• Journal of Korea Foundry Society
• /
• v.31 no.6
• /
• pp.366-370
• /
• 2011

The influence of aging treatment on the microstructure, mechanical and electrical properties of Cu-Be alloy for connector material applications was investigated. The properties of mechanical strength and electrical conductivity were found to increase with increasing aging temperature. By the way, SEM/EDS and TEM analysis exhibited that beryllides precipitation (CoBe and NiBe) with a size of 50 nm were distributed in grains. It was, therefore concluded that these beryllide precipitates improved the mechanical strength and also it was favor in increasing of electrical conductivity.

• Journal of the Korean Ceramic Society
• /
• v.47 no.4
• /
• pp.338-342
• /
• 2010

Co, $Fe_3O_4$ and Co/$Fe_3O_4$ nanoparticles were synthesized by a polyol process in order to develop their new applications and improve chemical, magnetic properties. The synthesis involved a polyol process using Fe, Co acetylacetonate as precursors and 1-2 hexadecanediol as the polyol. The synthesized $Fe_3O_4$ and Co/$Fe_3O_4$ nanocomposite particles were monodispersed and self arrayed ranging in size of 8~10 and 10~25 nm, respectively. The Co nanoparticle has a crystallite size of 10~40 nm. The synthesized nanoparticles were characterized by their structural, morphological, compositional and magnetic properties using TEM-EDS, XRD, and PPMS techniques.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.356-356
• /
• 2011

탄소나노튜브(CNT)는 기계적, 전기적, 열적성질이 매우 우수하여 다양한 응용이 기대되고 있다. CNT를 금속기판에 직접 합성시킬 경우 CNT와 금속기판의 계면에서 높은 전도성 및 물리적 접착 강도를 기대할 수 있어서, 전계방출(field emission) 소자 또는 방열(heat dissipation) 소자 등과 같은 CNT의 높은 전도성과 일차원적 구조를 이용하고자 하는 분야로의 응용가능성을 높일 수 있다. 본 연구에서는 CNT의 합성촉매로 주로 사용되고 있는 니켈을 주요 성분으로 함유하고 있는 Inconel, Hastelloy, Invar 등을 합성기판으로 선정하여, CNT의 합성 거동을 조사하였다. CNT 합성은 CVD방법을 이용하였으며, 아세틸렌가스를 원료가스로 이용하였다. 합성 전 기판의산화 전처리가 CNT합성 효율에 영향을 미치는 것을 확인하였으며, 이를 체계적으로 조사하기 위하여, 다양한 온도(425~725$^{\circ}C$) 구간에서 산화 전처리를 실시한 후 CNT의 합성 거동을 조사하였다. 산화과정에 의한 표면구조의 변화 및 표면에서 금속성분의 재배열이 CNT합성 효율 변화의 원인으로 사료되고 있으며, 이를 분석하기 위해서, AFM, XRD, EDS, SEM, TEM 등을 이용하였다. 본 연구결과는 향후 전자방출소자, X-ray source 및 방열소자 등의 응용에 유용할 것으로 기대된다.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.5
• /
• pp.248-254
• /
• 2010

Porous $Al_2O_3$ film can be utilized as template for fabrication of nano-structured materials. Porous anodic alumina layer as template was prepared by anodization of aluminum in oxalic acid, and the pore diameter and barrier-type alumina layer can be controlled for proper anodizing parameter by widening process in $H_3PO_4$ solution. The $SiO_2$ nanodot and Ni nanowire was fabricated using anodic alumina template and their characteristics were investigated using SEM and TEM with EDS. Especially the growth mechanism of $SiO_2$ nanodot in alumina membrane compared with thinning of the alumina barrier layer during anodization was also investigated.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.6
• /
• pp.703-708
• /
• 1999

Silicides have been used extensively in ULSI logic device fabrication as contact materials for the active areas as well as the poly- Si gates. NiSi is a promising candidate for submicron device application due to less volume expansion, low formation temperature, little silicon consumption, and large stable processing temperature window. In this report, the microstructure of nickel silicides fabricated with a thermal evaporator has been investigated. We observed systematic transformation of Ni silicides of $Ni_2$Si, NiSi, $NiSi_2$, as annealing temperature increases. All the silicides have been identified by a X-ray diffractometer (XRD). The cross-sectional microstructure of silicides was examined by a transmission electron microscope (TEM) equipped with a energy dispersive spectrometer(EDS). The surface roughness of silicides was measured by scanning probe microscope(SPM). Although we observed thin oxide layer existed at the $Ni/NiSi_{x}$ interface, we fabricated successfully $550\AA$-thick planar Ni-monosilicide at the temperature range of$ 400~700^{\circ}C$.

• Journal of Korea Foundry Society
• /
• v.9 no.4
• /
• pp.320-326
• /
• 1989

Titanium-Boron-Aluminium master alloys are used extensively to grain-refine a wide range of aluminium alloys. This experiment was performed by various amounts of AlTi5B1 addition to the technical aluminium alloys, and also by changing cast temperature and hold time of the melts. The macrostructures were shown that with increasing the addition of AlTi5B1 to the melts, the grain became finer. In the case of cast temperature high enough over $900^{\circ}C$, the grain became coarser, but hold time change not affected on the grain refinement. Particles of $TiAl_3$, and $TiB_2$ were found in the grains and grainboundaries. The important role of grain refinement in this experiment were mainly $TiAl_3$, and also $TiB_2$ those have been confirmed in TEM, SEM, EDS, WDX and X-ray diffraction.

• Journal of the Korean Ceramic Society
• /
• v.32 no.12
• /
• pp.1417-1423
• /
• 1995

α/β sialon based composites containing silicon nitride whisker and silicon carbide platelet were fabricated by hot pressing. Effect of the reinforcing agents on the α to β phase transformation of the sialon as well as on the mechanical properties was investigated. Silicon nitride whisker and silicon carbide platelet promoted the phse transformation. TEM/EDS analysis revealed that the grain containing the whisker had 'core-rim' structure; core being high purity Si3N4 whisker and rim being β-sialon. Flexural strength of the composite decreased with the reinforcement addition which, on the other hand, improved fracture toughness of it. High temperature strength was measured at 1300℃ to be about 130 MPa lower than that measured at RT for the whisker reinforced composites.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.151-156
• /
• 2010

In this paper, we characterized bimetallic Pt-Ru/C alloy catalysts having four different compositions and compared the catalytic activities of the prepared alloys for CO oxidation. ICP-AES, EDS, XRD, TEM, and XAS were used to investigate the composition, degree of alloying, particle size, and electronic structure of the prepared Pt-Ru/C catalysts. Those results indicated the synthesis of the alloy catalysts with intended composition and uniform size. The electrochemical study of the characterized alloys showed higher catalytic activity for CO oxidation than that of the commercial Pt/C (E-TEK, Inc., 20 wt %) catalyst. Especially, it was shown that the alloy catalyst with Ru composition of 50 atomic % gave the highest catalytic activity for CO oxidation.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3145-3150
• /
• 2010

Ruthenium catalysts modified by selenium have been introduced as alternative materials to Pt in Direct methanol fuel cells (DMFCs). RuSe nano-particles were synthesized on the Vulcan XC72R carbon supports via polyol method. The prepared catalysts were electrochemically and physically characterized by cyclic voltammetry (CV,) linear sweep voltammetry, methanol tolerance test, X-ray diffraction (XRD), Transmission electron microscopy (TEM), Energydispersive Spectrometer (EDS) and X-ray photoelectron spectroscopy (XPS). Increasing the Se concentration up to 20 at % increased the electro-catalytic activity for the oxygen reduction. By increasing Se amount, Ru metallic form on the surface was increased. The $Ru_{80}Se_{20}$/C catalysts showed the highest oxygen reduction reaction (ORR) activity and outstanding methanol tolerant property in half cell tests as well as single cell test.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.39-42
• /
• 2013

자동차 및 에너지 산업의 적용을 목표로 고망간강의 기계적 성질 향상 연구가 활발히 진행된 반면 내식성 연구는 미비하다. 본 연구에서는 염수 환경 및 H2S 환경에서 4종의 고망간강의 내식성에 미치는 크롬 및 망간의 영향을 조사하였다. 비교재로 사용된 탄소강 대비 실험재의 부식 속도는 침지 실험을 통해 얻어졌다. 또한 내식성 기구 고찰을 위하여 상평형 프로그램을 통하여 녹 층을 예측하고, 침지실험으로부터 얻어진 녹 층을 XRD, SEM-EDS 및 TEM-EDS로 분석하였다. 3.5% NaCl 용액에서 크롬 및 망간이 모두 내식성을 향상시킨 반면, synthetic seawater에서는 크롬만이 내식성을 향상시켰다. 또한 이들 염수 환경과 달리 H2S 환경에서 크롬과 망간 모두 내식성을 향상시키지 못했다. 환경에 따라 강의 내식성에 미치는 합금 원소의 영향이 상이한 원인은 각각의 환경에서 형성된 녹층의 구성 물질의 차이에 의한 것으로 이에 대하여는 본문의 된 녹 층 분석 결과에서 자세히 설명되었다.