• Korean Journal of Poultry Science
• /
• v.16 no.2
• /
• pp.83-89
• /
• 1989

This study was conducted to estimate heritabilities, genetic and phenotypic correlations on egg compositions in layers. The data analysis were a total of 6,097 eggs in S. C. W. Leghorn and R. I. Red from March 1, 1980 to July 31, 1981. The results obtained are summarized as follows； 1. The average albumen weight at first egg, 300 and 500 days of age were 28.67, 36.25 and 37.51g in the S. C. W. Leghorn, and 28.95, 36.01 and 36.85g in the R. I. Red, respectively. The yolk weigh at first egg ,300 and 500 days were 9.21, 15.94 and17.86g in the S. C. W. Leghorn,9.46, 16.43 and 18.54g in the R. I. Red, respectively. The shell weight at first egg, 300 and 500 days were 4.04, 5.39 and 5.40g in the S. C. W. Leghorn, and 3.66, 5.13 and 5.28g, respectively. 2. The heritability estimates based on the variance of sire and dam components were 0.631-0.164 and 0.412-0.496 in the S. C. W. Leghorn,0.234-0.563 and 0.477-0.610 in the R. I. Red for albumen weight； 0.213-0.530 and 0.343-0.613 in the S. C. W. Leghorn, 0.253-0.437 and 0.389-0.477 in the R. I. Red for yolk weight； 0.427-0.602 and 0.336-0.409 in the S. C. W. Leghorn, 0.141-0.281 in the R. I. Red for shell weight, respectively. 3. The genetic correlation coefficients of egg compositions were as follows； In the S. C. W. Leghorn and R. I. Red, the coefficients between albumen weight and yolk weight, 0.082-0.339 and 0.142-0.465； between albumen weight and shell weight, 0.674-0.952 and 0.216-0.546； between yolk weight and shell weight,0.173-0.171 and 0.121-0.749, respectively.

• Journal of the Korean Vacuum Society
• /
• v.18 no.2
• /
• pp.108-115
• /
• 2009

The superlattice infrared photodetector (SLIP) with an active layer of 8/8-ML InAs/GaSb type-II strained-layer superlattice (SLS) of 150 periods was grown by MBE technique, and the proto-type discrete device was defined with an aperture of $200-{\mu}m$ diameter. The contrast profile of the transmission electron microscope (TEM) image and the satellite peak in the x-ray diffraction (XRD) rocking curve show that the SLS active layer keeps abrupt interfaces with a uniform thickness and a periodic strain. The wavelength and the bias-voltage dependences of responsivity (R) and detectivity ($D^*$) measured by a blackbody radiation source give that the cutoff wavelength is ${\sim}5{\mu}m$, and the maximum Rand $D^*$ ($\lambda=3.25{\mu}m$) are ${\sim}10^3mA/W$ (-0.6 V/13 K) and ${\sim}10^9cm.Hz^{1/2}/W$ (0 V/13 K), respectively. The activation energy of 275 meV analyzed from the temperature dependent responsivity is in good agreement with the energy difference between two SLS subblevels of conduction and valence bands (HH1-C) involving in the photoresponse process.

• The Korean Journal of Malacology
• /
• v.23 no.2
• /
• pp.209-216
• /
• 2007

The ovarian structure and ultrastructural changes in germ cells during oogenesis of the spiny top shell, Batillus cornutus, have been investigated by light and electron microscopic observations. Specimens of the spiny top shell were collected from the subtidal zone of Wando, south coast of Korea. Spiny top shell was dioecious. The ovary was located on the surface of the hepatopancreas in the spiral posterior region. The ovary had greenish color in the gonadal mature season. The ovary comprised many ovarian lobules, and the ovarian lobule consisted of connective mesenchymal tissue and epithelial cells. Oogonium had a large nucleus with nucleolus of high electron density. In previtellogenic oocyte, small yolk granules of low electron density were scattered in the cytoplasm. Oocytes in the initial vitellogenic stage were connected with the ovarian lobule by egg stalk. The result of TEM observations showed that initial vitellogenic oocyte contained well-developed Golgi complex, endoplasmic reticula, tubular mitochondria and numerous yolk granules of various electron densities and sizes. The electron density, size and quantity of yolk granules which were distributed in the active vitellogenic oocyte were increased compared to the previous stage. Thickness of egg envelope in the late active vitellogenic oocyte was approximately 4.4 $[\mu}m$. Cytoplasm of ripe oocyte was filled with proteid yolk globules of high electron density and lipid yolk globules of low electron density. In this stage, the thickness of egg envelope was approximately 6.5 ${\mu}m$.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.2
• /
• pp.102-110
• /
• 2001

To establish an accurate asbestos analysis method for workplace samples, chrysotile, amosite, crocidolite, tremolite, actinolite, and anthophyllite asbestos fibers were analyzed for their morphology, atomic content and electron diffraction patterns. The morphology of asbestos fiber was evaluated in $10,000{\times}$ magnification. The atomic contents was analyzed by X-ray analyzer (TEM-EDX). Asbestos fibers were further assessed using electron diffraction (ED) patterns to provide an additional criterion for classifying the asbestos fibers. Twenty asbestos fibers were initially randomly selected for morphological evaluation; based on an aspect ratio (length : diameter = 3:1). Then the fibers were determined for their EDX spectrums and ED patterns. Our results showed that only chrysotile fiber has a hollow tube structure to be distinguished from other asbestos fibers. Although asbestos fibers had similar morphology, they had different EDX spectrums and ED patterns. Our results on the atomic content of asbestos fibers were very similar to those of other researchers, but amosite and crocidolite had a little difference in atomic content compared with the results from other researchers. The difference may be due to the difference in equipment or asbestos sample selection. A study on asbestos samples from biological specimens to establish a criterion for determining occupational asbestos exposed diseases should be done in the near future.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.3
• /
• pp.114-118
• /
• 2011

We report on the growth and characterization of nano and micro scale GaN structures selectively grown on the vertex of hexagonal GaN pyramids. $SiO_2$ near the vertex of hexagonal GaN pyramids was removed by optimized photolithgraphy process and followed by a selective growth of nano and micro scale GaN structures by metal organic vapor phase epitaxy (MOVPE). The pyramidal GaN nano and micro structures which have crystal facets of semi-polar {1-101} facets were formed only on the vertex of GaN pyramids and the size of the selectively grown nano and micro GaN structures was easily controlled by growth time. As a result of TEM measurement, Reduction of threading dislocation density was conformed by transmission electron microscopy (TEM) in the selectively grown nano and micro GaN structures. However, stacking faults were newly developed near the edge of $SiO_2$ film because of the roughness and nonuniformity in thickness of the $SiO_2$ film.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.6
• /
• pp.93-102
• /
• 2008

Experimental studies were conducted to characterize the synthesized nanoscale zero-valent iron (NZVI) which is resistant to oxidation in the atmospheric environment. XRD, XPS, and TEM analyses revealed that the oxidation-resistant NZVI particles formed under various controlled air contact conditions (4, 8 and 12 mL/min) have shells with ${\sim}$5 nm thickness. The shells consist of magnetite (${Fe_3}{O_4}$) and maghemite (${\gamma}-{Fe_2}{O_3}$), predominantly. No substantial differences were found in the shell components and thickness among NZVI particles formed under the various air flow rates. On the other hand, shell was not detected in the TEM image of rapidly oxidized NZVI particles. NZVI particles synthesized under the various air flow rates showed similar TCE degradation performances ($k_{obs}$= 0.111, 0.102, and 0.086 $hr^{-1}$), which are equivalent to approximately 80% of those obtained by the fresh NZVI particles. TCE degradation efficiencies of the NZVI particles(fresh, controlled air contact and rapidly oxidized) were improved after equilibrating with water for one day, indicating that depassivation of the shells occurred. The performances of NZVI particles decreased to 90% and 50% of those of the fresh NZVI particles, when they were equilibrated with the atmosphere for a week and two months, respectively. The NZVI particles synthesized under the controlled air contact would have advantages over traditional NZVI particles in terms of practical application into the site, because of their inertness toward atmospheric oxygen.

• Korean Journal of Veterinary Research
• /
• v.32 no.3
• /
• pp.381-387
• /
• 1992

Gill epithelia of normal rainbow trout fingerlings and abnormal ones suffering bacterial gill disease by experimental infection were examined by transmitting electron microscopy (TEM) and scanning electron microscopy (SEM). TEM observations revealed that Flavobacterium branchiophila consisted of slender rods measuring 0.5 by 5 to $8{\mu}m$, and they had which were long, thin, flexible filaments measuring approximately 4 nm by $1{\mu}m$, and packed together to organize into bundles. Morphological alterations of the diseased epithelia started at hypertrophy of the lamellar epithelium. F branchiophila attached to the gill surface of infected fish through pili with a regular distance, and did not invade into gill tissue. In SEM observations, normal surface ultrastructure of epithelial cell in the outermost layer were characterized by a typical labyrinth-like structure branching and anastomosing microridges on the cell surface. Hyperplastic lesions in experimentally infected gill were most serious at near the tips. Each filament exhibited a club-like, and fusion between the filaments was sometimes observed at their tips. On the surface of gill filaments, thread-like bacterial cells attached and were entangled. The bacterial cells almost covered the surface. After immersion in 5 % NaCl, the cell of F branchiophila, however, appeared to be indeterminate shape.

• Korean Journal of Microbiology
• /
• v.43 no.1
• /
• pp.31-39
• /
• 2007

This study has been carried out for investigating the relatedness of representative 135 Shigella sonnei strains isolated from 2000 to 2004 by using biotyping and antimicrobial resistance. All strains showed typical biochemical characterisics of Shigella strain. Among 135 strains,79 (58.5%) strains were biotype "g",54 (40.0%) strains were biotype "a" and 2 (1.5%) strains were biotype "e". The results of susceptibility test against 16 antimicrobial agents were like this. Most of strains were susceptible to AN, CIP, C and GM. 129 (95.6%) strains were resistant to SXT, 126 (93.3%) strains were resistant to TE and 122 (90.4%) strains were resistant to SM. One hundred thirty two (97.8%) strains were resistant to more than two antimicrobial agents. R28 type (antimicrobial resistance patterns 28: resistant to AM, SAM, TE, TIC, SXT, K, SM and AmC) were 42 strains (31.1%). The other strains were showed 33 kinds of R patterns. The results of $bla_{TEM}$, sulII, tetA and strA gene detection were coincided with phenotype of antimicrobial resistance by disk diffusion method. But some strains which had sulII and strA genes were not showed the resistance against SXT and SM.

• Korean Journal of Materials Research
• /
• v.10 no.9
• /
• pp.601-606
• /
• 2000

Nickel mono-silicide(NiSi) shows no increase of resistivity as the line width decreases below 0.15$\mu\textrm{m}$. Furthermore, thin silicide can be made easily and restrain the redistribution of dopants, because NiSi in created through the reaction of one nickel atom and one silicon atom. Therefore, we investigated the deposition condition of Ni films, heat treatment condition and basic properties of NiSi films which are expected to be employed for sub-0.15$\mu\textrm{m}$ class devices. The nickel silicide film was deposited on the Si wafer by using a dc-magnetron sputter, then annealed at the temperature range of $150~1000^{\circ}C$. Surface roughness of each specimen was measured by using a SPM (scanning probe microscope). Microstructure and qualitative composition analysis were executed by a TEM-EDS(transmission electron microscope-energy dispersive x-ray spectroscope). Electrical properties of the materials at each annealing temperature were measured by a four-point probe. As the results of our study, we may conclude that; 1. SPM can be employed as a non-destructive process to monitor NiSi/NiSi$_2$ transformation. 2. For annealing temperature over $800^{\circ}C$, oxygen pressure $Po_2$ should be kept below $1.5{\times}10^{-11}torr$ to avoid oxidation of residual Ni. 3. NiSi to $NiSi_2$ transformation temperature in our study was $700^{\circ}C$ from the four-point probe measurement.

• Journal of Plant Biology
• /
• v.37 no.2
• /
• pp.203-221
• /
• 1994

Pollen grains of 19 taxa belonging to 12 genera in 5.families of the Korean gymnosperms were investigated by LM, SEM and TEM, and their morphological characters were described and palynological keys were made for each family. From the taxonomic viewpoint, palynological characters are very available to intergeneric and intrageneric classifications since their distinctive differences in pollen shape, size, condition of surface, sculpture pattern and presence of air bladders and projection except for the intrageneric classification of the genus Pinus since the overlapped characters such as pollen size and sculpture pattern. Pollen grains of Picea koraiensis in the family Pinaceae are distinguished from thc genera Pinus and Abies for the reasons that shape of air bladders are irregular, air bladders are bigger than pollen body, and pollen wall is thin. Compared with the genera Abies and Pinus that have air bladders, Picea koraiensis is closely related to Abies in that pollen body wall become gradually thin from pole of proximal face to air bladder, surface of pollen body is not rough, and pollen size is similar to that of the genus Abies. The presence of ektexine and enexine in proximal face, and the connections of the former to air bladder wall and the latter to distal face were elucidated by the investigation of pollen grains with air bladders through TEM. Endexine of the families of Taxaceae, Taxodiaceae and Cupressaceae was also obse-rved as a pile of laminae. From the observation by SEM, sculpture pattern of air bladder was foveolate with fine pits on surface. Sculpture pattern of air bladder is reticulate under LM, but observed by TEM, it resulted from the transmission of netted structure in air bladder.