• 대한수학회보
• /
• 제52권3호
• /
• pp.907-914
• /
• 2015

In this paper, we consider a viscoelastic plate equation with p-Laplacian $u^{{\prime}{\prime}}+{\Delta}^2u-div({\mid}{\nabla}u{\mid}^{p-2}{\nabla}u)+{\sigma}(t){\int}_{0}^{t}g(t-s){\Delta}u(s)ds-{\Delta}u^{\prime}=0$. By introducing suitable energy and Lyapunov functionals, we establish a general decay estimate for the energy, which depends on the behavior of both ${\sigma}$ and g.

• 한국전산유체공학회지
• /
• 제10권1호
• /
• pp.39-44
• /
• 2005

The numerical investigation of the interaction between the underexpanded supersonic jet and the perpendicular plate is carried out using the TVD numerical method. The wave structure in the flowfield and the pressure and temperature distributions on the plate surface are obtained by the numerical analysis. Especially, the influence of self-induced flow oscillation caused by the impinging jet and the characteristic of impinging jet are shown. From the result of the numerical analysis, it is concluded that the pressure and the temperature fluctuations on the plate surface strongly depends on the pressure ratio in the flowfield and the position of plate.

• Structural Engineering and Mechanics
• /
• 제15권6호
• /
• pp.685-704
• /
• 2003

The buckling and vibration characteristics of stiffened plates subjected to in-plane concentrated edge loading are studied using finite element method. The problem involves the effects of non-uniform stress distribution over the plate. Buckling loads and vibration frequencies are determined for different plate aspect ratios, boundary edge conditions and load positions. The non-uniform stresses may also be caused due to the supports on the edges. The analysis presented determines the initial stresses all over the region considering the pre-buckling stress state for different kinds of loading and edge conditions. In the structural modeling, the plate and the stiffeners are treated as separate elements where the compatibility between these two types of elements is maintained. The vibration characteristics are discussed and the results are compared with those available in the literature and some interesting new results are obtained.

• Coupled systems mechanics
• /
• 제12권1호
• /
• pp.83-102
• /
• 2023

First introduced in 2016, the dynamic foundation model is an interesting topic in which the foundation is described close to reality by taking into account the influence of the foundation mass in the calculation of oscillation and is an important parameter that should be considered. In this paper, a follow-up investigation is conducted with the object of the Mindlin plate on a nonlinear dynamic foundation under moving loads. The base model includes nonlinear elastic springs, linear Pasternak parameters, viscous damping, and foundation mass. The problem is formulated by the finite element analysis and solved by the Newmark-β method. The displacement results at the center of the plate are analyzed and discussed with the change of various parameters including the nonlinear stiffness, the foundation mass, and the load velocity. The dynamic response of the plate sufficiently depends on the foundation mass.

• Journal of Chest Surgery
• /
• 제49권3호
• /
• pp.221-223
• /
• 2016

A 22-year-old man was hospitalized with a sternoclavicular joint (SCJ) dislocation caused by a traffic accident. Surgical reduction and fixation of the SCJ were performed using a T-plate. SCJ dislocation is rare, accounting for less than 1% of all dislocations, and is usually treated conservatively, although severe cases may require surgery. Surgery typically involves joint reduction and fixation using an autologous tendon graft, but this has disadvantages such as the requirement for additional surgery to obtain autologous tissue and an extended operative time. To overcome these issues, here, we performed a simple SCJ reduction and fixation using a T-plate and achieved good results.

• Journal of Welding and Joining
• /
• 제7권4호
• /
• pp.22-29
• /
• 1989

In this paper weld distortion both in butt and fillet welds by flux cored arc welding has been investigated by changing welding parameters such as heat input and plate thickness, and the weld distortion was expressed as a function of welding parameters adopting the inherent strain theory as proposed by Watanabe and Satoh in 1961. As results of the research it is proposed that transverse shrinkage in root pass butt welds in proportional to ln[(Q/t_-tan.theta.] where Q is heat input(cal/mm), t is plate thickness(mm), and 2.theta. is groove angle(degree), and angular distortion .phi.(radian) in one pass of fillet welds has the following relationship: .phi..var.(Q/ $t^{1.5}$)$^{3}$exp[-(Q/ $t^{1.5}$ )$^{2}$3/] These equations provide us with basic tools to predict the amount of weld distortion in welded structures.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제24권3호
• /
• pp.293-303
• /
• 2020

The present work aims to analyzed the transient thermoelastic stress analysis of a thin circular plate with uniform internal heat generation. Initially, the plate is characterized by a parabolic temperature distribution along the z-direction given by T = T₀(r, z) and perfectly insulated at the ends z = 0 and z = h. For times t > 0, the surface r = a is subjected to convection heat transfer with convection coefficient h_c and fluid temperature T_∞. The integral transform method used to obtain the analytical solution for temperature, displacement, and thermal stresses. The associated thermoelastic field is analyzed by making use of the temperature and thermoelastic displacement potential function. Numerical results are carried out with the help of computational software PTC Mathcad Prime-3.1 and shown in figures.

• 한국강구조학회 논문집
• /
• 제17권5호통권78호
• /
• pp.581-591
• /
• 2005

본 논문의 목적은 지관이 종방향 플레이트인 냉간성형 각형강관 T형 접합부의 최대내력 평가를 통하여 설계내력식을 제안하는 것이다. 이러한 T형 접합부의 형상은 지관에 플레이트를 이용하여 각형강관 주관면에 길이방향으로 용접하는 형상이고, 지관 플레이트를 갖는 각형강관 T형 접합부 실험결과 중에서 주관 플랜지 휨파괴가 지배하는 접합부만을 대상으로 하였다. $16.7{\leq}2{\gamma}(B/T){\leq}31.3$ 이고 $0.20{\leq}{\beta}(b1/B){\leq}0.75$ 범위의 지관 플레이트를 갖는 T형 접합부에 대하여, 접합부의 내력은 강도보다는 사용성이 지배하는 나타나 최대내력을 주관폭(B)의 1.5 P1%B로 정의하였다. 기본 접합부 형상에 대해 제안된 항복선모델을 참조하여 지관 플레이트를 갖는 접합부 형상에 대한 새로운 수정된 항복선 모델을 제안하였다. 최종적으로 유한요소해석과 항복선 해석에 근거한 제안 설계내력식과 실험결과를 비교하여 타당성을 검증하였다.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.141-146
• /
• 2012

Aluminum alloys have been used with various thicknesses suitable for light weight of structure. It is known that the thickness effect of material is an important factor affecting fatigue crack propagation under constant fatigue stress condition. In this work, we presented the behavior of fatigue crack propagation in thin plate compared to thick plate Al 2024-T3 alloy with referred thickness effect in a correlative equation determined by the shape factor and the loading factor. We chose two factors that are used in the correlative equation with considering that the experiments were carried out under a constant fatigue stress condition. The thickness ratio of thin plate compared to thick plate and the equivalent effective stress intensity factor ratio depending on thickness were chosen as shape and loading factors. A correlative equation is utilized to determine the equivalent effective stress intensity factor range of thin plate and identify the degree of increasing phenomenon of fatigue life in thin plate compared to thick plate.

• 대한기계학회논문집A
• /
• 제28권4호
• /
• pp.352-361
• /
• 2004

One important element of the Leak-Before-Break analysis of nuclear piping is how to determine relevant fracture toughness (or the J-resistance curve) for nonlinear fracture mechanics analysis. The practice to use fracture toughness from a standard C(T) specimen is known to often give conservative estimates of toughness. To improve the accuracy, this paper proposes a new method to determine fracture toughness using a nonstandard testing specimen, curved wide-plate in tension. To show validity of the proposed curved wide-plate test, the J-resistance curve from the full-scale pipe test is compared with that from the curved wide-plate test and that from the C(T) specimen. It is shown that the J-resistance curve form the curved wide-plate tension test is similar to, but that from the C(T) specimen is lower than, the J-resistance curve from the full-scale pipe test. Further validation is performed by investigating crack-tip constraint conditions via detailed 3-D FE analyses, which shows that the crack-tip constraint condition in the curved wide-plate tension specimen is indeed similar to that in the full-scale pipe under bending.