• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.2
• /
• pp.55-62
• /
• 1983

Four of non- isothermal methods evaluating kinetics have been studied by using differential scanning calorimetry (DSC) and thermogravimetry (TG) and applied for kinetics of the thermal decomposition of cellulose. It is concluded that the heating evolution methods with DSC and approximative methods with TC can lead to satisfactory kinetic analysis. Results calculating the reacting order and the activation energy of cellulose decomposition were 1/2 order and 42kcaB/mol, respectively.

• Journal of the Korean Chemical Society
• /
• v.63 no.1
• /
• pp.7-11
• /
• 2019

Olmutinib, N-[3-({2-[4-(4-methylpiperazine-1-yl)aniline]thieno[3,2-d]Pyrimidin-4-yl}oxy)phenyl]prop-2-enamide dihydrochloride monohydrate, $Olita^{TM}$ is an oral, third-generation epidermal growth factor receptor tyrosine kinase inhibitor (EGFR TKI) that was developed by Boehringer Ingelheim and Hanmi Pharmaceutical Co. Ltd for the treatment of non-small cell lung cancer (NSCLC). The aim of this work was to investigate the existence of polymorphs and pseudopolymorphs of olmutinib. Three crystal forms of olmutinib have been isolated by recrystallization and characterized by differential scanning calorimetry (DSC), thermogravimetric (TG) analysis and powder X-ray diffractometry (PXRD). From the DSC and TG data it was confirmed that Form 1 is monohydrate, Form 2 is dihydrate, Form 3 is 1.5 hydrate. The PXRD patterns of three crystal forms were different respectively. After storage of 1 month at $2^{\circ}C$, 24% RH (Relative Humidity), Form 1, Form 2, and Form 3 were not transformed.

• Archives of Pharmacal Research
• /
• v.28 no.6
• /
• pp.730-735
• /
• 2005

Nine polymorphic modifications of doxazosin mesylate have been obtained by recrystallization in organic solvents under variable conditions. Different polymorphs of doxazosin mesylate were characterized by powder X-ray crystallography diffractometry (PXRD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TG). Transformation of Form 1 and Form 2 was not occurred in three relative humidities ($0\%$, $51\%$, and $99\%$) at 20$\pm$0.5 for 30 days.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5492-5500
• /
• 2015

Low-density lipoprotein cholesterol (LDL-C) is a major modifiable risk factor for cardio- cerebrovascular disease. In clinical practice, however, it is primarily calculated using the Friedewald formula as a cost-effective method. The aim of this study was to compare Friedewald-estimated and directly measured LDL-C values and assess the concordance in guideline LDL-C risk classification between the two methods. The data were derived from the 2009 and 2010 Korea National Health and Nutrition Survey (KNHANES). Analysis was done for 4,319 subjects with lipid panels-total cholesterol (TC), high-density lipoprotein cholesterol (HDL-C), directly measured LDL-C using an enzymatic homogeneous assay, and triglycerides (TG). For subjects with TG lower than 400 mg/dL, Friedewald-estimated and directly measured LDL-C were highly correlated (r = 0.958, p < 0.001) and overall concordance was 82.7%. As TG increased, overall concordance decreased. Overall concordance was 85.4% at TG lower than 150 mg/dL; 78.2% at TG of 150-199 mg/dL; and 71.4% at TG of 200-399 mg/dL. The Friedewld equation tended to overestimate LDL-C when TG are of < 150 mg/dL; however, underestimate LDL-C when TG are of ${\geq}150mg/dL$. As a result, Friedewald estimation misclassified 382 subjects (9.1%) in a higher category versus 348 subjects (8.3%) in a lower category. Our findings suggest that overestimation of LDL-C by the Friedewald formula can be a great problem as well as underestimation.

• Journal of Embryo Transfer
• /
• v.30 no.3
• /
• pp.207-211
• /
• 2015

Many pronuclear stage eggs were used to generate transgenic mice (Tg) by microinjection. In this study, we used in vitro fertilized mouse eggs, followed by ultrarapid freezing to establish a simple procedure for production of Tg mice. We produced in vitro fertilized mouse eggs and cryopreserved them by ultrarapid freezing method. A total of 139 cryopreserved-thawed pronuclear eggs, of which 101 (72.6%) were survived following microinjection of chicken ${\beta}-actin$ promoter-driven firefly improved luciferase cDNA (${\beta}-act/luc^+$) and were transferred into 5 recipients. All recipients became pregnant and gave birth to a total of 15 (14.8%) pups. As a control, same DNA construction (${\beta}-act/luc^+$) was also injected into 450 in vitro fertilized eggs, of which 338 (75.1%) were survived and then were transferred into 14 recipients. Eleven (78%) mice became pregnant and littered a total of 54 (19.1%) pups. Southern blotting analysis of Tg mice indicated that one (1/15, 6.6%) and three (3/54, 5.5%) transgenic mice were production from cryopreserved and in vitro fertilized eggs, respectively. All Tg mice produced from both eggs showed the expression of improved luciferase gene. These results indicated that efficiency of produced of Tg mice from cryopreserved eggs was comparable to that from in vitro fertilized eggs. Furthermore, it is suggested that microinjection of transgene into in vitro fertilized eggs cryopreserved by ultrarapid freezing is an easy and conveniently method for production of Tg mice.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.5
• /
• pp.603-608
• /
• 2007

Optimal winterizing condition of com oil was cooling temperature of bleached oil from $105^{\circ}C$ to $40^{\circ}C$. Then, filtering it after keeping $1{\sim}2^{\circ}C$ by lowering the temperature gradually with treating perlite of 0.3%(w/w) amount about bleached oil and stirring. We could measure that triglyceride(TG) that extracted from lipid components from spent perlite(SP) obtained through filtration after winterizing by SACC method is major causing materials of clouding in com oil. The result of separating TG fraction by agentation TLC was that it classified into 4 kinds -U3, SU2, S2U, S3 type and the most were U3 type. From this, it's easy to identify cause of clouding in com oil is TG fraction and most of them form wax materials that can observed. The results were they kept clear appearance at $0^{\circ}C$ generally during 39.6 to 96.5 hours, especially the result of A sample that had the lowest temperature condition while they have some difference by condition of treating temperature.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.8-16
• /
• 2024

Limestone (CaCO₃, calcium carbonate), which is used as a raw material in the portland cement and steel industry, emits CO₂ through decarbonation by high temperatures in the manufacturing process. To reduce CO₂ emissions by the use of raw materials like limestone, it has been proposed to replace limestone with various industrial by-products that contain CaO but less or none of the carbonated minerals, that cause CO₂ emissions. Loss of Ignition (LOI), Thermogravimetric analysis (TG), and Infrared Spectroscopy (IR) are used to quantitative the amount of CO₂ emission by using these industrial by-products, but CO₂ emissions can be either over or underestimated depending on the characteristics of by-product materials. In this study, we estimated CO₂ contents by LOI, TG, IR and DTG(Differential Thermogravimetric analysis) of calcite(CaCO₃) and samples that contain CO₂ in the form of carbonate and whose weight increases by oxidation at high temperatures. The test results showed for CaCO₃ samples, all test methods have a sufficient level of reliability. On the other hand, for the CO₂ content of the sample whose weight increases at high temperature, LOI and TG did not properly estimate the CO₂ content of the sample, and IR tended to overestimate compared to the predicted value, but the estimated result by DTG was close to the predicted valu e. From these resu lts, in the case of samples that contain less than a few percent of CO₂ and whose weight increases during the temperature that carbonate minerals decompose, estimating the CO₂ content using DTG is a more reasonable way than LOI, TG, and IR.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.3
• /
• pp.197-213
• /
• 2001

Conjugate trienoic acids (CTA) occurred in triacylglycerols (TGs) of the seed oils of Trichosanthes kirilowii, Momordica charantia and Aleurites fordii, and they were easily converted to their methyl esters in a mixture of sodium methoxide-methanol without any structural destruction. The main fatty acids in triacylglycerol (TG) fraction of the seed oils of Trichosanthes kirilowii are $C_{18:2{\omega}6}$ (32.2 mol %), $C_{18:3{\;}9c.11t,13c}$ (38.0 mol %) and $C_{18:1{\omega}9}$ (11.8 mol %), followed with $C_{16:0}$ (4.8 mol %) and $C_{18:0}$ (3.1 mol %). The TG fraction was resolved into 20 TG molecular species according to the partition number (PN) by reversed-phase (RP)-HPLC. The main TG species were $DT_{c2}$, $MDT_{c}$ and $D_{2}T_{c}$, of which amounts reached 63 mol % of total TG molecular species. The TG sample was fractionated into 11 fractions according to the number of double bond in the molecule by $Ag^{+}-HPLC$ and the species of $DT_{c2}$, $MDT_{c}$ and $D_{2}T_{c}$ were also eluted as main components. The TG species containing CTA showed unusual behaviours in the order of elution by HPLC ; first, TG moleular species of $DT_{c2}$ (D; dienoic acid, $T_{c}$; punicic acid, $T_{ci}$; ${\alpha}-eleostearic$ acid, M ; monoenoic acid, $S_{t}$; stearic acid) was eluted earlier than $Mt_{c2}$, although they have the same PN number of 40, and, secondly, the species of $DT_{ci2}$ with eight double bonds was eluted earlier than that of $D_2T_{ci}$ with seven double bonds. Intact TG of the seed oils of Momordica charantia contained mainly fatty acids such as $C_{18:3{\omega}9c,11t,13t}$ (57.7 mol %), $C_{18:1{\omega}9}$ (17.4 mol %), $C_{18:0}$ (12.3 mol %) and $C_{18:2{\omega}6}$ (10.6 mol %), and was classified into 13 fractions by RP-HPLC. The main TG species were as follows ; $MT_{ci2}$ [$(C_{18:1{\omega}9})(C_{18:3\;9c,11t,13t})_{2}$, 39.1 mol %] and $S_{t}T_{ci2}$ [$(C_{18:0})(C_{18:3\;9c,11t,13t})_2$, 33.9 mol %] comprising about 73 mol % of total TG species, accompanied by $DT_{ci2}$ [$(C_{18:2{\omega}6})(C_{18:3\;9c,11t,13t})_{2}$, 7.3 mol %], $D_{2}T_{ci}$ [$ (C_{18:2{\omega}6})_{2}(C_{18:3\;9c,11t,13t})$, 3.6 mol %] and $MDT_{ci}$ [$(C_{18:1{\omega}9})(C_{18:2{\omega}6})(C_{18:3\;9c,11t,13t})$, 3.5 mol %]. Simple TG species of $T_{ci3}$ [$(C_{18:3\;9c,11t,13t})_3]$ was present in a small amount of 1.4 mol %, but other simple TG species were not detected. The TG was also resolved into 11 fractions according to the number of double bond by $Ag^{+}-HPLC$, and the species were mainly occupied by $MT_{ci2}$ [$(C_{18:1{\omega}9})(C_{18:3\;9c,11t,13t})_{2}$, 39.4 mol %] and $S_tT-{ci2}$ [$(C_{18:0})(C_{18:3\;9c,11t,13t})_{2}$, 35.4 mol %] $DT_{ci2}$ species with eight double bonds was also developed faster than $D_2T_{ci}$ one with seven double bonds as indicated in the analysis of TG of the seed oils of T. kirilowii, and $MT_{ci2}$ species with cis, trans, trans-configurated double bond was eluted earlier than $MT_{c2}$ species with cis, trans, cis-configurated double bond. The main components of fatty acid in total TG fraction isolated from the seed oils of of Aleurites fordii were in the following order ; $C_{18:3\;9c,11t,13t}$ (81.2 mol %)> $C_{18:2{\omega}6}$ (8.5 mol %)> $C_{18:1{\omega}9}$ (5.4 mol %)$. With resolution of the TG by RP-HPLC, eight fractions such as $T_{ci3}$, $Dt_{ci2}$, $D_{2}T_{ci}$, $MT_{ci2}$, $PT_{ci2}$ (P; palmitic acid), $PMT_{ci}$, $PDT_{ci}$ and $S_{t}T_{ci2}$ ($S_{t}$; stearic acid) were isolated, respectively. TG species of $T_{ci3}$ [$(C_{18:3\;9c,11t,13t})_{3}$, 54.2 mol %], $DT_{ci2}$ [$(C_{18:2{\omega}6})(C_{18:3\;9c,11t,13t})_{2}$, 15.0 mol %] and $MT_{ci2}$ [$(C_{18:1{\omega}9})(C_{18:3 9c,11t,13t})_{2}$, 14.8 mol %] were present as main species.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.250-251
• /
• 2014

With the recent movement toward sustainable development, many efforts have been made to reduce environmental loads in various domains of industry. In particular, a great deal of research and technology development has been underway on approaches to reducing industrial waste and the emission of greenhouse gases. For this reason, a quantitative analysis of the reduction in CO₂ emission that could be achieved by replacing limestone material with cementitious waste powder was performed in this study. Through the analysis, it was found that CO₂ emissions were reduced by up to 50 percent compared with the scenario in which OPC was used, which suggests that it is possible to reduce global CO₂ emissions by approximately 5percent, or by 446.4 Tg of the 965 Tg of CO₂ emissions generated by the cement industry, in the total global CO₂ emissions of 19300Tg.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.229-233
• /
• 1997

Estimation of thermal stability for diglycidy1 ether of bisphenol A(DGEMA)/4, 4'-methylene dianiline (MDA)/pheny1 glycidy1 ether(PGE)-acetamide(AcAm)/carboxy1-terminated acrylonitrile butadiene copolymer (CTBN) system was studied by thermogravimetry(TG) analysis. To get activation energy for thermal degradation, Freeman & Carroll, Kissinger, and Flynn & Wall expressions were used. The activation energy of Freeman & Wall expression was 112.9kj/mol, that of Kissinger expression was 151.5 kj/mol and that of Flynn & Wall was 168.3kj/mol.