• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.393-403
• /
• 2018

This study was conducted to evaluate the effects of a Motivation Enhancement for Smoking Cessation Program on middle school students' knowledge regarding smoking, self-efficacy, and daily amount of smoking. The study used a nonequivalent control group pre-post-test design and included 47 students who smoke from two middle schools located in city U as subjects. Subjects were separated into two groups, an experimental group with 23 students and a control group with 24 students. Data were collected from February 19, 2018 to May 11, 2018 and analyzed using the IBM SRSS/win 24.0 program to conduct a t-test, ${\chi}^2$-test, Fisher's exact test, and a paired t-test. After subjects went through the Motivation Enhancement for Smoking Cessation Program, their knowledge regarding smoking (t= 3.38, p=0.002), self-efficacy (t= -3.37, p=0.002), and their daily amount of smoking (t=3.38, p=0.002) showed significant changes. The results indicate that the Motivation Enhancement for Smoking Cessation Program is effective at increasing subjects' knowledge regarding smoking and self- efficacy while decreasing their daily amount of smoking. Therefore, to induce cessation of adolescent smoking, Motivation Enhancement for Smoking Cessation Programs tailored to each student should be held.

• Journal of Animal Science and Technology
• /
• v.44 no.3
• /
• pp.327-340
• /
• 2002

This study was conducted to investigate the effects of domestic clay minerals on feed efficiency, meat quantity, meat quality and economic traits in 24 head of Hanwoo steers(166.1kg in body weight) for 540 days from six to 24 months in age. Feeding trial was conducted with 4 treatment(six heads/treatment) which were T1(Control), T2(Control+Kaolinite), T3(Control+Bentonite), T4(Control+Illite). The results obtained are summarized as follows; The range of average daily gains were 0.682 to 0.713, 0.669 to 0.714, 0.690 to 0.840 and 0.699 to 0.756kg in growing, fattening, finishing and over-all period, respectively, and the gains were high in T1 for growing and fattening period but in clay mineral groups for finishing and over-all period, especially it was high in Illite and Bentonite groups. Concentrates and TDN intakes per unit of kg gains were lower in clay mineral groups than in control and was lower especially in Bentonite groups. In carcass characteristics, dressed carcass and fresh meat and retailed cut percent were not apparently difference by treatments, and yield index was 69.3, 68.9, 68.8 and 68.6 in T3, T2, T4 and T1, respectively. Marbling scores were 5.1, 4.6, 4.4 and 3.3 in T3, T2, T4 and T1, respectively, and the range of shear force by treatment was from 3.51 to 6.02kg/cm2. and were improved with significant difference(P<0.05) in clay mineral groups than in control. Also in palatability traits, panel test scores of juiciness, tenderness and flavor were improved in clay mineral feeding groups, especially the flavor was improved with highly significant difference(P<0.01) in clay mineral groups than in control. In total fatty acid contents, the rate of SFA(saturated fatty acid) in longissimus muscle of beef was higher in the order of T2, T3, T1 and T4 while the rate of MUFA(monounsaturated fatty acid) was high in the order of T4, T3, T1 and T2. The content of oleic acid which is major influential factor at the flavor of beef was higher in Illite groups than in any other groups. In composition of amino acids in longissimus muscles of beef, the rate of essential amino acids was high in the order of T1, T2, T3 and T4. and the rate of amino acids in clay mineral groups was smaller than in control.In chemical component in Gom-Tang(soup of bone) made by Hanwoo steer’s leg-bone, the ranges of crude protein, ether extract, and crude ash was 0.81 to 1.24, 0.17 to 0.35 and 0.07 to 0.09%, respectively. In mineral composition, the ranges of Ca, P, Na and Mg was 14.01 to 15.77, 11.45 to 16.40, 37.92 to 49.99 and 0.26 to 0.46ppm, respectively. Chemical composition were not apparently different but mineral composition was increased in clay mineral groups than in control. Income by treatments was 967,096 to 1,524,055 Won per head for 540 days and income of clay mineral groups in comparison with control’s increased by 23.7 to 57.6 percent, and especially it was higher in bentonite and(or) Illite groups than others. According to the above results it may be concluded that clay mineral to growing-fattening Hanwoo steers can be improved the meat quantity, meat quality and income. Especially the effect of bentonite and illite is large and can be recommended for usage to improve animal performance as feed additives of growing-fattening Hanwoo steers.

• Journal of the Korean Society of Radiology
• /
• v.17 no.5
• /
• pp.767-773
• /
• 2023

To In this study, we sought to evaluate related factors affecting lung volume and their significance in pulmonary function and ventilation disorders. As experimental subjects, 206 normal adult men and women who underwent a low-dose chest CT scan and a spirometry test were selected at the same time. The experimental method was to measure lung volume using lung CT images obtained through a low-dose chest CT scan using deep learning-based AVIEW. Measurements were made using the LCS automatic diagnosis program. In addition, the results of measuring lung function were obtained using a spirometer, and gender and BMI were selected as related factors that affect lung volume, and significance was evaluated through an independent sample T-test with lung volume. As a result of the experiment, it was confirmed that in evaluating lung volume according to gender, all lung volumes of men were larger than all lung volumes of women. he result of an independent samples T-test using the respective average values for gender and lung volume showed that all lung volumes were larger in men than in women, which was significant (p<0.001). And in the evaluation of lung volume according to BMI index, it was confirmed that all lung volumes of adults with a BMI index of 24 or higher were larger than all lung volumes of adults with a BMI index of less than 24. However, the independent samples T-test using the respective average values for BMI index and lung volume did not show a significant result that all lung volumes were larger in BMI index 24 or higher than in BMI index less than 24 (p<0.055). In the evaluation of lung volume according to the presence or absence of pulmonary ventilation impairment, it was confirmed that all lung volumes of adults with normal pulmonary function ventilation were larger than all lung volumes of adults with pulmonary ventilation impairment. And as a result of the independent sample T-test using the respective average values for the presence or absence of pulmonary ventilation disorder and lung volume, the result was significant that all lung volumes were larger in adults with normal pulmonary function ventilation than in adults with pulmonary function ventilation disorder (p <0.001). Lung volume and spirometry test results are the most important indicators in evaluating lung health, and using these two indicators together to evaluate lung function is the most accurate evaluation method. Therefore, it is expected that this study will be used as basic data by presenting the average lung volume for adults with normal ventilation and adults with impaired lung function and ventilation in similar future studies on lung volume and vital capacity testing.

• Journal of Animal Science and Technology
• /
• v.53 no.5
• /
• pp.441-450
• /
• 2011

This study was conducted to determine the effects of partial replacement of corn grain and soybean meal with agricultural by-product feeds on in vitro rumen fermentation characteristics and optimum levels of mixing ratio. The agricultural by-products to examine the effectiveness of the partial replacement of concentrate were wheat bran, corn gluten feed, bakery waste, soybean curd, rice bran, green kernel rice, soybean hull, distillers' grain, and mushroom substrate. In the first experiment, in vitro ruminal fermentation characteristics of feedstuffs were evaluated at 0, 3, 6, 12, 24, and 48 hours after incubation. In the second experiment, fermentation characteristics were investigated with green kernel rice and soybean curd which replaced corn grain or soybean meal. Feed were formulated with 40% corn grain + 20% soybean meal (T1), 40% corn grain + 17.5% soybean meal + 2.5% soybean curd (T2), 25% corn grain + 20% soybean meal + 15% green kernel rice (T3), and 30% corn grain + 15% soybean meal + 6% green kernel rice + 9% soybean curd (T4), respectively, with forage source of 10% alfalfa hay, 20% timothy hay, and 10% corn silage as fed-basis. In 24 and 48 hour cultivations, T4 showed significantly lower pH compared to T1, whereas in 3 and 24 hour cultivations, T4 showed significantly higher DM degradation compared to T1. In addition, the gas production of T3 was also higher than T1 (p<0.05). Overall results of the present experiments indicated that green kernel rice and soybean curd as agricultural by-products have the possibility of partial replacements of corn grain and soybean meal.

• The Journal of Society for e-Business Studies
• /
• v.24 no.2
• /
• pp.113-124
• /
• 2019

Today many companies are offering IoT-enabled products and place emphasis on security from the planning stage to protect their products and user information from external threats. The present security levels, however, remain low because the time and resources invested in developing security requirements for each device are far from enough to meet the needs of a wide range of IoT products. Nevertheless, vulnerabilities of IoT devices have been reported continuously, which calls for more detailed security requirements for home IoT devices. In this context, this research identified threats of home IoT systems by using Microsoft Threat Modeling Tool. It then suggested measures to enhance the security of home IoT devices by developing security assessment items through comparative analysis of the identified threats, domestic and global vulnerability assessment standards and related research. It also verified the effectiveness of the developed security requirements by testing them against the existing ones, and the results revealed the security requirements developed in this research proved to be more effective in identifying vulnerabilities.

• Journal of The Geomorphological Association of Korea
• /
• v.26 no.4
• /
• pp.81-96
• /
• 2019

The Yeongdeok 53m marine terrace (Y₅₃mT), Y₄₃mT, Y₃₃mT, Y₂₄mT, Y₁₉mT and Y₁₁mT distributed along the Yeongdeok coast, southeastern Korean Peninsula are well compared with the thalassostatic terraces of the high terrace 1 (ℓHT₁ ; 51m of the relative heights from the river floor), high terrace 2 (ℓHT₂ ; 43m), middle terrace 1 (ℓMT₁ ; 32m), middle terrace 2 (ℓMT₂ ; 25m), lower terrace 1 (ℓLT₁ ; 18m) and lower terrace 2 (ℓLT₂ ; 10m) respectively, developed along the lower reaches of the Chucksan-cheon and Obo-cheon rivers, judging from the comparison of paleosols (red soils) between the above marine and thalassostatic terraces. Using the Y₁₉mT of the MIS 5e as the key surface, we propose that the terraces of the Y₅₃mT and ℓHT₁, Y₄₃mT and ℓHT₂, T₃₃mT and ℓMT₁, Y₂₄mT and ℓMT₂, Y₁₉mT and ℓLT₁, and Y₁₁mT and ℓLT₂ have been formed at the MIS 11, 9, 7e and 7a (or 7a), 5e and 5a respectively. The red soils have been developed at the Y₁₉mT and ℓLT₁ and above them, but not on the Y₁₁mT and ℓLT₂ surfaces.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.144-155
• /
• 2000

초록 The validity, of a single parameter such as stress intensity, factor K or J-integral in traditional fracture mechanics depends strongly on the geometry, and loading condition. Therefore the second parameter like T-stress measuring the stress constraint is additionally needed to characterize the general crack-tip fields. While many, research works have been done to verify, the J-T description of elastic-plastic crack-tip stress fields in plane strain specimens, limited works (especially. for bimaterials) have been performed to describe the structural surface crack-front stress fields with the two parameters. On this background, via detailed three dimensional finite element analyses for surface-cracked plates and straight pipes of homogeneous materials and bimaterials under various loadings, we investigate the extended validity or limitation of the two parameter approach. We here first develop a full 3D mesh generating program for semi-elliptical surface cracks, and calculate elastic T-stress from the obtained finite element stress field. Comparing the J-T predictions to the elastic-plastic stresses from 3D finite element analyses. we then confirm the extended validity of fracture mechanics methodology based on the J-T two parameters in characterizing the surface crack-front fields of welded plates and pipes under various loadings.

• Environmental Mutagens and Carcinogens
• /
• v.24 no.2
• /
• pp.91-98
• /
• 2004

Although 2,3,7,8-tetrachlorodibenzo-p-dioxin(TCDD) is a powerful carcinogen in several species, limited model system exist to study carcinogenicity of this compound at cellular level. To enhance our under-standing of carcinogenicity of TCDD at cellular level, we investigated micronucleus (MN) frequency as a index of genetic toxicity and whether TCDD can transform the human cells in culture. Normal human cell lines, skin keratinocyte HaCaT, Chang liver and breast MCF10A cells were used. TCDD did not affect the cell viability of the Chang liver, HaCaT and MCF10A cells. The frequency of micronucleus was increased after treatment of TCDD for 24hr in Chang liver and HaCaT cells, but not changed in MCF10A cells. And we observed putative transformed cells in Chang liver cells exposed to 1 $\mu$M TCDD for 2 weeks. The putative transformed cells were also observed in HaCaT cells with subsequent exposure to TCDD (0.1, 1, 10, 100 nM) for 2 weeks after initial exposure to MNNG, but not observed in MCF10A cells. Collectively, these results indicate that the ability of TCDD to induce micronuclei may be involved in cellular transformation of Chang liver and HaCaT cells. Our putative TCDD-transformed cells of Chang liver and HaCaT are expected to provide a clue to the elucidation of TCDD-induced transformation pathway.

• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.24-28
• /
• 2017

In the Internet of Things (IoT), resource-limited smart devices communicate with each other while performing sensing and computation tasks. Thus, these devices can be exposed to various attacks being launched and spread through network. For instance, attacker can reuse the codes of IoT devices for malicious activity executions. In the sense that attacker can craft malicious codes by skillfully reusing codes stored in IoT devices, code-reuse attacks are generally considered to be dangerous. Although a variety of schemes have been proposed to defend against code-reuse attacks, code randomization is regarded as a representative defense technique against code-reuse attacks. Indeed, many research have been done on code randomization technique, however, there are little work on analysis of the interactions between code randomization defenses and code-reuse attacks although it is imperative problem to be explored. To provide the better understanding of these interactions in IoT, we analyze how code randomization defends against code-reuse attacks in IoT and perform simulation on it. Both analysis and simulation results show that the more frequently code randomizations occur, the less frequently code-reuse attacks succeed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.24-33
• /
• 2000

This paper investigates the relationship between J-integral and crack tip opening displacement, ${\delta}_t$ using Gordens results of numerical analysis. Estimation were carried out for several strength levels such as ultimate, flow, yield, ultimate-flow, flow-yield stress to determine the influence of strain hardening and the ratio of crack length to width on the $J-{\delta}_t$ relationship. It was found that for SE(B) specimens, the $J-{\delta}_t$ relationship can be applied to relate J to ${\delta}_t$ as follows $J=m_j{\times}{\sigma}_i{\times}{\delta}_t$ where $m_j=1.27773+0.8307({\alpha}/W)$, ${\sigma}_i:{\sigma}_U$, ${\sigma}_{U-F}={\frac{1}{2}} ({\sigma}_U+{\sigma}_F$), ${\sigma}_F$, ${\sigma}_F}$ $Y=({\sigma}_F+{\sigma}_Y)$, ${\sigma}_Y$