• Korean Journal of Construction Engineering and Management
• /
• v.23 no.4
• /
• pp.47-56
• /
• 2022

In a construction project, process planning is an important factor in determining the success or failure of a project. In particular, it is necessary to systematically establish a process plan in the early stage because the finishing work of an apartment house involves more interference than the foundation work or the frame work. First, in this study the problems of Tact process management were identified, Based on the data from the case project, conventional Tact process management and compositive Tact process management were compared and analyzed. Second, cost analysis was performed on applicable plastering work to suggest the necessity and direction of compositive Tact process management. Third, the appropriateness of manpower according to the number of construction households is analyzed through cost analysis. Through this, the validity and effectiveness of compositive Tact process management were verified based on the results derived from this study.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.554-562
• /
• 2007

This study determined tact process paths by separating the finish works according to the properties of work areas and work relations in order to apply the tact schedule management to the finish works. In addition, by suggesting preparing and sharing the workflow charts, the experiments can be shared between the executors and any possible frictions between the specialist works can be identified in advance. In addition, any errors on the plan can be reviewed and modified through the measurement stage of tact plan attainment rate. The process of tact schedule management is improved with such tools and methods and the efficiency of the process through the application of cases was verified.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.5
• /
• pp.113-124
• /
• 2012

TACT process reengineering is applied to the finish work of apartment buildings and extra tall buildings to conduct efficient process control in Korea. Non-systemized information on the performances, however, causes difficulties in building a database for such records and it takes long time to find the relevant information. In order to solve such problems, scientific and quantitative understanding on the construction information and data is required to perform TACT process reengineering satisfactorily and also proper management plan should be provided for the working level staff to understand the required information and data more easily. In this regard, this paper reorganizes the TACT process reengineering based on the general process control and classifies the items of required information to redesign. Redesigned process was verified by specialists making use of work-information matrix. As a result, paper contributed to increasing comprehension level of the working level people and when the persons in charge are transferred to other duty, it makes them understand all the working procedure faster, which enables the departments involved to carry out their cooperation and adjustment more efficiently.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.125-126
• /
• 2011

Construction projects are being more complicated in proportion to the economic development. Process management is a critical issue in the construction that decides success of a project. Especially, a TACT method which divides and manages resources to repeat each activity is more important. Although becoming an issue dealing with the delay at winter season, it is not property developed. This paper suggests 'activity priority method' and 'TACT unit method' through case study. We validate necessity and efficiency of the TACT method through simulations and a survey. We expect cost reduction by decreasing unnecessary spending.

• The Journal of Industrial Distribution & Business
• /
• v.12 no.1
• /
• pp.15-30
• /
• 2021

Purpose: Year of 2020, COVID-19 has been changing the people's everyday life to ways never been thought of before all over the world. The IT and electronic industry, the methods of supplying goods and services have been changed from contact to un-tact environments based on un-tact systems very rapidly. COVID-19 has been striking the tourism and the travel industry, especially the airline and hotel industry of which services are provided by human. For the passenger service of airliner, automation has been propelled and un-tact style of service has become mainstreams except cabin service since 2000's. For passenger transportation, due to traffic regulations and exclusions etc., switching to new ways is not easy. However, under the new environment made by COVID-19, kiosk check-in, web check-in and mobile check-in has become more important. In this study, the characteristics of airline customers using mobile goods are investigated to find ways to raise the rate of utilizing mobile check-in and to increase the efficiency of boarding process. Research design, data, and methodology: Considering the COVID-19 environment, survey was done by online research company. The research model is designed to integrate the user characteristics and usage/purchase motive and technology acceptance theory. Especially considering infectious diseases prevention, concern of safety is adopted as one of the usage motive variable. Results: Extraversion or conscientiousness characteristics prefers counter check-in(contact service), while openness characteristics prefers mobile check-in(un-tact service). Concern of safety for infectious disease shows strong non-preference on counter check-in. Conclusions: Regarding service type regardless of type of the industry, automation and un-tact have been mainstreams due to high costs of labor, efficiency and standardization issue, etc., and COVID-19 has given impetus to them. For airliner, un-tact service including boarding process service has been more and more important. To raise the rate of un-tact service use, the characteristics of the user should be analyzed first. The study results indicate that for extraversion or conscientiousness, some kinds of methods to induce them to use un-tact service more are needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1725-1728
• /
• 2009

This research developed process control device and FGV pattern generating device essential for full gate visual inspection to improve process so that defect detection capability may be maximized in specified environment. The devices developed in this research, which can be swiftly replaced in case loss or error occurs, are anticipated to improve module yield as well as maintain tact loss near '0'. In addition, as a result of mounting H/W and S/W system to control detailed operation sequence in production line and executing performance check and verification, detection rates were 98.1% and 99.1% respectively for pixel defect by tact and line defect, and yield of the entire module process including gate and visual level test increased up to 98.3%.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.1
• /
• pp.3-12
• /
• 2011

Technology based civilization has made a sustained advancement, resulting in economic growth and material prosperity. The outcome was the beginning of environmental destruction. Especially, in regard to construction, it has been recognized as a key culprit for pollution. As such, the construction industry has recently shown interest in the environment, as it has been applying environment friendly method of construction and reducing wastes. As the number of old common housing increases in our country, reconstruction and remodeling are implemented as a means of improvement. However, it can be said that remodeling is the inevitable option because of cost and environmental problems associated with reconstruction. As part of its feature, remodeling work is preceded by removal work. And, removal work inevitably creates construction wastes. Treatment of wastes that takes into consideration environmental aspects is important and for this, removal work that is based on environment friendly remodeling to ensure selective separation must be implemented. Yet, a removal work based on environment friendly remodeling has a lower level of output compared to existing methods. Because remodeling work by its nature has a post construction work which proceeds after it, securing work efficiency is important as the removal work is a critical path activity. Thus, the present study improves the work process of a removal work that is based on environment friendly remodeling so that it becomes a work process that includes work efficiency. For this, as a case study, old common housing has been selected, and a TACT process has been developed which is based on data acquired from environment friendly removal work. And, this study develops an optimal TACT process which is based on environment friendly remodeling by conducting a simulation for a 15 floor apartment.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.11a
• /
• pp.557-561
• /
• 2011

The study proposes three types of production lead time according to the production or demand pattern. First of all, it discusses the difference of three lead times. While pitch time and cycle time are used in push system with process stock and mass conveyor production, the tact time is used in pull system like as JIT based lean production system.

• Korean Journal of Construction Engineering and Management
• /
• v.4 no.4 s.16
• /
• pp.145-154
• /
• 2003

The change in environment of construction industry and the advancement of information technology require the improvement of construction project efficiency. However, construction industry still lacks performance-measuring tools that are the requirements of efficient project management system. In case of the schedule management system, schedule is usually being managed by result-oriented measurements such as completion time, spent cost, and progress rate, which are not good enough to control the overall continuity of work-flow. This research aimed to systemize the overall construction process and to develop the indicators for measuring performance of TACT activities during finishing work period that can contribute to the systemization of TACT management.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.126-134
• /
• 2003

The change in environment of construction industry and the advancement of information technology require the improvement of construction project efficiency. However, construction industry still lacks performance-measuring tools that are the requirements of efficient project management system. In case of the schedule management system, schedule is usually being managed by result-oriented measurements such as completion time, spent cost, and progress rate, which are not good enough to control the overall continuity of work-flow. This research aimed to systemize the overall construction process and to develop the indicators for measuring performance of TACT activities during finishing work period that can contribute to the systemization of TACT management.