• 소성∙가공
• /
• 제16권4호
• /
• pp.304-308
• /
• 2007

Failure phenomena in uni-axial tension test were experimentally and numerically investigated for AA6111-T4, AA5083-H18 and DP-Steel, which were friction-stir welded with the same and different thicknesses. Forming limit diagram(FLD) was measured using hemispherical dome stretching tests for base materials and also predicted by Hill's bifurcation and M-K theories for welded areas. Finite element simulations well predicted hardening behaviors, failure locations as well as failure patterns for the uni-axial tension tests especially utilizing very fine meshes and FLD along with stress softening.

• 한국수산과학회지
• /
• 제11권2호
• /
• pp.49-54
• /
• 1978

한국 동해안해역에서 하계에 출현하는 냉수괴의 생성기구를 해양화학적인 측면에서 검토한 결과를 요약하면 다음과 같다. 1. 동해연안의 냉수괴출현해역의 인산염과 용존산계의 특수한 관계를 조사한 결과 동해남부 연안해역인 감포부근 해역에서만 용승현상을 인정할 수 있었으나 그 이북 동해중부해역에서는 용승현상을 인정할 수 없었다. 2. $\sigma_t-O_2$ diagram에 의해 동해연안해역의 구성수괴를 분석하면 T-S diagram 으로는 구별하기 어려운 북한한류계수와 일본해고유냉수를 구별할 수 있었다. 3. 동해남부 연안해역을 제외한 동해중부 연안해역에 출현하는 냉수괴의 기원은 일본해고유냉수의 용승에 의한 것이 아니고, 북한한류가 안안을 따라 남하하는 현상 때문으로 보인다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.289-293
• /
• 2007

The effect of temperature on the forming limit diagram was investigated for AZ31B magnesium alloy sheet through the limit dome height test in the range from room temperature to $300^{\circ}C$. The formability of AZ31B sheet was improved significantly according to the increasing temperature. Also we studied the springback characteristics through the 2D draw bending test with different blank holding forces at elevated temperatures. Springback quantity was considerably reduced as temperature went up. The blank holding force in the range used, however, had little influence on springback. Experimental results obtained in this study may provide a material database for AZ31B sheet.

• 소성∙가공
• /
• 제16권5호통권95호
• /
• pp.364-369
• /
• 2007

The effect of temperature on the forming limit diagram was investigated for AZ31B magnesium alloy sheet through the limit dome height test in the range from room temperature to $300^{\circ}C$. The formability of AZ31B sheet was improved significantly according to the increasing temperature. Also we studied the springback characteristics through the 2D draw bending test with different blank holding forces at elevated temperatures. Springback quantity was considerably reduced as temperature went up. The blank holding force in the range used, however, had little influence on springback. Experimental results obtained in this study may provide a material database for AZ31B sheet.

• 소성∙가공
• /
• 제18권8호
• /
• pp.596-600
• /
• 2009

Finite element simulation is an alternative method to practically find the forming limit diagram(FLD). In this paper, the novel fracture criterion is utilized to predict the FLD in conjunction with finite element analysis for sheet forming. The principal scheme of the fracture criterion in this paper is that growth of the micro voids leads up to fracture in the viewpoint of micro-mechanics. The numerical FLD is verified by results of the out-of plane stretching test using hemispherical punch. The verification is also conducted about two types of material. These results are in good accord with the experimental results. Especially, the proposed scheme is appropriate to predict FLDs for a restricted material with low ductility after the instability point or ultimate tensile strength.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.87-88
• /
• 2009

• East Asian mathematical journal
• /
• 제36권5호
• /
• pp.537-545
• /
• 2020

We investigate some polynomial invariants for virtual knots via virtualization moves. We define two types of polynomials W_G(t) and S²_G(t) from the definition of the index polynomial for virtual knots. And we show that they are invariants for virtual knots on the quotient ring Z[t^±1]/I where I is an ideal generated by t² - 1.

• 소성∙가공
• /
• 제14권6호
• /
• pp.514-519
• /
• 2005

A tube hydroformability testing system was designed and fabricated enabling to apply the forming condition along arbitrarily pre-programmed internal pressure-axial feed path. The free-bulging and T-forming tests were carried out on the extruded aluminum (A6063) tube specimens with 40.6 mm outer diameter and 2.25 mm thickness. Nine different combinations of internal pressure and axial feed, yielding different strain paths from one another, were taken into consideration in order to induce bursting at various deformation modes. Major and minor strains were automatically measured from deformed grids around the fracture using a stereo-vision-based surface strain measurement system, named ASIAS. The forming limit diagram of the A6063 tube material was successfully obtained. Most of the data points acquired from free bulging and T-forming tests appeared in the range of negative minor strain on the FLD and are mostly located near the strain paths calculated from explicit finite element simulations. The forming limit obtained from tests after pre-tension was considerably lower than that from tests without pre-tension, which showed the strain path-dependency of the forming limit as well known in the sheet forming fold.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.253-257
• /
• 2005

A tube hydroformability testing system was designed and fabricated so as to observe the forming process and to apply forming condition along arbitrarily pre-programmed internal pressure-axial feed path. The forming limit diagram of A6063 extruded tube, of 40.6 mm outer diameter and 2.25 mm thickness, was successfully obtained through free bulging and T-forming tests except the region of high positive minor strain. It is found that the data points marked on the FLD are mostly located near the strain paths from the finite element analysis excluding the cases of large axial feed. There exist data points even in the area beyond the uniaxial tension mode, since the reduction in thickness decreases due to the axial feed. The forming limit from T-forming test was considerably lower than that from free bulge test. It seems because the deformation is localized at the pole.

• Kyungpook Mathematical Journal
• /
• 제62권2호
• /
• pp.347-361
• /
• 2022

Two virtual knot diagrams are said to be equivalent, if there is a sequence S of Reidemeister moves and virtual moves relating them. The difference of writhes of the two virtual knot diagrams gives a lower bound for the number of the first Reidemeister moves in S. In previous work, we introduced a polynomial q_K(t) for a virtual knot diagram K which gave a lower bound for the number of the third Reidemeister moves in the sequence S. In this paper we define a new polynomial from a coloring of a virtual knot diagram. Using this polynomial, we give a lower bound for the number of the second Reidemeister moves in S. The polynomial also suggests the design of the sequence S.