References
- M. Imaninejad, G. Subhash, A. Loukus, 2004, Experimental and numerical investigation of freebulge formation during hydroforming of aluminum extrusions, J. Mat. Proc. Tech., Vol. 147, pp. 247-254 https://doi.org/10.1016/j.jmatprotec.2004.01.004
- M. Imaninejad, G. Subhash, A. Loukus, 2004, Influence of end-conditions during tube hydroforming aluminum extrusions, Int. J. Mech. Sci., Vol. 46, pp. 1195-1212 https://doi.org/10.1016/j.ijmecsci.2004.08.001
- S. Fuchizawa, M. Narazaki, 1993, Bulge test for detemining stress-strain characteristics of thin tubes, Advanced Technology of Plasticity, pp. 488-493
- H. Tetsumaro, N. Hisashi, 1993, Bulging limit of thin-walled aluminum tubes with a surface defect, Advanced Technology of Plasticity, pp. 527-532
- T. Sokolowski, K. Gerke, M. Ahmetoglu, T. Altan, 2000, Evaluation of tube formability and material characteristics: hydraulic bulge testing of tube, J. Mat. Proc. Tech., Vol. 98, pp. 34-40 https://doi.org/10.1016/S0924-0136(99)00303-9
- M. Jansson, L. Nilsson, K. Simonsson, 2005, On constitutive modeling of aluminum alloys for tube hydro forming applications, Int. J. Plasticity, Vol. 21, pp. 1041-1058 https://doi.org/10.1016/j.ijplas.2004.06.005
- A. Kulkarni, P. Biswas, R. Narasimhan, A. Luo, R. K. Mishra, T. B. Stoughton, A. K. Sachdev, 2004, An experimental and numerical study of necking initiation in aluminum alloy tubes during hydroforming, lnt. J. Mech. Sci., Vol. 46, pp.1727-1746 https://doi.org/10.1016/j.ijmecsci.2004.11.007
- 김영석, 조흥수, 박춘달, 김영삼, 조완제, 2000, Tube Hydroforming 공정의 성형성 평가, 한국소성가공학회지, 제 9 권 제 6 호, pp. 604-614
- S. T. Kim, Y. S. Kim, 2002, Analytical study for tube hydroforming, J. Mat. Proc. Tech., Vol. 128, pp. 232-239 https://doi.org/10.1016/S0924-0136(02)00456-9
- M. Koc, T. Altan, 2002, Prediction of forming limits and parameters in the tube hydro forming process, Int. J. Machine Tools & Manufacture, Vol. 42, pp. 123- 138 https://doi.org/10.1016/S0890-6955(01)00048-7
- L. Lei, J. Kim, B. S. Kang, 2002, Bursting failure prediction in tube hydroforming processes by using rigid-plastic FEM combined with ductile fracture criterion, International journal of mechanical sciences, Vol. 44, pp. 1411-1428 https://doi.org/10.1016/S0020-7403(02)00045-0
- 김상우, 김정, 박훈재, 강범수, 2004, 네킹발생 조건에 의한 관재 액압성형공정에서의 터짐불량 예측, 한국소성가공학회지, 제 13 권 제 7 호, pp. 629-634
- Pam System International S. A., 2001, PAM-STAMP User's Guide, Version 2001
- 김두수, 김형종, 1999, 비전을 이용한 곡면변형률 측정의 정확도 및 정밀도 향상에 관한 연구, 한국소성가공학회지, 제 8 권 제 3 호, pp. 294-305
- A. F. Graf and W. F. Hosford, 1993, Calculations of forming limit diagram for changing strain paths. Metallurgical Transactions A, Vol. 24, pp. 2497-2501 https://doi.org/10.1007/BF02646528
Cited by
- Investigation of Cracking Condition during Press Forming of Extruded Aluminum Sheets vol.38, pp.3, 2014, https://doi.org/10.3795/KSME-A.2014.38.3.251
- Optimization of the loading path for the tube-hydroforming process vol.230, pp.12, 2016, https://doi.org/10.1177/0954407015618051