• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.4
• /
• pp.214-219
• /
• 2012

In this paper, the method of protective coordination is studied to install Superconducting Fault Current Limiter (SFCL) to power distribution system. If SFCL is installed, the protective coordination is not operated well because of the decreased fault current. Thus, the resetting method of protective devices is presented to coordinate protection system in power distribution system with resistor-type SFCL. The presented methods are divided into three parts; OCR, OCR-Recloser, OCR-Recloser-Recloser. The presented methods are proved through case studies using PSCAD/EMTDC simulation.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.374-375
• /
• 2018

신재생에너지의 보급 확산과 전력수요의 증가에 따라 전력계통이 분산화되는 추세이며 이에 따라 배전계통의 안정화를 위한 전력계통 안정화 장치(Power System Stabilizer)로 그 사용이 확대되고 있는 추세이다. 따라서 대표적인 전력계통 안정화 장치인 정지형 무효전력보상장치(SVC: Staic Var Compensator)에 대한 다양한 토폴로지로 개발되고 있다. 또한 기술의 트랜드는 SVC에서 Statcom 기술 개발로 이어지고 있다. 최근 Statcom의 변환손실 및 경제적 단점을 극복하기 위해 Statcom과 SVC를 병렬로 사용하는 Hybrid 방식에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 SVC 기능에서 TCC(Thyristor Controlled Capacitor)방식에서 문제가 되는 돌입전류 제한을 위한 새로운 Soft-Step Switching 방식을 제안한다. 또한 Statcom의 용량을 줄이기 위해 SVC용 무효전력 보상 리액터 및 콘덴서 군을 설계하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.638-641
• /
• 1999

In consideration of Dielectric loss and Temperature stability, 3-element system dopped with NiO, $Cr_2O_3$, well-known as Hardner and Stabilizer whose primary element is PZT was eximanated its structure, Temperature Coefficient of Capacitor, relative resistivity for Temperature Compensation condensor study. dopping with Nio, $Cr_2O_3$, Temperature Characteristic is developed, Dielectric loss largely represented useful1 small values in specimens dopped with NiO 0.2wt%, and specimence sintered at $110^{\circ}C$ dopped with $Cr_2O_3$, 0.1wt% also relative resistivity largely showed tendency of decrement According to dopping NiO more.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.10a
• /
• pp.8-11
• /
• 1988

(1-x-y)Pb($Zn_{1/3}Nb_{2/3})0_3-BaTiO_3PbTiO_3(0.05{\leq}x{\leq}0.20, 0.05{\leq}y{\leq}0.15$) ternary compound ceramics were fabricated by the mixed oxide method. The dielectric properties with temperature and frequency of the specimens were investigated. Relative dielectric constants of the specimens were increased with $BaTiO_3$ contents. Increasing the $BaTiO_3$contents, the variation in the relative dielectric constant with frequency, the temperature coefficient of capacitance (TCC) and the dielectric loss were decreased.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.6
• /
• pp.251-255
• /
• 2007

We made $(1-x)BCB-xBNT(BaNd_2Ti_4O_{12})$ (x=20, 30, 40, 50 vol%) composite thick film with a high dielectric constant and low loss by the hand casting method. Dielectric constant and dielectric loss of prepared thick film are measured at 1MHz and curing behavior of the film are observed through thermal analysis such as DSC. We investigated the effect of contents of BNT filler and curing behavior of film on dielectric properties of BCB-BNT composite. Dielectric constant increased with increasing BNT filler from 20 to 50 vol% and dielectric loss ($tan{\delta}$) decreased with increasing BNT filler. Dielectric constant and loss ($tan{\delta}$) of composite material was not nearly dependent on the curing behavior. But as a result of TCC (Temperature Characteristics of Coefficient) decreased with increasing the curing temperature, we confirmed that the curing of these composite system is most stable above $250^{\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.2
• /
• pp.102-105
• /
• 2009

The accelerated life time test of the MLCCs with different $BaTiO_3$ particle sizes were conducted at $150^{\circ}C$, 75 V condition and the effect of $BaTiO_3$ particle size on the breakdown voltage and degradation characteristics of MLCCs was investigated. The MLCCs were prepared by using the $BaTiO_3$ particles having the size of $0.525{\mu}m$, $0.555{\mu}m$, $0.580{\mu}m$ and Ni-electrode, respectively. The MLCCs which have the particle size of $0.525{\mu}m$, $0.555{\mu}m$, and $0.580{\mu}m$, respectively were confirmed to meet the standard requirements of X5R(change capacitance within ${\pm}15%$ at $-55{\sim}85^{\circ}C$) by TCC(Temperature Coefficient of Capacitance). The effect of the $BaTiO_3$ particle size on the insulation resistance behavior of MLCCs was confirmed by BDV(Breakdown Voltage) measurements and the cause and degree of degradation of MLCCs were characterized by XPS analysis after the accelerated life test. The MLCCs with $0.525{\mu}m-BaTiO_3$ showed better insulation resistance and BDV characteristics compare to other MLCCs and XPS analysis revealed that the MLCCs degradation is caused by the NiO peak and $BaTiO_3$ peak decrease.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.561-566
• /
• 2005

Polycrystalline silicon films were deposited using hot wire CVD (HWCVD). The deposition of silicon thin films was approached by the theory of charged clusters (TCC). The TCC states that thin films grow by self-assembly of charged clusters or nanoparticles that have nucleated in the gas phase during the normal thin film process. Negatively charged clusters of a few nanometer in size were captured on a transmission electron microscopy (TEM) grid and observed by TEM. The negatively charged clusters are believed to have been generated by ion-induced nucleation on negative ions, which are produced by negative surface ionization on a tungsten hot wire. The electric current on the substrate carried by the negatively charged clusters during deposition was measured to be approximately $-2{\mu}A/cm^2$. Silicon thin films were deposited at different $SiH_4$ and $H_2$ gas mixtures and filament temperatures. The crystalline volume fraction, grain size and the growth rate of the films were measured by Raman spectroscopy, X-ray diffraction and scanning electron microscopy. The deposit ion behavior of the si1icon thin films was related to properties of the charged clusters, which were in turn controlled by the process conditions. In order to verify the effect of the charged clusters on the growth behavior, three different electric biases of -200 V, 0 V and +25 V were applied to the substrate during the process, The deposition rate at an applied bias of +25 V was greater than that at 0 V and -200 V, which means that the si1icon film deposition was the result of the deposit ion of charged clusters generated in the gas phase. The working pressures had a large effect on the growth rate dependency on the bias appled to the substrate, which indicates that pressure affects the charging ratio of neutral to negatively charged clusters. These results suggest that polycrystalline silicon thin films with high crystalline volume fraction and large grain size can be produced by control1ing the behavior of the charged clusters generated in the gas phase of a normal HWCVD reactor.

• Journal of Animal Science and Technology
• /
• v.63 no.4
• /
• pp.841-853
• /
• 2021

This study aimed to investigate the effects of Kimchi cabbage by-products either treated or untreated with calcium oxide (CaO) and alkaline hydrogen peroxide (AHP) as substitutional ingredient of total mixed ration (TMR) on in vitro fermentation, in situ disappearance and growth performance of Holstein steers. Cannulated Holstein (600 ± 47 kg) was used for both the in vitro and in situ experiments. The treatments used were TMR only (CON), TMR + 30% Kimchi cabbage by-products fresh matter (FM) basis (TC), TMR + 30% Kimchi cabbage by-products FM basis + 5% CaO FM basis (TCC), and TMR + 30% Kimchi cabbage by-products FM basis + 5% CaO FM basis + 3.22% AHP FM basis (TCCA). For in vivo experiment, thirty-four Holstein steers (273 ± 45 kg) were subjected to a 150-day feeding trial, divided into two groups: CON and TC. In the in vitro experiment, pH of TCCA was greatest (p < 0.05) among other treatments at all incubation times. Ammonia nitrogen and volatile fatty acid concentrations were not significantly different for each treatment. However, butyrate was greater (p < 0.05) in TCC and CON than in both TC and TCCA. During in situ experiment, the dry matter (DM) disappearance was greatest (p < 0.05) in TCCA among other treatments. Also, disappearance of neutral detergent fiber (NDF) and acid detergent fiber (ADF) were observed greatest (p > 0.05) in TCCA treatment. In the in vivo experiment, average daily gain (ADG) did not differ between CON and TC. In blood profile analysis, alanine aminotransferase, aspartate aminotransferase, glucose, total cholesterol, high-density lipoprotein cholesterol, low-density lipoprotein cholesterol, and total protein concentration were not significantly different between treatments. But, creatinine concentration was greater (p < 0.05) in TC than in CON. Overall results suggest that Kimchi cabbage by-products either treated or untreated with CaO and AHP can be used as substitutional ingredient in TMR for Holstein steers.

• World Technopolis Review
• /
• v.2 no.2
• /
• pp.81-95
• /
• 2013

This paper seeks to build on previous work conducted by Porter, Devol, Florida, Bahrami and Evans, Wennberg and Lindqvist, and others contained in the literature, to construct a new way of looking at innovation cluster development. It seeks to describe the key elements contained in the research that serve as building blocks for innovation clustering, adding analysis dimensions that aim to further illuminate understanding of this process. It compares those building block characteristics to the innovation topography of U.S. urban centers, to shed light on a new framework through which urban innovation cluster formation can be considered. It identifies three building block analysis categories: 1) Technological Capability and Capacity (TCC); 2) Intellectual Propulsion Capacity (IPC); and 3) Structural Creative Inspiration (SCI). These three pillars form the architecture for creation of a Strategic Innovation Network (SIN), upon which clustering can be systematically analysed and built. The purpose of the SIN is to optimally organize and connect all available resources that include physical, financial, and human, such that innovation clustering is inspired, encouraged, nurtured, and ultimately constructed as fully functioning socio-economic organisms that provide both local and regional benefits. It is designed to aid both private enterprise and public policy leaders in their strategic planning considerations, and to enhance urban economic development opportunities.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.7
• /
• pp.424-427
• /
• 2015

In this study, in order to develop the capacitor composition ceramics with the good dielectric properties, $(Ba_{0.86}Ca_{0.14})(Ti_{0.85}Zr_{0.12}Sn_{0.03})O_3+xCuO$ (x= 0.006~0.010) ceramics were prepared by the conventional solid-state reaction method. The effects of CuO addition on the microstructure and dielectric properties was investigated. All specimens indicated rhombohedral phase without any secondary phase. As CuO addition increased, the variation width of TCC was increased at more than $40^{\circ}C$. Also, the specimen with x=0.007 sintered at $1,250^{\circ}C$ showed the high dielectric constant of 9,632 in spite of low temperature sintering temperature.