• The Korean Journal of Physiology
• /
• v.14 no.1
• /
• pp.7-13
• /
• 1980

In the previous experiment, authors have shown that during the latter half of estrous cycle there was an increase in plasma testosterone level in the rats stimulated with hCG. To determine the physiologic significance of elevated plasma testosterone, changes of the plasma concentrations of TeBG and testosterone following hCG stimulation were analyzed in the rats having a regular 5 day cycle. The rats were divided into three groups; the control, the rats stimulated with single hCG on the day of proestrus and stimulated with hCG throughout the entire cycle. Blood samples were obtained once a day for an estrous cycle and analyzed for the binding capacity of TeBG using ammonium sulphate precipitation method and testosterone concentration by means of radioimmunoassay. Followings were the results; 1) There was no significant variation in the binding capacity of TeBG in peripheral blood during the estrous cycle of the control rats. 2) No cyclic variation in the binding capacity of TeBG was observed in the rats stimulated with single hCG on proestrus. although the levels tended to be higher in the rats with stimulation than in the control rats. 3) Continual stimulation of hCG produced a marked increase in the binding capacity of TeBG especially on the day of metaestrus. 4) The changes in the plasma level of testosterone followed the same basic pattern seen in the TeBG binding capacity. 5) From above results, the followings were suggested. a. hCG related increase of the binding capacity of TeBG is probably secondary to a modest increase in estrogen as well. b. hCG related increase of plasma testosterone in female rats is not entirely due to excess production rather in part due to decreased metabolism induced by the rise in TeBG. c. It seems likely that most of elevated testosterone shown in the rat stimulated with hCG is bound to TeBG and only small portion is unbound form which influence cellular activity. It is rather possible that an increase in TeBG could augment estrogen activity.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1341-1342
• /
• 2006

Electrical characteristics of field-effect thin film transistors (TFTs) with p-channels of CdTe/CdHgTe core-shell nanocrystals are investigated in this paper. For the fabrication of bottom- and top-gate TFTs, CdTe/CrHgTe nanocrystals synthesized by colloidal method are first dispersed on oxidized p+ Si substrates by spin-coating, the dispersed nanoparticles are sintered at $150^{\circ}C$ to form the channels for the TFTs, and $Al_{2}O_{3}$ layers are deposited on the channels. A representative bottom-gate field-effect TFT with a bottom-gate $SiO_2$ layer exhibits a mobility of $0.21cm^2$/ Vs and an Ion/Ioff ratio of $1.5{\times}10^2$ and a representative top-gate field-effect TFT with a top-gate $Al_{2}O_{3}$ layer provides a field-effect mobility of $0.026cm^2$/ Vs and an Ion/Ioff ratio of $2.5{\times}10^2$. $Al_{2}O_{3}$ was deposited for passivation of CdTe/CdHgTe core-shell nanocrystal layer, resulting in enhanced hole mobility, Ior/Ioff ratio by 0.25, $3{\times}10^3$, respectively. The CdTe/CdHgTe nanocrystal-based TFTs with bottom- and top gate geometries are compared in this paper.

• Korean Journal of Materials Research
• /
• v.33 no.7
• /
• pp.295-301
• /
• 2023

Thermoelectric (TE) energy harvesting, which converts available thermal resources into electrical energy, is attracting significant attention, as it facilitates wireless and self-powered electronics. Recently, as demand for portable/wearable electronic devices and sensors increases, organic-inorganic TE films with polymeric matrix are being studied to realize flexible thermoelectric energy harvesters (f-TEHs). Here, we developed flexible organic-inorganic TE films with p-type Bi_0.5Sb_1.5Te₃ powder and polymeric matrices such as poly(3,4-eethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and poly (vinylidene fluoride) (PVDF). The fabricated TE films with a PEDOT:PSS matrix and 1 wt% of multi-walled carbon nanotube (MWCNT) exhibited a power factor value of 3.96 µW·m^-1·K^-2 which is about 2.8 times higher than that of PVDF-based TE film. We also fabricated f-TEHs using both types of TE films and investigated the TE output performance. The f-TEH made of PEDOT:PSS-based TE films harvested the maximum load voltage of 3.4 mV, with a load current of 17.4 µA, and output power of 15.7 nW at a temperature difference of 25 K, whereas the f-TEH with PVDF-based TE films generated values of 0.6 mV, 3.3 µA, and 0.54 nW. This study will broaden the fields of the research on methods to improve TE efficiency and the development of flexible organic-inorganic TE films and f-TEH.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.229-230
• /
• 2008

본 논문에서는 비정질-결정질간 가역적 상변화 기록 매질로 이용되고 있는 $(Ag_{5.5}In_{6.5}Sb_{59}Te_{29})$ 합금 박막의 Ag 조성 증가에 따른 원자구조와 상변화 특성간의 상관관계를 연구하였다. 실험에 사용된 AgInSbTe 조성은 5N의 금속 파우더를 용융-냉각법으로 벌크를 제작하였고 열증착 방법으로 Si (100) 및 유리(corning glass, 7059) 기판위에 200 nm 두께로 박막을 증착하였다. 비정질 박막의 결정화속도를 평가하기 위해서 658 nm의 LD가 장착된 나노-펄스 스캐너를 이용하여 power; 1~17mW, pulse duration; 10~460 ns의 범위에서 각 조성의 상변화에 따른 반사도 차이를 측정, 비교 분석하였다. 또한 각각의 박막을 $100^{\circ}C$ 에서 $300^{\circ}C$까지 $50^{\circ}C$ 간격으로 $N_2$ 분위기에서 1시간동안 열처리 한 후 XRD와 UV-Vis-NIR spectrophotometer를 사용하여 각 상의 구조분석 및 광학적 특성을 분석하였으며, 4-point probe로 면저항을 측정하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.70-70
• /
• 2009

Si 도핑한 $Ge_2Sb_2Te_5$ 박막은 비정질상에서의 열적 안정성증가, fcc에서 hex상으로의 상전이 억제, 활성화 에너지 증가 등의 특성을 보인다. 본 연구에서는 Si 도핑에 의한 $Ge_2Sb_2Te_5$ 박막의 전기적 그리고 구조적인 특성에 관한 실험을 진행하였다. 실험에 사용된 Si 도핑 $Ge_2Sb_2Te_5$ 박막은 Si 기판 위에 radio frequency power supply를 사용해 Si과 $Ge_2Sb_2Te_5$ 타겟을 co-sputtering하여 증착하였다. Si의 sputtering 파워를 달리하여 실리콘의 농도를 다르게 증착 하였고 X-ray photoelectron spectroscopy (XPS)를 사용하여 박막의 Si 농도를 측정하였다. 증착된 박막은 질소 분위기 하에서 $5\;^{\circ}C$/min으로 열처리 하여 여러 온도와 Si 농도에서의 박막의 특성을 측정하였다. 열처리 전, 후의 박막은 X-ray diffraction (XRD) 분석을 통하여 각각의 온도에서의 구조적 특성을 분석하였다. 열처리 온도에 따르는 필름의 전기적 특성 파악을 위해서 four-point probe를 이용하여 박막의 면저항을 측정하였고 그 값은 3 회 이상 측정하여 평균값을 사용하였다. Nano-pulse scanner를 사용하여 다양한 파워범위와 펄스폭 범위에서의 박막의 상변화에 따른 반사도 차이를 측정하여 각 조성에서의 비정질-결정질상 변화속도를 분석하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.833-834
• /
• 2013

• Korean Journal of Materials Research
• /
• v.5 no.4
• /
• pp.389-396
• /
• 1995

본 논문에서는 전자빔증착법에 의해 제조된 다결정 CdTe 박막의 구조적, 광학적 특성을 연구하였으며 특히 기판온도와 증착후 열처리에 따른 박막의 결정성변화를 관찰하고 그 결과를 고찰하였다. ITO와 유리위에 25~16$0^{\circ}C$의 기판온도로 증착된 CdTe 박막의 결정구조는 zinc blende 구조를 보이고 <111> 방향으로의 우선 성장방향을 나타내었다. 증착후 열처리를 함에 따라 결정립이 성장하고 정량적 CdTe로 접근하고 상온에서 band gap 이 단결정의 값인 1.5eV에 가까운 에너지로 천이하며 결정성이 향상됨을 관찰할 수 있었다. 이러한 열처리에 의한 결정성 향상은 PL과 XRD를 통하여 분석한 결과 재료내 존재하는 과잉 Te가 열처리시 증발함에 따라 격자내 응력이 감소함과 관련이 있음을 알 수 있었다.

• Journal of Powder Materials
• /
• v.20 no.5
• /
• pp.345-349
• /
• 2013

Carbon nanotube-dispersed bismuth telluride matrix (CNT/$Bi_2Te_3$) nanopowders were synthesized by chemical routes followed by a ball-milling process. The microstructures of the synthesized CNT/$Bi_2Te_3$ nanopowders showed the characteristic microstructure of CNTs dispersed among disc-shaped $Bi_2Te_3$ nanopowders with as an average size of 500 nm in-plane and a few tens of nm in thickness. The prepared nanopowders were sintered into composites with a homogeneous dispersion of CNTs in a $Bi_2Te_3$ matrix. The dimensionless figure-of-merit of the composite showed an enhanced value compared to that of pure $Bi_2Te_3$ at the room temperature due to the reduced thermal conductivity and increased electrical conductivity with the addition of CNTs.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.248-250
• /
• 1987

Transparent CdS films with low electrical restivity on glass substrates were prepared by coating a CdS slurry which contained 10 wt.% $CdCl_2$, and sintering in a nitrogen atmosphere at $600^{\circ}C$ for 2hr. All-polycrystalline CdS/CdTe solar cells were fabricated by coating CdTe slurries, which contained 1.0 or 4.5 wt.% $CdCl_2$, on the sintered CdS films and sintering at $700^{\circ}C$ for various periods of sintering. The spectral responses of the sintered CdS/CdTe solar cells were measured and compared with theoretically calculated quantum efficiency. The spectral responses of the sintered CdS/CdTe solar cells in the short-wavelength region decreases with-increasing sintering time. The poor response in this region is attributed to the existence of the Cd-S-Te solid solution in the compositional junction. The decrease in the maximum response in the long-wavelength region as the sintering exceeds certain time appears to be caused by the increase in the depth of the buried homo junction and by the increase in the series resistance. The $CdCl_2$ in the CdTe layer during sintering enchances the interdiffusion of S, Te or donor impurities across the metallurgical Junction causing the formation of deeper n-p junction in the CdTe layer.

• Journal of Sensor Science and Technology
• /
• v.19 no.5
• /
• pp.398-402
• /
• 2010

The liquid phase epitaxy(LPE) method was widely used to growth of mercury cadmium telluride(MCT) thin films. However, this method lead to Hg-vacancies in MCT thin film, because Hg has high vapor pressure at this temperature range. This is a well known defect in HgCdTe grown by LPE method. In this study, we report the development of techniques for improving the crystalline quality and controlling the composite uniformity of HgCdTe thin films using high- pressure Hg-ambient annealing method. As a result, we achieved the improvement of the composite uniformity of HgCdTe thin films. It was observed by the high angle annular dark field scanning TEM(HAADF-STEM) analysis. Moreover, new HgTe phase and a shrinking of lattice fringe were observed.