• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.481-482
• /
• 2012

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.133-136
• /
• 2006

The top-down construction method is an excavation and substructure construction method by excavating earth and building slabs from the ground level to the bottom of a building. The top-down method can be categorized into several types by its process and other technical details. Some of commonly used top-down methods in Korea today are S.O.G., N.S.T.D., and S.P.S. Among these, one method is chosen depending on construction field conditions, cost, construction time and so on. This study explores several factors that may affect the selection of a top-down method. This paper reports preliminary survey results with 54 top-down construction experts and comparison results of 5 top-down construction sites.

• 한국강구조학회 논문집
• /
• 제27권1호
• /
• pp.99-108
• /
• 2015

상하부 스플릿 T 접합부를 이용한 스마트 CFT 기둥-보 접합부는 긴결재의 직경과 체결력, 스플릿 T 형강의 기하학적 형상, 재료적 물성 특성 등의 변화에 의하여 상이한 거동특성을 나타낸다. 본 논문은 반복하중을 받는 상 하부 스플릿 T 접합부의 구조적 거동에 대해 체계적으로 수행된 3차원 비선형 유한요소 해석으로부터 얻은 결과를 제시하고 있다. 이러한 상 하부 스플릿 T 접합부는 CFT 합성골조의 변위복원 및 충분한 에너지 소산 능력을 확보하기 위하여 초탄성 성질을 갖는 형상기억합금(SMA)과 강으로 제작된 봉과 T-stub가 적용된다. 부가적인 다양한 구조적 거동은 T-stub의 두께 및 게이지 거리로 상 하부 스플릿 T 접합부의 파라미터에 대한 영향을 설명하고 있다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제4권3호
• /
• pp.153-160
• /
• 2000

In simply supported composite beams, the neutral axis of the composite cross section usually is located the top flange of the steel I-shape, so that the top flange does not impart much strength to the member. This suggests that omitting the top flange entirely could be a means to lower the cost of the beam without greatly reducing the strength. The purpose of this investigation is to research flexural strength and behavior of the composite beams with reduced top flange of steel. Five specimens with H and inverted T steel section were tested. As the test results, comparison of the experimental to computed full-plastic moment, and variations of flexural strength with reduced top flange were analyzed.

• 한국정보통신학회논문지
• /
• 제20권3호
• /
• pp.571-576
• /
• 2016

비대칭 이중게이트 MOSFET는 다른 상하단 게이트 산화막 두께를 갖는다. 상하단 게이트 산화막 두께 비에 대한 문턱전압이하 스윙 및 전도중심의 변화에 대하여 분석하고자한다. 문턱전압이하 스윙은 전도중심에 따라 변화하며 전도중심은 상하단의 산화막 두께에 따라 변화한다. 비대칭 이중게이트 MOSFET는 문턱전압이하 스윙의 저하 등 단채널효과를 감소시키기에 유용한 소자로 알려져 있다. 포아송방정식의 해석학적 해를 이용하여 문턱전압이하 스윙을 유도하였으며 상하단의 산화막 두께 비가 전도중심 및 문턱전압이하 스윙에 미치는 영향을 분석하였다. 문턱전압이하 스윙 및 전도중심은 상하단 게이트 산화막 두께 비에 따라 큰 변화를 나타냈다. 특히 하단 게이트 전압은 문턱전압이하 스윙에 큰 영향을 미치며 하단게이트 전압이 0.7V 일 때 $0<t_{ox2}/t_{ox1}<5$의 범위에서 문턱전압이하 스윙이 약 200 mV/dec 정도 변화하는 것을 알 수 있었다.

• 한국토양비료학회지
• /
• 제50권6호
• /
• pp.634-643
• /
• 2017

No-tillage is an effective practice to save labor input and reduce methane emission from the paddy. Effects of tillage and cultivation methods on carbon accumulation and soil properties were investigated in the treatments of tillage-transplanting (T-T), tillage-wet hill seeding (T-WS), minimum tillage-dry seeding (MT-S) and no-tillage dry seeding (NT-S) of rice. Soil carbon was higher in NT-S and MT-S, compared to T-T and T-WS. In NT-S and MT-S, soil carbon contents were the highest in the top soil (5 cm depth) and decreased with soil depth. In T-T and T-WS, however soil carbon contents showed no significant difference up to soil depth of 15 cm from the top. Carbon content was the highest in the soil particle size under $106{\mu}m$ and decreased as the soil particle size increased. Contents of water-stable aggregates in NT-S and MT-S were higher than those of T-T and T-WS. In NT-S and MT-S, contents of water-stable aggregates were the highest in the top soil and significantly decreased with soil depth while no significant difference up to the soil depth of 15 cm in T-T and T-WS. Available $SiO_2$ contents in the top soil were the highest in NT-S and MT-S while the lowest in T-T and T-WS. It is concluded that minimum or no disturbance of soil in rice cultivation can increase carbon accumulation in the soil, especially in the top layer, and subsequently contribute to the formation of the water-stable soil aggregates.

• Journal of Ecology and Environment
• /
• 제29권5호
• /
• pp.439-443
• /
• 2006

Soil properties of Quercus variabilis forest on Youngha valley at Mt. Worak National Park were studied as a part of Korea National Long-Term Ecological Research. Soil sampling was carried out along the 50 cm soil depth with 10cm intervals at every quarter from May 2005 through July 2006. Fresh soil was used for $NH_4{^+}-N,\;NO_3{^-}-N$, and soil water content determination. Remaining soils were air dried in the shade, and then used for determination of soil pH, T-N, T-P and exchangeable cation. Average soil organic matter in top soil was $8.5{\pm}1.2%$ and decreased with soil depth. Bulk density of top soil was $0.82{\pm}0.07g/cm^3 $and increased with soil depth. Soil organic matter and bulk density showed a negative linear correlation ($R^2=0.8464$). Soil pH in top soil and subsoil was similar. T-N, $NH_4{^+}-N,\;NO_3{^-}-N$ and T-P in top soil were $1.9{\pm}0.5mg/g,\;7.3{\pm}1.0mg/kg,\;2.0{\pm}0.4mg/kg\;and\;0.2{\pm}0.05mg/g$, respectively. $K^+,\;Ca^{2+}\;and\;Mg^{2+}$ in top soil were $84.6{\pm}24.4,\;408.8{\pm}137.8\;and\;93.4{\pm}23.0mg/kg$, respectively. They decreased with soil depth. Amounts of organic matter, T-N, $NH_4{^+}-N,\;NO_3{^-}-N$, T-P, $K^+,\;Ca^{2+}\;and\;Mg^{2+}$ in 50 cm soil depth were 250.9, 3.45, 0.025, 0.003, 0.639, 0.181, 0.845 and 0.302 ton $ha^{-1}\;50cm-depth^{-1}$, respectively.

• 한국초지조사료학회지
• /
• 제7권1호
• /
• pp.37-41
• /
• 1987

The purpose of this study is to clarify the effect of top dressing on the thatch losses in bentgrass (Agrostis palustris). Top dressing materials used were clay loam, sand, zeolite, and sawdust. Data were taken on July 10 ($T_1$), Aug. 7 (($T_2$ ) and Sept. 4 (($T_3$) respectively. The results are summarized as follows: 1. The dry weight of accumulated thatch was significantly different between treatments and dates of survery, and for the interaction of treatment x date of survey. 2. The dry weight of accumulated thatch showed a tendency to decrease as growth progressed in all treatments. (Table 1) The dry weight of accumulated thatch was the smallest at sand but the largest at clay loam in each date of survey. 3. The losses rate of accumulated thatch showed a tendency to slightly increase as affected by top dressing materials. (Table 2) Sand showed a significantly higher losses rate of accumulated thatch than that of other treatments. 4. The dry weight of accumulated thatch showed a significant negative correlation (p<0.01) with the losses rate of accumulated thatch. (Fig. 1) 5. Turf coverage was significant difference between treatments and dates of survey. 6. Turf coverage showed a tendency to increase as growth progressed in all treatments. (Table 3) 7. Turf coverage indicated significant negative correlation (p<0.001) with the dry weight of accumulated thatch. (Fig. 2)

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.445-450
• /
• 2012

BIPV/T (Building Intergrated PhotoVoltaic/Thermal) is combined system produces electricity and thermal energy. The heat from PV modules should be removed for better electrical performance, and can be converted into useful thermal energy. The efficiency of the PV system's performance will raise by the system removes heat from the PV. The test system is installed to top floor of the experimental house in the KEPCO Research Institute. The planned experiment is following. (1) Supplying heat energy to top floor. (2) Supplying heat and cool energy to thermal storage in the bottom of the top floor. (3) Supplying heat energy to EHP for improved performance. The experimental performance is executed from 13th February to 13th March, 2012. The solar generation of electricity is 4.04kWh under the horizontal solar radiation is $1000W/m^2$ and the air temperature is $25^{\circ}C$.

• 한국콘텐츠학회논문지
• /
• 제2권4호
• /
• pp.99-103
• /
• 2002

본 논문에서는 t 준노름이 연속인 경우 이미 주어진 퍼지 측도에 관한 측정 가능한 함수의 준 노름 퍼지 적분을 이용하여 퍼지 측도를 정의하는 방법에 대해서 조사했다. 즉 (X, F, g)이 퍼지 측도 공간이라고 하고 h$\in$L$^\circ$(X), 이며 $\top$는 연속 t 준노름이라 하자. 그러면 임의의 $A\in$F에 대해 $\nu$(A)=$\int _A$h$\top$g에 의하여 정의된 집합치 함수 $\nu$는 (X, F)상에서 퍼지 측도이다.