• 한국전기전자재료학회논문지
• /
• 제23권5호
• /
• pp.388-396
• /
• 2010

In this study, we propose characteristics improvement methods according to via hole plating method for FBAR Duplexer with bandwidth($T_x4: 1850 MHz ~ 1910 MHz, $R_x$:1930 MHz ~ 1990 MHz) which is used for wireless systems. Also, we designed and fabricated $3.8{\times}3.8{\times}1.8mm$ size microminiature FBAR Duplexer based on this proposal. First of all, in this study, we fabricated pentagon shape resonators by different size to make filter combination, and their quality factor(Q) are 687 with 6.6% of ${k_{eff}}^2$. Using this resonators, we designed $3{\times}2$ Type $T_x$ filter and $3{\times}4$ Type $R_x$ filter. The transmission line, which works as phase shifter, is designed with 210 ${\mu}m$ in width and 18 mm in length Stripline type. Inductor, which is used for matching component, is designed with width of 75 ${\mu}m$, a technically achievable minimum width. And adopted plating method of filling via hole with conductive epoxy for improved grounding and thermal conductivity. Using these configuration with all of the matching component values, we found Duplexer characteristics of -1.57 dB ~ -1.73 dB in insertion loss, -56 dB in attenuation at 1850 MHz ~ 1910 MHz of $T_x$ band. Also, found -2.71 dB ~ -3.23 dB in insertion loss, -58 dB in attenuation at 1930 MHz ~ 1990 MHz of $R_x$ band.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.116-118
• /
• 2018

oneM2M 글로벌 IoT 표준 미들웨어 플랫폼을 활용한 스마트시티 서비스 데이터 모델 지원 및 FIWARE NGSI 기반 Orion Broker 연동 개발 사례를 소개한다. 또한 flexContainer 리소스 타입을 활용한 서비스 데이터 모델 개발 및 oneM2M 릴리즈 3에서 공개된 Interworking Framework (TS-0033) 기반의 FIWARE NGSI 인터페이스 연동 개발 내용을 소개한다. 이를 통해 기존 contentInstance 리소스 타입 기반대비 데이터 모델 엘리먼트에 대한 직접 엑세스를 통한 구독/통지 기능을 활용할 수 있고 Interworking Framework을 활용한 FIWARE NGSI 인터페이스 연동을 표준 기반으로 구축하여 서비스 종속성 없는 스마트시티 플랫폼 간 데이터 연동을 구축할 수 있다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.97-101
• /
• 2001

Fine metal (Au, Ag, Cu) wire was extruded with hydrostatic extrusion process in cold condition. A vertical type 900kN hydrostatic extruder has been developed. The extruder was facilitated with high pressure container which are available for hot and cold forming. The container endured 1400MPa internal pressure and extrusion ratio To was achieved in cold forming for Au fine wire which had $600{\mu}m$ diameter. In contrast to the conventional macroscopic-sized-billet fine-wire requires higher extrusion pressure and effect of friction is much more significant.

• 공업화학
• /
• 제7권4호
• /
• pp.726-734
• /
• 1996

본 연구는 $Ba(OH)_2{\cdot}8H_2O$, 나프탈렌, 아세트아미드를 대상으로 이들 물질이 자동차용 축열시스템의 축열매체로서의 사용 가능성여부를 조사하고자 하였다. 이들 물질을 대상으로 고-액상전이 순환과정 동안 상전이에 따른 여러 현상들을 조사하고 축열매체로서 사용되기 위해 위험성없이 재순환시켜 반복할 수 있는 가능성이 조사되었다. 그리고 이들 물질을 안전하게 저장할 수 있는 적절한 저장용기를 찾고자 하였다. 본 연구에서는 이들 물질 중 $Ba(OH)_2{\cdot}8H_2O$가 가장 상안정성이 좋아 자동차용 축열시스템의 축열매체로서의 사용가능성이 높았으며 저장용기는 구리캡슐이 적절하였다.

• 기술사
• /
• 제34권2호
• /
• pp.19-22
• /
• 2001

We, T.H. ELEMA ENG. CO., LTD., have specialized in engineering and manufacturing of electric motor speed control systems for a wide variety of applications i.e. dock side cranes, container cranes etc. Having concentrated on the development of new technology, we have succeeded in localization developing a Magnetic Coupling Type Cable Reel, whereas Korean companies depended on foreign countries for the supply of them.

• Journal of Ship and Ocean Technology
• /
• 제4권4호
• /
• pp.34-44
• /
• 2000

This paper deals with the sea trial results of a fast craft with the hybrid supported type hul form. waterjet propulsion system and motion control system. The hybrid-type container ship operable in the sea with a wave height of y6 m, a speed of 50 knots and a payload of 1,500 tons were designed. A 1/8 scale 10 m- long test craft was constructed and tested in open seas. The hydrodynamic performance such as speed, turning, motion control in waves and waterjet thrush was analyzed.

• 한국표면공학회지
• /
• 제46권6호
• /
• pp.283-289
• /
• 2013

The experimental study for the temperature uniformity on the wafer using liquid-vapor phase heat transfer mechanism is performed. For the experiment, the heater plate which is consist of stainless steel container, working fluid and electrical heater is designed, manufactured and tested at the range of 600 to $850^{\circ}C$. The results showed that the phase change type heater plate was much more uniform and stable temperature on the heater plate surface and wafer than the uniform heat flux type heater plate at the atmospheric condition. Also, the results of 300 mm outer diameter of heater plate showed that the same temperature uniformity compared with 230 mm.

• 한국항만학회지
• /
• 제13권2호
• /
• pp.199-214
• /
• 1999

Recently leading edge companies use the Supply Chain Management as a competitive weapon to secure and maintain customer loyalty. As a consequency they are concentrating resources on the company’s core business and employing strategic alliances with third-party providers to ensure the company provides its customers’desired logistics service levels at acceptable costs. Under this circumstances this paper surveys the third party logistics as a leading edge logistics industry coping with the progress of the supply chain management. The status and the type of the TPL including the Forwarder are analyzed in the view point of global logistics. Also the development strategy of third party logistics in the future is suggested.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.399-400
• /
• 2006

LMTT(Linear Motor based Transfer Technology) is a new type of transfer system used in the maritime container terminal fur the port automation, and largely consists of a controller, shuttle car, and rail. The shuttle car is divided into the frame part, the driving part, and wheels. In order to design this system, various researches on each part of it must be conducted. In this study, we dealt with the optimum design for the frame part of the shuttle car designed from previous studies on the strength of the frame with respect to the number of cross beams to minimize the weight of the shuttle car and to satisfy design criteria of cargo-handling systems in container terminal. For the optimization of the frame, thicknesses of each beam were adopted as design variables, the weight of the frame as objective function, and stress and deflection per unit length as constraint condition.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.582-585
• /
• 2015

고령화 사회로 인한 관절 질환 환자의 증가로 TKRA(Total Knee Replacement Arthroplasty)가 증가하고 있다. 이에 따라 TKRA에 사용되는 인공관절에 의해 MRI영상에서 금속인공물이 발생하게 되는데 이는 진단에 영향을 미치게 된다. 그러므로 본 논문에서는 Co-Cr, Ni-Ti 소재의 인공관절과 시퀀스 변화를 주어 영상에서의 영향을 최소화시켜 진단의 효과를 높이고자 한다. 1.5T AVANTO장비와 플라스틱 통, 각각의 인공관절(Normal, Co-Cr, Ni-Ti)을 사용하였으며 종이컵 안에 인공관절을 고정시킨 후 원통 모양의 플라스틱 통 안에 넣어 신호강도를 측정하였다. 균일하고 강한 신호강도를 획득하기 위하여 플라스틱 통은 물로 채웠다. 시퀀스는 T1 TSE, T2 TSE, PD TSE로 변화하면서 실험하였고 Axial영상을 획득하였다. 신호강도는 동일한 크기의 관심영역을 설정하여 최대값, 최소값을 제외한 후 평균을 구해 SNR, CNR을 측정하고 Image J를 이용해 PSNR을 측정하였다. 결과적으로 PD TSE가 T1 TSE, T2 TSE에 비하여 SNR과 CNR 값이 크게 나타나왔고 Co-Cr이 Ni-Ti에 비하여 PSNR의 수치도 크게 나타나고 Normal의 SNR 값과 유사하게 나타난 것으로 보아 PD TSE의 시퀀스와 Co-Cr의 합금을 사용하는 것이 진단 및 판독을 하는데 있어서 유용할 것으로 사료된다.