• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.550-552
• /
• 1997

This paper describes a detailed performance analysis of TCSC using experiment with a scaled model. A 3-phase scaled model of TCSC was built with rating of 2kVA to verify the operation. The variable reactance of TCSC with respect to the firing angle of thyristor switch analyzed theoretically and experimentally. And the limit of TCSC operation was investigated in whole range of the thyristor firing-angle. The experimental results with scaled model were compared with the simulation results for a periodic state space model using MATLAB.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.353-354
• /
• 2015

TCSC 적용시 송전선로의 송전용량 증대와 효율적인 송전계통 운영 가능하기 때문에 국외에서는 TCSC에 대한 많은 적용 사례와 연구가 진행되어 왔다. 이러한 이유로 국내에서도 송전계통의 안정성과 효율성 증대를 위한 TCSC 도입이 고려되고 있다. 본 논문에서는 리액턴스 제어, 전류 제어 또는 전력 제어, 전력동요 억제를 위한 제어 등 TCSC의 다양한 제어기를 포함하는 상세 모델을 PSCAD/EMTDC를 이용하여 모델링한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1056-1059
• /
• 1997

Thyristor-Controlled Series Compensation (TCSC) is expected to be applied in transmission systems to achieve a number of benefits. TCSC can provide such assistance for stability, as well as helping to direct flows onto desired transmission paths. This paper describess a TCSC model which can be used for typical transient and oscillatory stability studies. Also included is a discussion on relevant information to extend the modeling detail of the TCSC for use stability analysis.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권10호
• /
• pp.454-463
• /
• 2001

This paper presents a method for real-time estimation of TCSC reference quantity in order to enhance the power system transient stability energy margin using artificial neural network in multi-machine system. This paper has the three parts, the first part is to determine the lines to be installed by TCSC. The seconds is to estimate the energy margin using by ANN. To get the critical energy for training, we use the potential energy boundary surface(PEBS) method which is one of the transient energy function(TEF) method. And the last is to determine the TCSC reference quantity. In order to make training data for ANN in this step, we use genetic algorithm(GA). The proposed method is applied to 39-bus, 46-line. 10-machine model system to show its effectiveness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.652-654
• /
• 1996

A study of the coordinated control of a TCSC and an existing PSS is presented when both are used to damp the low frequency oscillations. TCSC is modeled by the first order delay model. Linear quadratic Gaussian controller is used for designing PSS and TCSC supplementary controller. The performance of the proposed controllers is simulated in a one machine infinite bus model. As a result, it is shown that to damp the low frequency oscillations efficiently, it is necessary to control TCSC and PSS simultaneously.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.661-663
• /
• 1996

The thyristor controlled series compensator can vary the impedance continuously to levels below and up to the line's natural impedance, thus enabling transmission line capability to be increased and power flow to be controlled. The dynamic performance of TCSC to increase the power system damping is mainly analyzed in this paper. The TCSC controller used here is of the PID type and the input signal to the controller is the active power flow through the TCSC. The TCSC parameters are determined so as to minimize the modal performance measure for duping of power system oscillations.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권5호
• /
• pp.226-232
• /
• 2000

This paper presents application results of the augmented matrix eigen-sensitivity theories to TCSC siting problem for damping the inter-area low frequency oscillation in the large KEPCO system. First and second-order eigen-sensitivities of the inter-area low frequency oscillation in the large KEPCO system. First and second-order eigen-sensitivities of the inter-area mode are computed fro changes in susceptance of the transmission lines. The lines having high sensitivity are chosen as the initial candidates for installing TCSC. Then for each of the chosen candidates, Bodeplot of the transfer function with line susceptance as the input and the bus voltage at one side of the line as the output is computed. Using the Bode plots, the lines having any zeros near the inter-area mode are screened out since design of TCSC controller is very difficult in such a case. The $H_{\infty}$ TCSC controller installed at any finally chosen candidate is found to be effective in damping the inter-area oscillation, and the proposed TCSC siting algorithm is proved to be valid. Design of $H_{\infty}$ controller is described in Part IIof this paper.

• 전력전자학회논문지
• /
• 제9권2호
• /
• pp.150-157
• /
• 2004

본 논문에서는 아날로그형 전력 계통 시뮬레이터에 적용하고자 개발 중인 TCSC(Thyristor Controlled Series Capacitor) 시뮬레이터 시스템 제어기의 하드웨어와 소프트웨어 구성에 대하여 제시하고자 한다. 본 연구에서 개발하고자하는 TCSC 시스템의 제어기는 기존의 전력 계통 시뮬레이터의 여러 제어기들과 통합되어 전력 시스템의 특성을 제어하는 장치이기 때문에 제어기는 전력 시스템의 각종 주요 파라메터를 실시간으로 통신할 수 있어야 하며 주어진 시간 내에 제어 기능을 수행할 수 있어야 한다. 따라서, 이러한 요구 조건을 만족시키기 위해서는 제어기 하드웨어의 설계와 구성이 매우 중요하다 본 논문에서는 TCSC 시스템의 복합적인 기능 수행을 위한 제어기 하드웨어와 소프트웨어 구조에 대하여 제시하고자 한다. TSCS 제어기는 고속 부동 소수 연산이 가능한 DSP(Digital Signal Processor) 플랫폼과 실시간 RTOS(Real Time Operating System)로 구성되어 있다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.468-471
• /
• 2000

This paper investigates the harmonics of TCSC power transmission system having nonlinear VI characteristic loads. Nonlinear VI characteristic components are modelled with Nortons harmonic current sources. The system parameters such as line impedances admittances and node voltages and the thyristor switching action are described in complex Fourier series. EMTP simulation studies with a detailed three-phase TCSC power transmission system are also performed in order to verify the harmonic analysis at the steady state.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.193-195
• /
• 2003

In this paper, we present the analysis results of TCSC(Thyritor Controlled Series Capacitor) operating characteristics with damping resisters. This TCSC system is designed for KERI simulator. It consists of many power system components, which are generator models, scale-downed transmission line modules, transformers, switches, FACTS(Flexible AC Transmission System) devices.