• Journal of Welding and Joining
• /
• v.30 no.1
• /
• pp.64-71
• /
• 2012

The characteristics of high heat input (342kJ/cm) EG (Electro Gas Arc) welded joint of EH36-TM steel has been investigated. The weld metal microstructure consisted of fine acicular ferrite (AF), a little volume of polygonal ferrite (PF) and grain boundary ferrite (GBF). Charpy impact test results of the weld metal and heat affected zone (HAZ) met the requirement of classification rule (Min. 34J at $-20^{\circ}C$). In order to evaluate the relationship between the impact toughness property and the grain size of HAZ, the austenite grain size of HAZ was measured. The prior austenite grain size in Fusion line (F.L+0.1 mm) was about $350{\mu}m$. The grain size in F.L+1.5 mm was measured to be less than $30{\mu}m$ and this region was identified as being included in FGHAZ(Fine Grain HAZ). It is seen that as the austenite grain size decreases, the size of GBF, FSP (Ferrite Side Plate) become smaller and the impact toughness of HAZ increases. Therefore, the CGHAZ was considered to be area up to 1.3mm away from the fusion line. Results of TEM replica analysis for a welded joint implied that very small size ($0.8\sim1.2{\mu}m$) oxygen inclusions played a role of forming fine acicular ferrite in the weld metal. A large amount of (Ti, Mn, Al)xOy oxygen inclusions dispersed, and oxides density was measured to be 4,600-5,300 (ea/mm2). During the welding thermal cycle, the area near a fusion line was reheated to temperature exceeding $1400^{\circ}C$. However, the nitrides and carbides were not completely dissolved near the fusion line because of rapid heating and cooling rate. Instead, they might grow during the cooling process. TiC precipitates of about 50 ~ 100nm size dispersed near the fusion line.

• Journal of Life Science
• /
• v.22 no.2
• /
• pp.259-265
• /
• 2012

A bacterial strain, CK214, exhibiting high motility on an LB agar (1.5%, w/v) surface was isolated from the environment. The formation of unusual agar shrinking around colonies on agar plates was observed. The strain grew on minimal media containing pure agar as a sole carbon source. The cell-free culture supernatant of CK214 generated a reduced form of sugar in the in vitro reaction with the use of pure agar as a substrate, suggesting the secretion of an agar-degrading enzyme. The CK214 strain showed swarming motility on the solid media containing a wide range of concentrations of agar (0.5, 1.0, 1.5, 2.0% w/v). Various tests, including Gram staining, API analysis, and phylogenetic analysis based on 16S rDNA sequences identified that the CK214 strain was a G(+) rod-shaped bacterium grouped in genus Paenibacillus. Electron microscopic analysis demonstrated that the P. CK214 strain is peritrichously flagellated. Through transposon random mutagenesis, several agar-degrading activity defective mutants (ADMs) were generated. These mutants will be used in the future experimentation for the study of the correlation between agar-degrading activity and motility.

• Journal of Animal Science and Technology
• /
• v.62 no.5
• /
• pp.668-681
• /
• 2020

The purpose of this study was aimed to isolate a Salmonella Typhimurium-specific phage (KFS-ST) from washing water in a poultry processing facility and to investigate the feasibility of the KFS-ST as a novel bio-receptor for the magnetoelastic (ME) biosensor method. KFS-ST against S. Typhimurium was isolated, propagated, and purified using a CsCl-gradient ultracentrifugation. Morphological characteristics of KFS-ST were analyzed using transmission electron microscopy (TEM). Its specificity and efficiency of plating analysis were conducted against 39 foodborne pathogens. The temperature and pH stabilities of KFS-ST were investigated by the exposure of the phage to various temperatures (-70℃-70℃) and pHs (1-12) for 1 h. A one-step growth curve analysis was performed to determine the eclipse time, latent time and burst size of phage. The storage stability of KFS-ST was studied by exposing KFS-ST to various storage temperatures (-70℃, -20℃, 4℃, and 22℃) for 12 weeks. KFS-ST was isolated and purified with a high concentration of (11.47 ± 0.25) Log PFU/mL. It had an icosahedral head (56.91 ± 2.90 nm) and a non-contractile tail (225.49 ± 2.67 nm), which was classified into the family of Siphoviridae in the order of Caudovirales. KFS-ST exhibited an excellent specificity against only S. Typhimurium and S. Enteritidis, which are considered two of the most problematic Salmonella strains in the meat and poultry. However, KFS-ST did not exhibit any specificity against six other Salmonella and 27 non-Salmonella strains. KFS-ST was stable at temperature of 4℃ to 50℃ and at pH of 4 to 12. The eclipse time, latent time, and burst size of KFS-ST were determined to be 10 min, 25 min and 26 PFU/ infected cell, respectively. KFS-ST was relatively stable during the 12-week storage period at all tested temperatures. Therefore, this study demonstrated the feasibility of KFS-ST as a novel bio-receptor for the detection of S. Typhimurium and S. Enteritidis in meat and poultry products using the ME biosensor method.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.272-279
• /
• 2015

$Y_2O_3:Eu^{3+}$ is an excellent red-emitting phosphor, which has been widely used for display devices due to highly luminescent property and chemical stability. In this study, $Y_2O_3:Eu^{3+}$ red phosphors were prepared using the solid state reaction and RF thermal plasma synthesis. The particle size of $Y_2O_3:Eu^{3+}$ phosphors obtained by the solid state reaction varied from 10 to $20{\mu}m$, and 30~100 nanometer sized $Y_2O_3:Eu^{3+}$ particles were obtained from a liquid form of raw material through RF thermal plasma synthesis without an additional heat treatment. Photoluminescence measurements of the obtained $Y_2O_3:Eu^{3+}$ particles showed a red emission peak at 611 nm ($^5D_0{\rightarrow}^7F_2$). PL intensity of red nano phosphors prepared by RF thermal plasma synthesis was comparable to that of red phosphors prepared by the solid state reaction, indicating that nano-sized $Y_2O_3:Eu^{3+}$ red phosphors could be successfully synthesized using one-step process of RF thermal plasma.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.393-399
• /
• 2016

We have successfully fabricated 3D (3-dimensional) nanostructures of $TiO_2$ coated with a $g-C_3N_4$ layer via hydrothermal and sintering methods to enhance photoelectrochemical (PEC) performance. Due to the coupling of $TiO_2$ and $g-C_3N_4$, the nanostructures exhibited good performance as the higher conduction band of $g-C_3N_4$, which can be combined with $TiO_2$. To fabricate 3D nanostructures of $g-C_3N_4/TiO_2$, $TiO_2$ was first grown as a double layer structure on FTO (Fluorine-doped tin oxide) substrate at $150^{\circ}C$ for 3 h. After this, the $g-C_3N_4$ layer was coated on the $TiO_2$ film at $520^{\circ}C$ for 4 h. As-prepared samples were varied according to loading of melamine powder, with values of loading of 0.25 g, 0.5 g, 0.75 g, and 1 g. From SEM and TEM analysis, it was possible to clearly observe the 3D sample morphologies. From the PEC measurement, 0.5 g of $g-C_3N_4/TiO_2$ film was found to exhibit the highest current density of $0.12mA/cm^2$, along with a long-term stability of 5 h. Compared to the pristine $TiO_2$, and to the 0.25 g, 0.75 g, and 1 g $g-C_3N_4/TiO_2$ films, the 0.5 g of $g-C_3N_4/TiO_2$ sample was coated with a thin $g-C_3N_4$ layer that caused separation of the electrons and the holes; this led to a decreasing recombination. This unique structure can be used in photoelectrochemical applications.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.113-123
• /
• 2016

This study was to investigate the antifungal activity of A. holophylla essential oil against dermatophytes, such as Epidermophyton floccosum, Trichophyton mentagrophytes and Trichophyton rubrum, and to determine the potential effective compound as dermatitis treatment. To evaluate the potential antifungal activities of A. holophylla essential oil and its fractions, paper disc diffusion and agar dilution method tested with morphological observation. Also, their major constituents were analyzed by GC/MS. To determine synergic effects of active ingredient from A. holophylla essential oil were carried out by checkerboard microtiter plate testing. The morphological changes of the dermatophytes exposed to active fraction G4 were observed by electron microscopes. As the results, the highest activities were identified in the fraction containing ${\alpha}$-bisabolol. A mixture of ${\alpha}$-bisabolol and bornyl acetate showed the synergy effects, expressing high potential effects. Also, morphological observation using electron microscopes showed a dramatic changes of cell membrane of E. floccosum and T. rubrum exposed to fraction G4 containing ${\alpha}$-bisabolol. In conclusion, A. holophylla essential oil and its constituents were expected to be used as antifungal agent or raw material for dermatitis therapy.

• Journal of Life Science
• /
• v.13 no.1
• /
• pp.110-117
• /
• 2003

A thermotolerant yeast strain, Saccharomyces cerevisiae KNU5377 (abbreviated as KNU5377, was exposed to inorganic acids including sulfuric, nitric and hydrochloric acid. As a stressor, each inorganic acid is very easily dissociated in water, resulting in lowering environmental pH. When compared with a reference S. cerevisiae ATCC24858, KNU5377 could overcome such a severe condition containing a final 0.4% concentration of sulfuric acid or nitric acid to grow at the overnight culture, but this reference could not. Additionally, this strain showed a surprisingly strong tolerance by surviving despite of exposure to the regime of 0.35% of hydrochloric acid for over 90 min and also to 0.6% of sulfuric acid for 30 min. On the contrary, both strains could not survive against a final 0.45% concentration of nitric acid. This strain KNU5377 could produce ethanol of 3% in 2 days by using the fermentation medium containing a final 0.3% concentration of sulfuric arid. Moreover, change into a final 0.2% concentration of sulfuric acid caused this strain to enhance fermentation productivity up to about 4.5% even at $40^{\circ}C$. In exposure to a final 0.2% of sulfuric acid for 60 min, trehalose was most accumulated within 30 min in KNU5377, and this suggested a cellular defense system led by this disaccharide was profitable for this strain to lead to no morphological changes.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.3
• /
• pp.255-260
• /
• 1996

This study was conducted to investigate the characteristics of aboveground plants and red ginseng of polystem ginseng in 6 years of age having two or more stems in a plant. Total leaf weight and area of polystem ginseng were larger, while its stem diameter, and the leaf weight and area of the big­gest stem in each plant were decreased with increase the stem numbers in a plant. The ratio of shoot weight to root weight in the polystem ginseng with three or more stems was higher than that in the monos­tem ginseng and the polystem ginseng with two stems, In ginseng plants with no more than 2 stems, there were positive correlations between root weight and total leaf weight, and leaf area, but not between leaf weight and area of the biggest stem. Inner cavity and inner white, limiting factors for redginseng quality grade, occurred more in tri-stem ginseng than mono- and di-stem one. Percentages of Heaven (1st grade) and Earth (2nd grade) red ginseng in tri-stem ginseng were decreased compared with mono stem and di-stem ginseng.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.4
• /
• pp.167-172
• /
• 2013

Titanium dioxides nanoparticles coated aluminum oxide powders were fabricated by pulsed laser deposition (PLD) with Nd : YAG laser at 266 nm. The Pulse laser energy is 100 mJ/pulse. During the irradiation of the focused laser on the $TiO_2$ target, Ar gas is supplied into the chamber. The gas pressure is varied in a range of $1{\times}10^{-2}$ to 100 Pa. Titanium dioxides nanoparticles deposited aluminum oxide powders were characterized by using energy dispersive X-ray spectroscopy (EDX), high resolution transmission electron microscopy (HR-TEM), in order to understand the effect of Ar background gas on surface morphology and properties of the powders. The coated $TiO_2$ nanoparticles had nanosized spherical shape and the crystallite sizes of 10~30 nm. The morphology of coated $TiO_2$ nanoparticles is not affected by gas pressure. However, the particle size and crystallinity slightly increased with the increase of gas pressure. According to this technique, the size and crystallinity of nanoparticles can be easily controlled by controlling pressure during the laser irradiation.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.1
• /
• pp.1-16
• /
• 2004

The use of artificial nerve conduit containing viable Schwann cells is one of the most promising strategies to repair the peripheral nerve injury. To fabricate an effective nerve conduit whose microstructure and internal environment are more favorable in the nerve regeneration than existing ones, a new three-dimensional Schwann cell culture technique using $Matrigel^{(R)}$. and dorsal root ganglion (DRG) was developed. Nerve conduit of three-dimensionally arranged Schwann cells was fabricated using direct seeding of freshly harvested DRG into a $Matrigel^{(R)}$ filled silicone tube (I.D. 1.98 mm, 14 mm length) and in vitro rafting culture for 2 weeks. The nerve regeneration efficacy of three-dimensionally cultured Schwann cell conduit (3D conduit group, n=6) was assessed using SD rat sciatic nerve defect of 10 mm, and compared with that of silicone conduit filled with $Matrigel^{(R)}$ and Schwann cells prepared from the conventional plain culture method (2D conduit group, n=6). After 12 weeks, sciatic function was evaluated with sciatic function index (SFI) and gait analysis, and histomorphology of nerve conduit and the innervated tissues of sciatic nerve were examined using image analyzer and electromicroscopic methods. The SFI and ankle stance angle (ASA) in the functional evaluation were $-60.1{\pm}13.9$, $37.9^{\circ}{\pm}5.4^{\circ}$ in 3D conduit group (n=5) and $-87.0{\pm}12.9$, $32.2^{\circ}{\pm}4.8^{\circ}$ in 2D conduit group (n=4), respectively. And the myelinated axon was $44.91%{\pm}0.13%$ in 3D conduit group and $13.05%{\pm}1.95%$ in 2D conduit group to the sham group. In the TEM study, 3D conduit group showed more abundant myelinated nerve fibers with well organized and thickened extracellular collagen than 2D conduit group, and gastrocnemius muscle and biceps femoris tendon in 3D conduit group were less atrophied and showed decreased fibrosis with less fatty infiltration than 2D conduit group. In conclusion, new three-dimensional Schwann cell culture technique was established, and nerve conduit fabricated using this technique showed much improved nerve regeneration capacity than the silicone tube filled with $Matrigel^{(R)}$ and Schwann cells prepared from the conventional plain culture method.