemented with SHDL at 0, 4, 8, and 16 g/kg DM for 70 (growing), 28 (transition), and 121 d (finishing) period. Cattle were slaughtered at the end of the experiment and carcass traits were assessed. Results: With forage, SHDL linearly (p<0.001) reduced 48-h in vitro DMD from 54.9% to 39.2%, NDF disappearance from 34.1% to 18.6% and the acetate: propionate ratio from 2.56 to 2.41, but linearly (p<0.001) increased $CH_4$ production from 9.5 to 12.4 mL/100 mg DMD. With barley grain, SHDL linearly increased (p<0.001) 24-h DMD from74.6% to 84.5%, but linearly (p<0.001) reduced $CH_4$ production from 5.6 to 4.2 mL/100 mg DMD and $NH_3$ accumulation from 9.15 to $4.49{\mu}mol/mL$. Supplementation of SHDL did not affect growth, but tended (p = 0.10) to linearly reduce feed intake, and quadratically increased (p = 0.059) feed efficiency during the finishing period. Addition of SHDL also tended (p = 0.098) to linearly increase the saleable meat yield of the carcass from 52.5% to 55.7%. Conclusion: Purified lignin used as feed additive has potential to improve feed efficiency for finishing feedlot cattle and carcass quality.

• 한국식품저장유통학회지
• /
• 제12권1호
• /
• pp.62-67
• /
• 2005

양배추의 고부가가치 이용방안 연구의 일환으로 선택적 가열 및 추출특성이 알려진 마이크로파 에너지(50 W, 2,450 MHz)를 이용하여 양배추 추출물의 총 수율과 총 페놀 함량 및 전자공여능의 효율적 추출조건을 설정하였다. 에탄올$(50\%)$ 용매에서 건조 양배추의 입자 크기는 20 mesh 정도가 적당하였고, 시료와 용매비는 생체시료(수분 $90.2\%$)와 건조시료(수분 $4.5\%$) 모두에서 1:10(5 g/50 mL) 정도가 가장 타당한 것으로 나타났다. 추출용매의 영향에서는 생체시료에서는 $50\%$ 에탄올$>100\%$ 에탄올<물의 순으로, 건조시료에서는 $50\%$ 에탄올>물$>100\%$ 에탄올의 순으로 높은 추출수율을 보여주었다. 추출물의 총 페놀 함량과 전자공여능은 추출 3분 이후에는 거의 차이가 없는 경향을 보여주었고, 생양배추 시료에서는 $100\%$ 에탄올$>50\%$ 에탄올>물의 순으로, 건조 양배추 시료에서는 $50\%$ 에탄올>물$>100\%$ 에탄을 순으로 높은 함량을 보여주었다.