• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.51-54
• /
• 2007

Top-emission 3.5 inch qVGA IOD (Inverted AMOLED) was fabricated with inverted EL structure driven by a-Si TFT backplane. In order to get stable driving TFT, we used FCP(Field Control Plate) layer which was connected with the source of the driving TFT. And we developed planarization process to planarize the cathode layer which was the bottom layer of inverted OLED. Our unique IOD structure is “a-Si TFT/ Al(Cathode)/ LiF/ LG-201(ETL)/ EML(RGB)/ HTL/ LG-101(HIL & Buffer layer)/ IZO(Anode)”. LG-201(ETL) layer was studied for more efficient electron injection from cathode to EML, and LG-101(HIL & Buffer layer) covered by IZO anode was also explored for decreasing the EL surface damage.

• 한국컴퓨터정보학회논문지
• /
• 제12권4호
• /
• pp.249-256
• /
• 2007

본 논문에서는 휴대 가능한 중소형($4{\sim}9$인치 크기)의 정보단말기에 사용되는 TFT-LCD(Thin Film Transistor addressed -Liquid Crystal Display)의 LDI(LCD Driver Interface) 제어기(controller)를 제조사와 크기에 관계없이 사용할 수 있는 표준화된 범용 TFT-LCD의 LDI를 설계하고 FPGA(Field Programmable Gate Array)로 구현하였다. 설계한 LDI 제어기는 FPGA 테스트 보드(test board)에서 검증하였으며, 상업용 TFT-LCD 패널에서 시험결과 안정적으로 상호 동작하였다. 설계한 범용 LDI 제어기의 장점은 LCD의 제조사와 크기에 관계없이 그 동작을 표준화시켜 설계하였으므로 향후 모든 패널내의 SoG(System on a Glass) 모듈 설계에 적용할 수 있는 것이다. 그리고 기존의 방식에서는 LCD 제조사별, 패널 크기별로 별개의 LDI 제어기 칩을 개발하여 사용하지만, 설계한 LDI 제어기는 모든 휴대 가능한 중소형 패널을 구동시킬 수 있어서 IC의 공급가, AV 보드와 패널의 제조 원가 하락을 가져올 수 있으며 가까운 장래에는 보다 우수한 기능의 패널을 제작하기 위한 TFT-LCD 패널 모듈의 SoG 개발이 필연적으로 요구되고 있다. 연구결과는 TFT-LCD 패널을 더욱 소형화, 경량화 그리고 저가격화가 가능하여 기술 및 시장 경쟁력을 선점할 수 있다. 또한 향후 많은 수요가 예상되는 이동형 정보단말기에 사용되는 TFT-LCD 패널 모듈의 SoG IC(Integrated Circuit) 개발과 제작을 위한 기초 자료로서 활용될 수 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.205-207
• /
• 2008

The new process for hybrid silicon thin film transistor (TFT) using DPSS laser has been developed for realizing both low-temperature poly-Si (LTPS) TFT and a-Si:H TFT on the same substrate as a backplane of active matrix liquid crystal display. LTPS TFTs are integrated on the peripheral area of the panel for gate driver integrated circuit and a-Si:H TFTs are used as a switching device for pixel in the active area. The technology has been developed based on the current a-Si:H TFT fabrication process without introducing ion-doping and activation process and the field effect mobility of $4{\sim}5\;cm^2/V{\cdot}s$ and $0.5\;cm^2/V{\cdot}s$ for each TFT was obtained. The low power consumption, high reliability, and low photosensitivity are realized compared with amorphous silicon gate driver circuit and are demonstrated on the 14.1 inch WXGA+ ($1440{\times}900$) LCD Panel.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.945-954
• /
• 2004

Recently, specifications of flat display module is going to be higher definition, brightness and more wide viewing angle. On the other hand, physical thickness of those modules is forced to be slimmer and lighter. The flat display modules such as plasma or TFT-LCD employ thin crystallized panels that are normally weak to high level transient mechanical energy inputs. As a result, anti-shock performance is one of the most important design specifications of TFT-LCD modules. TFT-LCD module manufacturers and their customers like PC or TV makers perform a series of strict impact/drop test for the modules. However most of the large display module designs are generated based on engineer's own trial-error experiences. Those designs may result in disqualification from the drop/impact test during final product evaluation. A rigorous study on the impact failure of the displays is of course necessitated in order to avoid the problems. In this article, a systematic design evaluation is presented with combinations of FEM modeling and testing to support the optimal shock proof display design procedure.

• 대한전자공학회논문지SD
• /
• 제38권12호
• /
• pp.25-35
• /
• 2001

복잡한 thin film transistor-liquid crystal display (TFT-LCD) array 회로의 전기적 특성을 분석하기 위해서는 PSPICE나 AIM-SPICE와 같은 회로 시뮬레이터를 사용하는 것이 필수적이다. 본 논문에서는 SPICE 시뮬레이션을 위한 다결정 실리콘 (poly-Si) TFT 소자의 입력 변수 추출을 체계화하는 방법을 도입한다. 이 방법을 excimer laser annealing 및 silicide mediated crystallization 방법으로 각각 제작된 다결정 실리콘 TFT 소자에 적용하여 실험 결과와 잘 일치하는 결과를 얻었다. SPICE 시뮬레이터 중에서 PSPICE는 graphic user interface(GUI) 방식의 편의성을 제공하므로 손쉽게 복잡한 회로를 구성할 수가 있다는 장점이 있으나, poly-Si TFT 소자 모델을 가지고 있지 않다. 이 연구에서는 PSPICE에 다결정 실리콘 TFT 소자 모델을 이식하고, TFT가 이식된 PSPICE를 사용하여 poly-Si TFT-LCD 단위 화소 및 라인 RC 지연을 고려한 화소에 대한 전기적 특성을 분석하였다. 이러한 결과는 TFT-LCD 어레이 특성 분석을 위한 시뮬레이션을 효율적으로 수행하는데 기여할 수 있을 것으로 기대된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1809-1811
• /
• 1999

In recent years, attempts have been made to greatly improve the display quality of active-matrix liquid crystal display devices, and many techniques have been proposed to solve such problems as gate delay, feed-through voltage and image sticking. Gate delay is one of the biggest limiting factors for large-screen-size, high-resolution thin-film transistor liquid crystal display (TFT/LCD) design. Many driving method proposed for TFT/LCD progress. Thus we developed gate driving signal generator. Since Pixel-Design Array Simulation Tool (PDAST) can simulate the gate, data and pixel voltages of a certain pixel on TFT array at any time and at any location on an array, the effect of the driving signals of gate lines on the pixel operations can be effectively analyzed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1272-1275
• /
• 2008

We present the development of dry etch process for the liquid crystal display (LCD) fabrication using a dielectric barrier discharge (DBD) system at atmospheric pressure. In this experimental work, the dry etch characteristics and the electrical properties of thin film transistor are evaluated by using the scanning electron microscopy and electric probe, and TFT-LCD panel ($300\;mm\;{\times}\;400\;mm$) is manufactured with the application of the amorphous silicon etch step in the 4 mask and 5 mask processes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.988-990
• /
• 2005

A 5.0-inch plastic TFT-LCD with the resolution of $400{\times}3{\times}300$ lines (120ppi) was developed. The device is a transmissive type with the transparent PES plastic substrates. The PES films with one side barrier coating were used for the device. In order to produce the high resolution display device, the alignments between all the layers for the TFT and CF are essential. The fundamental shrinkage effect and the thermal expansion behavior of the plastic substrates with and without the barrier coatings were studied. The proper annealing processes followed by immediate second bar-rier coating processes provide the optimal alignment between all the layers of the TFT and CF..

• Journal of Information Display
• /
• 제2권3호
• /
• pp.32-38
• /
• 2001

The most important parameter for TV application of LCD is a fast switching time for the display of moving image. To achieve faster switching time, the novel LC single materials with large dielectric anisotropies ($16{\sim}20$), high clearing temperatures ($195.5{\sim}237.4^{\circ}C$), broad nematic ranges (up to 169.9 $^{\circ}C$) and high birefringence ($0.254{\sim}0.2200$) were developed. KUR-series LC mixtures blended these single materials having significantly higher clearing temperatures and dielectric anisotropy values compared with conventional LC mixture. Especially, their clearing temperatures are $10{\sim}30^{\circ}C$ higher than their host mixture. These LC mixtures showing about lOms of high-speed switching time in Tv/Monitor of TFT LCD, is short enough to be addressed in a single time frame of 60Hz (16.7 ms). The threshold voltage $V_{th}$ was low enough to operate at a driving voltage of 5 V. The VHR values were found to be high enough for TFT-LCD in wide temperature range. Our novel LC mixtures are suitable materials for the inclusion in to LC mixtures for TV application of TN-LCD

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.597-600
• /
• 2006

The silver gate and source/drain electrodes for an a-Si thin film transistor were fabricated by the selective electroless plating (SELP) process. Relevant physical properties including taper angle, uniformity and resistivity are investigated. The Ag layer was about 150nm to 250nm thick, the resistivity less than $3{\times}10^{-6}$ Ohm-cm and the taper angle 45'-60' and the nonuniformity less than 10% on G2 substrates. The transfer characteristics with the Ag gate, and source/drain electrodes respectively possessed good field effect mobility similar to conventionally fabricated a-Si TFTs. This process provided low resistivity, low cost and ease of processing.