• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1276-1282
• /
• 2003

The SMT(Surface Mount Type) ferrite bead used to reduce the influx of power bus noise is modeled with parallel capacitor(C), series resistor(R) and series inductor(L). The simple equivalent circuit modeling doesn't agree with the measurement result. In this paper, we proposed the accurate equivalent circuit model of the ferrite bead at wide frequency range(50 MHz∼3 GHz) and analyzed the noise effect to the high speed IC(Integrate Circuit) with ferrite bead or not.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.305-307
• /
• 1996

Because most LIM is driven by inverter, input voltage is involved with the time harmonics. Therefore the equiLlQ/ent circuit for an inverter-fed LIM has to be modified to represent every harmonics present in supply voltage. This paper analyzes the characteristics and loss of LIM to construct the equivalent circuit for each time harmonics through the static test and theoretical analysis. To make an analysis of nonsinusoidal supply waveforms, it is developed the simulation program to calculate the RMS, peak value and THD for any waveforms expressing Fourier series.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.180-182
• /
• 1995

The equivalent circuit of SLIM is composed of the circuit parameters. They can be obtained from the electromagnetic theory. The accelerating characteristics of SLIM are the best efficiency when synchronous speed changed continuously. The paper outlines a method of acceleration for an accelerated field system in which it is desired to reduce the overall length to a minimum, assuming a limit on the amount of heat which can be generated in the secondary member. The paper then shows that a primary unit designed to give several discrete field speeds only, as opposed to one with continuous speed variation, is not significantly inferior in performance to the latter but is much easier to manufacture.

• Progress in Superconductivity and Cryogenics
• /
• v.23 no.4
• /
• pp.44-48
• /
• 2021

In order to obtain ultra-high resolution MRI images, research and development of 11 T or higher superconducting magnets have been actively conducted in the world, recently. The high-temperature superconductor (HTS), first discovered in 1986, was very limited in industrial application until mid-2010, despite its high critical current characteristics in the high magnetic field compared to the low-temperature superconductor. This is because HTS magnets were unable to operate stably due to the thermal damage when a quench occurred. With the introduction of no-insulation (NI) HTS magnet winding technology that does not burn electrically, it could be expected that the HTS magnets are dramatically reduced in weight, volume, and cost. In this paper, a 6 T-class NI HTS magnet for basic characteristic analysis was designed, and a distributed equivalent circuit model of the NI coils was configured to analyze the charging current characteristics caused by excitation current, and the charge delay phenomenon and loss were predicted through the development of a simulation model. Additionally, the critical current of the NI HTS magnets was estimated, considering the magnetic field, its angle and temperature with a given current. The loss due to charging delay characteristics was analyzed and the result was shown. It is meaningful to obtain detailed operation technology to secure a stable operation protocol for a 6T NI HTS magnet which is actually manufactured.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.113-118
• /
• 2010

In This Paper, at the PSPICE model is presented by Piezoelectric Transformer and CCFL and equivalent circuit of fluorescent light. Highly effective fluorescent light release for next generation is developed for 35W supremacy model three wave length T5 fluorescent lamps. Lighting a candle experiment of T5 fluorescent lamps is carried out by employing Piezoelectric Transformer power-factor improvement circuit and inverter. PLL method is used for supplying a correct frequency of Piezoelectric Transformer operating.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.598-604
• /
• 2011

A method of miniaturizing branch line coupler with connected coupled lines is presented. The quarter-wavelength transmission lines in the typical microstrip branch line coupler are replaced with the connected coupled lines with same characteristics of ones for compact size. The connected coupled line is analyzed by T-equivalent circuit and Z parameters based on the even-odd mode analysis. The proposed branch line couplers with connected coupled line are designed and fabricated on FR4 substrate at 2.4 GHz. The measured results show good agreement with theoretical prediction. And the experimental results show that the size of coupler is 37 precent smaller than conventional coupler. This minimized coupler is suitable for Butler Matrix as feeder for mobile communication beam forming antenna.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.215-219
• /
• 2001

The resonators made of piezoelectric crystals such as a quartz crystal are widely used. Their frequency-temperature characteristics are of primary importance for their applications to the frequency control devices. The characteristics estimation is useful for determining their design parameters. In the present paper, several types of resonators are numerically analyzed. The numerical solutions are made using 3-D Finite Element Modeling, and the results are compared with the theoretical values whenever they are available. To demonstrate the validity of the present numerical approach, the application is made to the analysis of the plates with some well-established cutting angles. For the resonator stable with temperature change, the cutting angle is important in which the temperature coefficient of the first order is chosen to be zero. The rotated Y-cut plates in thickness-shear mode are considered. The equivalent circuit representation is often used fur describing the characteristics at the electrical terminals which enables the circuit analysis including the effect of temperature change by using the circuit simulators. The equivalent circuit parameters are obtained by fitting the admittance-frequency curve from the finite element analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1686-1696
• /
• 2022

The impedance matching circuit design technique based on the phasor plot introduced in this paper is based on the impedance triangle of electric circuit. It is a technique that designs through the construction of a phasor figure using the values given to the matching circuit design. The design pattern is based on L-type, inverted L-type, T-type, and 𝜋-type, and unknown reactance elements are determined through phasor shapes. In this paper, using a design by phasor plot, we design several cases, such as the case where the input and output ports are pure resistance and have reactance. It was confirmed that the design value was verified by serial-parallel equivalent conversion to achieve matching. This design technique can immediately grasp the phase or size of input/output power, so it is expected to be applied mainly in a low frequency band due to rapid design change and application.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2407-2409
• /
• 2000

Chua's circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper, a transmitter and a receiver using two identical Chua's circuits are proposed and a equivalent T type wire secure communications are investigated. A secure communication method in which the desired information signal is synthesized with the chaos signal created by the Chua's circuit is proposed and information signal is demodulated also using the Chua's circuit. The proposed method is synthesizing the desired information with the chaos circuit by adding the information signal to the chaos signal in the wire transmission system.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.809-812
• /
• 2005

In this work, a new method for extracting substrate parameters of RF MOSFETs based on 3-port measurement is presented using device simulation. A T-type substrate resistance network is used. 3-port Y-parameter analyses were performed on the equivalent circuit of RF MOSFETs. All the components in the RF MOSFETs when the device is turned off were extracted directly from the 3-port device simulation data. The small-signal output admittance $Y_{22}$ can be well modeled up to 40 GHz. From the 3-port simulation and modeling results, it was verified that the proposed equivalent circuit and parameter extraction method was more accurate than the single substrate resistance model.