• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.4080-4092
• /
• 2021

In this study, the performance of sequence tracking methods for multiple interaction events in specific CdZnTe Compton imagers was evaluated using Monte Carlo simulations. The Compton imager consisted of a 6 × 6 array of virtual Frisch-grid CZT crystals, where the dimensions of each crystal were 5 × 5 × 12 mm³. The sequence tracking methods for another Compton imager that consists of two identical CZT crystals arrays were also evaluated. When 662 keV radiation was incident on the detectors, the percentages of the correct sequences determined by the simple comparison and deterministic methods for two sequential interactions were identical (~80%), while those evaluated using the minimum squared difference method (55-59%) and Three Compton method (45-55%) for three sequential interactions, differed from each other. The reconstructed images of a 662 keV point source detected using single and double arrays were evaluated based on their angular resolution and signal-to-noise ratio, and the results showed that the double arrays outperformed single arrays.

• Current Optics and Photonics
• /
• v.4 no.6
• /
• pp.551-557
• /
• 2020

A mirror-in-slab waveguide is fabricated on a slab waveguide by using the refractive-index contrast between two materials, with the reflection performance depending on the slab waveguide's design. In this research, a slab waveguide design consisting of silicon (Si) as the core and SiO2 as the substrate was designed and developed to determine the coupling, waveguide, and mirror losses. Based on experimental results, coupling loss is dominant and is affected by the design of the slab waveguide. Furthermore, the mirror loss is affected by the design of the mirror, such as the curvature radius and the size of the mirror. TE and TM polarizations of light are used in the measurements. The experimental results show that mirror losses due to reflection by mirrors are 0.011 dB/mirror and 0.007 dB/mirror for TE and TM polarizations respectively. A simulation was performed to confirm whether the size of mirror is sufficient to reflect the input light, and to check the quality of the surfaces of fabricated mirrors.

• Journal of Acupuncture Research
• /
• v.32 no.3
• /
• pp.53-60
• /
• 2015

Purpose : This study aimed to prove that surface electromyography(SEMG) can be used to identify the degree of symptoms of diseases in the upper extremities; it also aimed to confirm various potential therapeutic effects through an inquiry into the value measured by the SEMG on certain acupuncture points in the upper extremities. Methods : Fifty healthy people received instructions for the method of exercise: wrist flexion, extension and hand grasping. Disposable electrodes were attached to acupuncture points of Susamni($LI_{10}$), Naegwan($PC_6$), Oegwan($TE_5$) and below Sohae($HT_3$) two cun on both sides in flexion, extension and grasping to measure the SEMG values. The research results were analyzed using SPSS statistics Ver. 22.0(IBM, USA). Results : The average value was highest on Naegwan($PC_6$) in grasping, and the average SEMG value was higher in the order of grasping, extension and flexion. The asymmetry index of each point was Susamni($LI_{10}$) $16.26{\pm}13.59%$, Oegwan($TE_5$) $20.38{\pm}15.59%$, below Sohae($HT_3$) two cun $20.89{\pm}16.77%$, Naegwan($PC_6$) $22.49{\pm}14.91%$ in wrist extension, Susamni($LI_{10}$) $25.99{\pm}21.44%$, Oegwan($TE_5$) $21.15{\pm}15.94%$, below Sohae($HT_3$) two cun $19.62{\pm}15.46%$, Naegwan($PC_6$) $19.93{\pm}16.85%$ in wrist flexion, Susamni($LI_{10}$) $16.60{\pm}12.21%$, Oegwan($TE_5$) $10.94{\pm}8.29%$, below Sohae($HT_3$) two cun $15.20{\pm}12.60%$, Naegwan($PC_6$) $11.68{\pm}7.77%$ in grasping. Conclusions : In this study, to identify the degree of symptoms of diseases in the upper extremities and confirm therapeutic effects, it is necessary to analyze the calculated percentage and compare the SEMG measurement of special points with those of other points, and with the asymmetry index.

• Archives of Plastic Surgery
• /
• v.49 no.6
• /
• pp.716-723
• /
• 2022

Background In March 2021, the United States Food and Drug Administration (FDA) safety communication cautioned against the use of acellular dermal matrix (ADM) products in breast reconstruction and reiterated that the FDA does not approve ADM use in breast surgery. This study aims to assess the safety of ADM use in breast reconstruction. Methods Women who underwent ADM and non-ADM assisted tissue expander (TE)-based breast reconstruction were identified using the National Surgical Quality Improvement Program database (2012-2019). Trends of ADM use over time, and 30-day outcomes of surgical site infection (SSI), dehiscence, and unplanned reoperation were assessed. Results Of the 49,049 TE-based breast reconstructive cases, 42.4% were ADM assisted and 57.6% non-ADM assisted. From 2012 to 2019, the use of ADM increased from 26.1 to 55.6% (relative risk [RR] =1.10; p < 0.01). Higher rates of SSI (3.9 vs. 3.4%; p = 0.003) and reoperation (7.4 vs. 6.0%; p < 0.001) were seen in the ADM cohort. There was no significant difference seen in dehiscence rates (0.7 vs. 0.7%; p = 0.73). The most common reoperation within 30 days for the ADM group (17.6%) was removal of TE without insertion of implant (current procedural terminology: 11,971). ADM-assisted breast reconstruction was associated with increased relative risk of SSI by 10% (RR = 1.10, confidence interval [CI]: 1.01-1.21; p = 0.03) and reoperation by 15% (RR = 1.15, CI: 1.08-1.23; p < 0.001). Conclusions ADM-assisted breast reconstruction more than doubled from 2012 to 2019. There are statistically higher complication rates of SSI (0.5%) and reoperation (1.4%) with ADM use in TE-based breast reconstruction, suggesting that reconstruction without ADM is safe when comparing immediate postoperative outcomes.

• Korean Journal of Acupuncture
• /
• v.24 no.2
• /
• pp.113-127
• /
• 2007

Objectives : To inform the 5th WHO Informal Consultation meeting on Development of International Standard Acupuncture Point Locations, held in Osaka, Japan, on September $27{\sim}29$, 2005. Results and Conclusions : Nine experts from Korea, China and Japan discussed the principles of acupuncture points locations and the point locations of 33 controversial acupoints that were not agreed at the previous meeting, as well as 328 non-controversial points that all 3 nations agreed on the locations to confirm the expression of every single point. Through this meeting, the locations of ST30, SP12, LR7 and expressions of LU6, LI8, LI9, LI10, LI 13, SP13, BL60, KI3, GB38, LR11, LR12 were agreed. Furthermore, locations of BL39, GB27, GB28 were confirmed out of 6 non-discussed points. However, several points were still required to held additional meeting to discuss. That includes LI19, LI20, ST36, ST37, ST38, ST39, SI6, KI9, PC8, PC9, TE9, TE17, TE23, GB7, GB30, GV26. In addition, foundation for the international society for the acupuncture point location was proposed to make a regular revision of standard acupuncture point location.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.2
• /
• pp.263-269
• /
• 2011

In this study, the compositions for the microwave dielectric materials were investigated to obtain the improved dielectric properties, the high temperature stability, and the sintering temperature of less than $900^{\circ}C$, which was necessary for cofiring with the internal conductor of silver. In addition, the dielectric sheets were prepared by the tape casting technique, after which the sheets were laminated and sintered. In this process, the optimum ratio of powder and binder, laminating pressure, temperature, and possibility for cofiring with the internal conductor were studied. Finally, multilayer chip treplexer filter for the 800-2,000 MHz range were fabricated, and the frequency characteristics of the triplexer filter were investigated. When the $0.6TiTe_3O_8-0.4MgTiO_3+3wt%SnO+7wt%H_3BO_3$ ceramics were sintered at $820^{\circ}C$ for 0.3 hours, the microwave dielectric properties of the dielectric constant of 29.91, quality factor of 33,000 GHz, and temperature coefficient of resonant frequency of -2.76 ppm/$^{\circ}C$ were obtained. Using the Advanced Design System (ADS) and High Frequency Structure Simulator (HFSS), the multilayer chip triplexer filter acting at the range of 800-2,000 MHz were simulated and manufactured. The manufactured triplexer filter had the excellent frequency properties in the CDAM800, GPS and PCS frequency regions, respectively.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.6
• /
• pp.1635-1642
• /
• 2004

The aim of this study was to find out the effectiveness on germinated Rhynchosia Volubilis for Female Bone Morphogenesis. For this purpose, experiments using germinated Rhynchosia Volubilis(GRV) according to germinating days were conducted to measure the polyphosphate contents and to examine the effects of the transcription activity of gene related to bone morphogenesis on the formation of bone in female. The quantitative analysis of the polyphosphate contents showed that 1 day geminated Rhynchosia Volubilis(GRV) group is treble better contents of polyphosphate than non-germinated Rhynchosia Volubilis, 2 day and 3 day GRV groups. The active of the COL1, OTN, MGP, BMP genes was less than the increase of the polyphosphate contents.

• Integrative Medicine Research
• /
• v.6 no.3
• /
• pp.254-259
• /
• 2017

Background: Those classified as Tae-Eum (TE)-type people in Sasang constitutional medicine (SCM) are prone to obesity. Although extensive clinical observations have confirmed this tendency, the underlying physiological mechanisms are unknown. Here, we propose a novel hypothesis using integrative physiology to explain this phenomenon. Methods: Hypoactive lung function in the TE type indicates that respiration is attenuated at the cellular level - specifically, mitochondrial oxygen consumption. Because a functional reduction in cellular energy metabolism is suggestive of intrinsic hypoactivity in the consumption (or production) of metabolic energy, we reasoned that this tendency can readily cause weight gain via an increase in anabolism. Thus, this relationship can be derived from the graph of cellular metabolic power plotted against body weight. We analyzed the clinical data of 548 individuals to test this hypothesis. Results: The statistical analysis revealed that the cellular metabolic rate was lower in TEtype individuals and that their percentage of obesity (body mass index >25) was significantly higher compared to other constitutional groups. Conclusion: Lower cellular metabolic power can be an explanation for the obesity trend in TE type people.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.3
• /
• pp.482-490
• /
• 2017

This study was carried out to analyze the pasting and antioxidant characteristics of cooked mixed grains consisting of germinated millet and rice with varying addition rates and cooking methods. In this study, we chose two foxtail millets: glutinous ('Samdachal') and non-glutinous ('Samdame'), along with a glutinous proso millet ('Ibaekchal'). Cooked mixed grain rice-added germinated millet was cooked by general and high pressure cooking methods, with and without fermented alcohol. The peak and trough viscosity of germinated millet were decreased significantly with increasing amounts of germinated millet. The phenolic compounds and radical scavenging activity of cooked rice-added germinated millet increased significantly with the addition of germinated millet (p<0.05). The total polyphenol contents of cooked rice-added germinated Samdachal, Samdame, and Ibaekchal were 127.74~194.11, 128.20~192.56, and $128.88{\sim}171.28{\mu}g\;GAE/g$, respectively. The total flavonoid contents were 13.79~30.23, 14.77~25.99, and $15.28{\sim}29.56{\mu}g\;CE/g$, respectively. DPPH and ABTS radical scavenging activities were 3.31~5.73 and 6.31~9.69 mg TE/100 g for cooked rice-added germinated Samdachal; 3.14~8.58 and 6.05~10.19 mg TE/100 g for Samdame; and 3.37~7.45 and 6.27~9.27 mg TE/100 g for Ibaekchal, respectively. In this study, phenolic compounds and radical scavenging activity of cooked mixed grain rice-added germinated millet with different addition rates and cooking methods can be used as basic data for manufacturing processed products.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.7
• /
• pp.557-564
• /
• 1998

A low loss x-cut $LiNbO_3$optical waveguide was fabricated by Yi in-diffusion, and the properties of guided-mode and the total insertion loss of the pigtailed waveguide with polarization maintaining fiber(PMF) were measured at optical wavelength 1550nm. for forming the waveguides, the parameters of diffusion, Ti thickness, waveguide line-width, length, diffusion temperature, time and atmosphere were set $1400{\AA}$, $8{\mu}m$, 3.3cm, $1050^{\circ}C$, 8 hours and wet bubbled oxygen, respectively. And then after the polishing and piatailing, it showed that the total insertion loss was -4.1dB for TM mode, -5.5dB for TE mode, and mode size, that is, the horizontal/ vertical size were $13.8{\mu}m/18{\mu}m$ for TM mode, $9.6{\mu}m/6.5{\mu}m$ for TE mode.