• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.10
• /
• pp.912-920
• /
• 2012

In this paper, we derived a closed-form equation of a Best Linear Unbiased Estimator (BLUE) estimator for the 3 dimensional estimation of the position of the emitter based on the Time Difference of Arrival (TDOA) technique. The BLUE derived for the case of estimating 3 dimensional position of the emitter with 4 base stations or sensors, and for this purpose, we used an approximated equation of the TDOA hyperbola equation obtained from the first order Taylor-series after setting the reference points of the position. The derived equation can be used for any kind of noises which are uncorrelated in each other in the TOA measurement noises and for a white Gaussian noise also.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1473-1476
• /
• 2007

유비쿼터스 컴퓨팅과 유비쿼터스 네트워크가 다양하게 발전되고 활용됨에 따라 유비쿼터스 환경에서 LBS(위치 기반서비스) 관련 기술의 중용성도 높아지고 있다. 이런 LBS를 위한 기존의 대표적인 옥내 측위 시스템들을 알아보고, IEEE802.11b 규격의 2.4GHz RF의 RSSI와 거리와의 관계를 기반으로 TDOA를 이용한 방법과 Extended Kalman Filter를 이용한 방법의 측위 시스템을 구현하고 실험을 통한 실측 오차를 비교 분석한다.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.2
• /
• pp.95-102
• /
• 2013

In this paper, we have studied the performance of the AOA (Angle of Arrival) in multi-antenna systems for LBS (Location Based Services) and we also analyzed the performance of the AOA in SISO (Single Input Single Output) in multipath environments and their differences. The adequacy of AOA positioning in new communication environments was determined. Currently used positioning methods in 3G communication environment has been developed based on SISO. However, the accuracy of SISO-based TOA (Time of Arrival), TDOA (Time Difference of Arrival), AOA positioning techniques degraded in multipath environments. The communication system will be changed and developed. According to enhanced positioning techniques are required. Using antenna characteristics and the phase difference between antennas of LTE-Advanced standard's key technique MIMO system AOA positioning, and SISO based AOA positioning performance were analyzed. We found that AOA technique potential for use based on Multiple antenna systems by computer simulations.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.10
• /
• pp.962-967
• /
• 2006

Indoor positioning is highlighted recently, and various kinds of indoor positioning systems are under developments. Since positioning systems have their own characteristics, proper positioning scheme should be chosen according to the required specifications. Positioning methods are classified into time-based and angle-based one. This paper presents the error analysis of time-based and angle-based location methods. Because measurements of these methods are nonlinear, linearizations are needed in both cases to estimate the user position. In the linearization, Gauss-Newton method is used in both cases. To analyze the position error, we investigate the error ellipse parameters that include eccentricity, rotation angle, and the size of ellipse. Simulation results show that the major axes of TOA and AOA method lie in different quadrants at most region of workspace, especially where the geometry is poor. When the TOA/AOA hybrid is employed, it is found that the error ellipse is reduced to the intersection of ellipses of TOA and AOA.

• 한국ITS학회:학술대회논문집
• /
• 2010.05a
• /
• pp.180-183
• /
• 2010

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.123-129
• /
• 2016

Recently indoor positioning technologies have been studied using the acoustic signal from a smart phone. Also multi-hop indoor positioning system in which the equipments measure their relative position successively has been proposed. As the total positioning error is prone to increase due to the successively accumulated positioning error for the multi-hop system, the error analysis is required for the system design. In this paper, the absolute positioning error for the multi-hop indoor positioning equipments successively installed is analyzed, and it is verified by computer simulation. According to the results, the accumulated positioning error is linearly increased as the number of the multi-hop increases.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.4 s.316
• /
• pp.1-7
• /
• 2007

When the sensor geometry is poor, the user position estimate obtained by of GN (Gauss-Newton) method is often diverged in radio navigation. In other to avoid divergence problem QCLS (Quadratic Correction Least Square) method using TDOA (Time Difference of Arrival) measurements is introduced, but the estimation error is somewhat large. This paper presents the modified QCLS method using weighted least square. Since the weighting matrix is influenced by the unknown user position, two-step approach is employed in the proposed method. The weighting matrix is estimated in the first step using least square, and then find user position is obtained using weighted least square. Simulation results show that the performance of the proposed method is superior to the conventional QCLS all over the workspace.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.319-324
• /
• 2022

If radio interference occurs or there is no navigation device, radio navigation of high-speed moving object becomes impossible. Nevertheless, if there are multiple ground stations and precise range measurement between the high-speed moving object and the ground station can be secured, it is possible to estimate the position of moving object. This paper proposes a position estimation method using high-precision TDOA measurement generated using TLM signal. In the proposed method, a common error of moving object is removed using the TDOA measurements. The measurements is generated based on TLM signal including SOQPSK PN symbol capable of precise timing synchronization. Therefore, since precise timing synchronization of the system has been performed, the timing error between ground stations has a very small value. This improved the position estimation performance by increasing the accuracy of the measured values. The proposed method is verified through software-based simulation, and the performance of estimated position satisfies the target performance.

• Journal of information and communication convergence engineering
• /
• v.8 no.2
• /
• pp.228-233
• /
• 2010

In this paper, the iteration localization algorithm that NLOS signal is iteratively removed to get the exact location in the wireless sensor network is proposed. To evaluate the performance of the proposed algorithm, TDOA location estimation method is used, and readers are located on every 150m intervals with rectangular shape in $300m{\times}300m$ searching field. In that searching field, the error distance is analyzed according to increasing the number of iteration, sub-blink and the estimated sensor node locations which are located in the iteration range. From simulation results, the error distance is diminished according to increasing the number of the sub-blink and iteration with the proposed location estimation algorithm in NLOS environment. Therefore, to get more accurate location information in wireless sensor network in NLOS environments, the proposed location estimation algorithm removing NLOS signal effects through iteration scheme is suitable.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.863-865
• /
• 2015

A method for estimating position is AOA, TOA, TDOA, Wi-Fi, Beacon etc. A method for estimating the location in indoor environment is used mainly Wi-Fi, Beacon. The reason is that AOA, TOA and TDOA are unfit to estimate position in indoor environment. To address this problem, this paper presents a AOA algorithm based on AP having a four directional antenna. The algorithm uses only the angle received from the four antennas. This can draw linear equations for signal. And calculate the intersections of the lines. Intersections means the position of user.