• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.1
• /
• pp.1-10
• /
• 1993

The purpose of this study was to evlauate the microleakage of 3 dentin bonding agents using different dentin pretreatment method under simulated physilogic pressure in cementing the porcelain laminate veneer. Noncarious 60 human maxillary molars were selected and randomly assigned to 4 groups of 15 each. The group with the margin placed on the enamel was classified as the control and the groups with the margin placed on root surface were subdivided into 3 groups according to the dentin bonding agents used. The group using All Bond 2 was classified as experimental group 1, the group using Scotchbond MP was classified as experimental group 2, and the group using Gluma was classified as experimental group 3. Roots were removed at 3mm below the cementoenamel junction, and reductions of the teeth for the porcelain laminate veneer were done on the mesial 1/2 of the buccal surface of each teeth. The pulp was extirpated and the pulp chamber was cleaned with 37% phosphoric acid for the patency of dentinal tubule. Under simulated physiologic pressure, porcelain laminate veneers were cemented to the teeth using each dentin bonding agent and luting cement. After cementation, all samples were stored at 36t in water for 24 hours and thermocycled for 1500 cycles, then immersed in 0.5% basic fuchsin solution and the teeth were sectioned longitudinally by using diamond saw and the extent of microleakage was measured. The following results were obtained, 1. Microleakage was observed in a few samples of control group but all the samples of experimental groups. 2. The control group showed the less extent of microleakage than the experimental groups. In experimental groups the experimental group 1 & the experimental group 2 showed similiar extent of microleakage and the experimental group 3 showed the greater extent of microleakage than other groups. Conclusively, practicing the porcelain laminate veneers in the clinic, although the margin of the porcelain laminate veneer should be placed on enamel, in the case that it is inevitable to place the margin of the porcelain laminate veneer on the root surface, it is recommened to use dentin bonding agents which use no dentin pretreatment or a dentin pretreatment which can leave the smear plugs.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.53-61
• /
• 2009

The property of pit and fissure sealant has been improved and many studies on the bond strength, penetration, microleakage have been published. But there are few studies on the using status and perception of pit and fissure sealant within the country. Therefore, this study made a survey on it. Pedodontists and non-pedodontists were surveyed by interview. The Results were as follows; 1. On caries prevention effect, 96.7% of the pedodontists replied that sealants were effective on both permanent teeth and primary teeth. On the other hand, 13.5% of the non-pedodontists replied that sealants weren't effective on both. 2. All of the pedodontists and 27% of the non-pedodontists used rubber dams. 83.3% of the pedodontists and 40.5% of the non-pedodontists used bonding agents. 3. Non-pedodontists used enameloplasty more frequently than Pedodontists but the pattern was not significantly different. 4. The causes of sealant failures included salivary contamination, caries under sealant, low strength, low flowability, overfilling. 5. In the pedodontists, 90% replied that PRR application was desirable and PRR applications were more frequent than sealant application.

• Journal of the Korea Concrete Institute
• /
• v.13 no.5
• /
• pp.491-498
• /
• 2001

The failure phenomenon of overlaid concrete structures, such as surface crack and peel-off failure in the contact zone, was investigated due to temperature shock(rainfall). To investigate this failure phenomenon, the surface tensile stress, and the shear stress, the vertical tensile stress in the contact zone were analysed using the non-linear stress-strain relationship of material such as strain-hardening- and strain-softening diagrams. Rainfall intensity, overlay thickness and overlay material were the main variables in the analyses. It is assumed that the initial temperature of overlaid concrete structures was heated up to 55$\^{C}$ by the solar heat. With a rain temperature 10$\^{C}$ and the rainfall intensity of nR=1/a, tR=10min, 60min, the stress states of overlaid concrete structures were calculated. The result shows that only fictitious cracks occurred in the overlay surface and no shear bond failure occurred in the contact zone. The vortical tensile stress increasing with overlay thickness was proved to be the cause of peel-off failure in the contact zone. The formulae for relationship between the vertical tensile stress and overlay thickness, material properties were derived. Using this formulae, it is possible to select proper material and overlay thickness to prevent failure in the contact zone due to temperature shock caused by rainfall.

• Journal of Animal Science and Technology
• /
• v.44 no.4
• /
• pp.427-442
• /
• 2002

Conjugated linoleic acid(CLA) is a collective term for a group of positional (c8, c10; c9, c11; c10, c12, and c11, c13) and geometric(cis,cis; cis,trans; trans,cis; and trans,trans) isomers of octadecadienoic acid (linoleic acid) with conjugated double bond system. CLA has been shown to have a variety of biological effects. Major effects of CLA on health, such as anti-cancer, anti-oxidation, anti-atherosclerosis and improving immuno-responses, might be derived or partially derived from the alternated lipid metabolism after CLA feeding. Most of studies on the effect of CLA on fat metabolism are concentrated on rats, mice, pigs and other mammals. The CLA inhibited carcinogen-induced neoplasia in several animal models and inhibited the proliferation of human malignant melanoma, colorectal and breast cancer cells and CLA reduced the atherosclerosis. Several studies have determined the antioxidant property of CLA; however, the property still remains controversial. Some of the studies have shown that CLA acted as an antioxidant, whereas some other studies have demonstrated that CLA might be a prooxidant. Several studies suggested that CLA could reduce fat accumulation in mammals. CLA was suggested to promote muscle growth and reduce fat deposition in mouse, and improve feed efficiency in rats. CLA has been shown to inhibit the activity of stearoyl-CoA reductase. CLA also reduced the content of arachidonic acid. Since arachidonic acid, and eicosapentaenoic acid (EPA) and docosahexenoic acid (DHA) are synthesized by different pathways, reducing the synthesis of arachidonic acid may not mean reducing that of EPA and DHA. Many sutdies have been shown biological effects of CLA. Therefore, further research is needed to answer the following questions: 1) how to synthesize the new CLA by new methods, 2) why CLA has shown biological effects, 3) how to increase CLA effects in animal products.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.46
• /
• pp.133-158
• /
• 2010

Independent guarantee is a creation of the need from the both sides, i.e. the applicant (principal debtor) and the beneficiary (creditor). The former used to have to deposit cash in favor of the beneficiary in case of his default, which laid a burden on his liquidity while the latter still wanted to have the equivalent to cash. Independent guarantee satisfied the both parties by freeing the applicant of a deposit and maintaining the beneficiary's right at the same time. The fact that independent guarantee has three payment mechanisms is not widely known to the public. They are (i) payment on first demand, (ii) payment upon submission of third-party documents, (iii) payment upon submission of an arbitral or court decision. From the applicant's point of view, the order in his favor is (iii), followed by (ii) and (i). As there shouldn't be a case where one party is at a disadvantage against the other, useful insight is being sought for the benefit of the applicant. First, the applicant can offer his intention to provide a payment mechanism (ii) or (iii) rather than (i) if he must deliver it. Second, if the beneficiary still wants to have (i) and the applicant is in a position not to reject it, the latter should thoroughly check any provisions that may work against him later. Third, the applicant could use counterbalancing provisions in underlying contract to cope with protective clauses in the guarantees. Forth, the applicant should review the beneficiary's sincerity to prevent unfair calling risks. The applicant may use an ECA(Export Credit Agency) in his country to which he can transfer not only unfair calling risks, but also political risks. On the other hand, a bank needs to keep the following advice in mind. The foremost important thing for the bank not to forget is that it provides a guarantee as a service provider, not as a responsible party for the feasibility of the project, etc. Credit risk of the applicant should require the greatest attention when issuing a guarantee: the bank should look into the possibility that it can procure immediate reimbursement from its customers after payment to the beneficiary. Second, the applicant's ability to complete the project should be reviewed by checking its track records, techniques and reputation, etc. Third, the bank may also use an ECA to cover the beneficiary's unfair calling risks as well as political risks. In the case of Korea, as Korea Export Insurance Corporation(KEIC) can cover all the risks mentioned above, the bank could use its service called 'Export Bond Insurance.' What's better for the bank is that ECA cover can enhance the bank's asset quality by putting it zero on its risk weighted asset.

• Hwankyungkyoyuk
• /
• v.18 no.2 s.27
• /
• pp.76-89
• /
• 2005

The objectives of this study are to identify the environmental consumer behavior, to examine the degree of environmental consumer behavior of the junior high school students, and to investigate the educational system of a school which influence the consumer behavior. The data used in this study are 368 male and female students in 9th grade in Anyang City, Kyunggi-do province. Statistics used for data analysis are means, standard deviation, t-test, and Multiple Regression Analysis. The results of the research are summarized as follows : First of all, as a tendency of the environmental consumer behavior of junior high students, the primary factor to the environmental problems was media, and among those, TV and radio was the medium to environmental problems. This implies the fact that the time juveniles interact with mass media is significantly growing, which means that transmitting environmental problems by programs targeted to adolescences through mass media would be effective. Next, the disposal process showed the highest environmental consumer behavior, followed by the consuming and purchasing process. Education on the purchasing process will be necessary to encourage environmental consumer behavior. The route of obtaining environmental knowledge was basically from school and the level of the average environmental knowledge fumed out to be low. This shows the need to produce and distribute media education materials because educating the conclusion of actual experiments will be more effective than that of theoretical studies. The conformity showed general indifference on environmental consumer behavior and the environmental resources were normally collected seperated. Conformity is a cultural bond teenagers think important, therefore education available for students about the same age should be developed. Next, the value intention of the surveyed showed that the ecological intention was highest, followed by economic and convenience intentions. This means the morale of the junior high students to environmental consumer behavior is set sound. Females tended to act more environmentally, while males showed more intention to economic causes. Also, the students of the boys-only or girls-only schools showed higher environmentally sound behavior in disposal processes. Finally, the environmental consumer behavior was influenced most by environmental consumer behavior of the conformity group, followed by ecological morale, frequency of encountering environmental problems, gender, environmental knowledge, whether the school was boys-only or girls-only or not, economical morale, respectively. The largest factor affecting the consumer activity of the purchase, consumption, and disposal process was environmental consumer behavior of the conformity group, along with the ecological morale, and the frequency of encountering environmental problems. This implies that conformity group is a large factor to the juveniles and a plan to entice the environmental consumer behavior of conformity groups are necessary.

• Journal of Navigation and Port Research
• /
• v.38 no.2
• /
• pp.185-191
• /
• 2014

With the 500th anniversary commemoration of Gerard Mercator's birth in 2012 now passed, there is the possibility that his name will fade back into obscurity. This would be both unfair and pitiful, because Gerard Mercator's name should be highly regarded as one of the principal contributors to navigational science and the promotion of marine safety. An accomplished cartographer, in 1569 Mercator published a remarkable 18-folio world map, depicting the then-known world in a new format with straight rhumb lines. While this distorted the size of land masses, particularly in higher latitudes, this new projection made navigation much easier for now all sailors had to do was to draw a straight line between two points to plot their course. Mercator clearly had this navigational benefit in mind, though his contemporaries did not immediately recognize its value. It wasn't until after Mercator's death, when Edward Wright (1599) and Henry Bond (1645) used and explained the new projection and demonstrated the use of straight rhumb lines in navigation that the Mercator projection became the standard for sea charts. Today, 450 years later of his death, electronic charts still rely on the projection Mercator invented and developed, confirming his position as a giant in the history of navigation. This paper introduces his life and work, detailing the importance of the 1569 world map and its contribution to navigational science and safety.

• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.489-496
• /
• 2006

Graft copolymerized polycarboxylate(PC)-type superplasticizers which have carboxylic acid with $\pi$ bond among the molecular structure and polyethyleneglycol methyl ether methacrylate(PMEM) were synthesized by free radical reaction. To investigate their chemical structures and molecular weights, PCs were analyzed by FT-IR(fourier transform spectrometer), C-NMR(nuclear magnetic resonance spectrometer) and GPC(gel permeation chromatograpy). When types of carboxylic acids(methacrylic acid, acrylic acid, maleic anhydride, and itaconic acid) and molar ratios of carboxylic acid/PMEM) were varied, adsorptive and fluid characteristics in cement paste were discussed. As the molar ratio of carboxylic acid/PMEM) was higher, amount adsorbed on the cement particles and the fluidity of cement paste by mini-slump spread testing method were increased. When main chain of PC was methacrylic acid, a larger amount was adsorbed on the cement particles. PCs with acrylic acid as main chain showed higher dispersing power. However, it was confirmed that PCs with dicarboxylic acids(maleic anhydride, itaconic acid) didn't have good adsorption and dispersibility.

• Cartoon and Animation Studies
• /
• s.45
• /
• pp.101-125
• /
• 2016

This study aims to take a look at the esthetics of communication in Bastien $Viv{\grave{e}}s$. Bastien $Viv{\grave{e}}s$ is the famous author of the graphic novel in France. Then this paper studies both of expressive properties and narrative strategy in Bastien $Viv{\grave{e}}s$ "Elle(s)", "Les $go{\hat{u}}t$ du chlore" and "Dans mes yeux" that have been recognized the series 'story of young love'. His characteristic style is the detail and delicate description of emotions in the visual expression and the narrative. His story is mainly about the love of the young(adolescent) and the communication of man and woman. Through these three books, he wants to describe how important the communication is to man and woman who are falling in love. He gives a talk about the pain of first love(and puppy love) with the simple structure like the freinds' casual activities. And with open-ending, he leaves something to the imagination for readers. This strategy evoke a feeling of first love in the readers. At these last scenes, a bond of sympathy is developing between readers. Finally, we have failed to communicate with her in first love.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.717-723
• /
• 2007

Statement of problem. Unreasonable distal cantilevered implant-supported prosthesis can mask functional problems of reconstruction temporarily, but it can cause serious strain and stress around its supported implant and surrounding alveolar bone. Purpose. The purpose of this study was to evaluate strain of implants supporting distal cantilevered fixed prosthesis with two different cantilevered length under distal cantilevered static load. Material and methods. A partially edentulous mandibular test model was fabricated with auto-polymerizing resin (POLYUROCK; Metalor technologies, Stuttgart, Swiss) and artificial denture teeth (Endura; Shofu inc., Kyoto, Japan). Two implants-supported 5-unit screw-retained cantilevered fixed prosthesis was made using standard methods with Type III gold alloy (Harmony C&B55; Ivoclar-vivadent, Liechtenstein, Germany) for superstructure and reinforced hard resin (Tescera; Ivoclar-vivadent, Liechtenstein, Germany) for occlusal material. Two strain gauges (KFG-1-120-C1-11L1M2R; KYOWA electronic instruments, Tokyo, Japan) were then attached to the mesial and the distal surface of each standard abutment with adhesive (M-bond 200; Tokuyama, Tokyo, Japan). Total four strain gauges were attached to test model and connected to dynamic signal conditioning strain amplifier (CTA1000; Curiotech inc., Paju, Korea). The stepped $20{\sim}100$ N in 25 N increments, cantilevered static load 8mm apart (Group I) or 16mm apart (Group II), were applied using digital push-pull gauge (Push-Pull Scale & Digital Force Gauge, Axis inc., Seoul, Korea). Each step was performed ten times and every strain signal was monitored and recorded. Results. In case of Group I, the strain values were surveyed by $80.7{\sim}353.8{\mu}m$ in Ch1, $7.5{\sim}47.9{\mu}m/m$ in Ch2, $45.7{\sim}278.6{\mu}m/m$ in Ch3 and $-212.2{\sim}718.7{\mu}m/m$ in Ch4 depending on increasing cantilevered static load. On the other hand, the strain values of Group II were surveyed by $149.9{\sim}612.8{\mu}m/m$ in Ch1, $26.0{\sim}168.5{\mu}m/m$ in Ch2, $114.3{\sim}632.3{\mu}m/m$ in Ch3, and $-323.2{\sim}-894.7{\mu}m/m$ in Ch4. Conclusion. A comparative statistical analysis using paired sample t-test about Group I Vs Group II under distal cantilevered load shows that there are statistical significant differences for all 4 channels (P<0.05).