• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.4
• /
• pp.430-438
• /
• 2007

In the current RFID (Radio Frequency IDentification) middleware systems based on the EPCglobal standard, the tag data received by multiple readers are processed sequentially in FIFO (First In First Out) order. Considering the priority of RFID reader makes the RFID system more flexible and improve the data transaction throughput in the service environment where important tag data with high priority for a specific reader. In this study, we propose a new RFID middleware system architecture supporting priority service with the Buffer Management Component. Our proposals are compliant with the EPCglobal ALE (Application Level Events) standard interface for middleware systems and their clients. To verify the efficiency of this proposed system, simulation is used for evaluation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.360-363
• /
• 1995

In this paper, we describe the composition of frequency response bands based on experimental data of plants (controlled systems) with uncertainty and nonlinearity, and the robust stability evaluation of feedback control systems. Analysis and design of control systems using the upper and lower bounds of such experimental data would be effective as a practicable method which is not heavily dependent upon mathematical models such as the transfer function. First, we present a method to composite gain characteristic bands of frequency response of cascade connected plants with uncertainty and a recurrent inequality for the composition. Next, evaluation methods of the robust stability of multi-loop control systems obtained through feedback from the output terminals and multi-loop control systems obtained through feedback into the input terminals are described. In actual control systems, experimental data of frequency responses often depends on the amplitude of input. Therefore, we present the evaluation method of the nominal value and the width of the frequency response band in such a case, and finally give numerical examples based on virtual experimental data.

• Journal of the Korean Society of Systems Engineering
• /
• v.20 no.spc1
• /
• pp.97-107
• /
• 2024

Efforts to respond to climate change are being made in various ways around the world, and in the energy field, continuous research and pilot projects are underway through new and renewable energy, efficient power grid management, and power grid services. Systems are in place to realize these efforts, and the systems created allow for better effectiveness. When implementing a system, systems engineering methodology helps design a more systematic system and can provide verification accuracy and uniformity through intuitive connectivity. In this paper, the original requirements of the power grid stabilization system and the architecture of the system's essential constraints are constructed as a conceptual model and the boundaries and flows between components are defined. By utilizing distributed resources such as EV(Electric Vehicle) and ESS(Energy Storage System) in the power service platform system, we plan to design and build a next-generation power service system that can participate in the power stabilization market and implement a system necessary to respond to climate change in the future.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.5
• /
• pp.241-249
• /
• 2015

Phase-locked-loops (PLL) have been employed in high-speed data transmission systems like wireless transceivers, disk read/write channels and high-speed interfaces. The majority of the researchers use a charge pump (CP) to obtain high performance from PLLs. This paper presents a review of various CMOS CP schemes that have been implemented for PLLs and the relationship between the CP parameters with PLL performance. The CP architecture is evaluated by its current matching, charge sharing, voltage output range, linearity and power consumption characteristics. This review shows that the CP has significant impact on the quality performance of CP PLLs.

• Ocean Systems Engineering
• /
• v.7 no.3
• /
• pp.247-273
• /
• 2017

Many different engagement situations require naval ships to achieve some level of effectiveness. The performance of the naval ships is very important for such effectiveness. There have been many studies that analyze the effectiveness and the performance. The former are largely related to engagement level simulations, while the latter are largely related to engineering level simulations. However, there have been few studies that consider both the engagement level and the engineering level at the same time. Therefore, this study presents three case studies using engagement simulation of the engineering level to check the performance of the related parameters. First, detection performance simulations are carried out by changing the specifications of the passive sonars of a submarine in different scenarios. Maneuvering performance simulations are carried out by changing the specification of the hydroplanes of a submarine in different scenarios. Lastly, in order to check whether or not our forces would succeed in attacking enemy forces, we perform an engagement simulation with various naval ship models that consist of several engineering level models, such as command systems, weapon systems, detection systems, and maneuver systems. As a result, the performance according to the specifications of the naval ships and weapons is evaluated.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.69-75
• /
• 2001

Systems engineering has been utilized in system development primarily for large-scale projects or commercial large-scale systems during the last several decades. We can understand why it would be useful to apply systems engineering to the development of a relatively small system. However, it is difficult to effectively carry out a project due to the complexity in applying the methods of systems engineering. To apply systems engineering to the development of a small system, the system engineering processes should be tailored. We established a requirements driven system design process(RDSDP) that can effectively carry out the system design far a small system. RDSDP is a system design process that treats all the requirements thoroughly and effectively. This is applied by the designer according to a standardized and systematized process during the first phase in design, in which system specifications are made. By using RDSDP, we can affect a reduction of the number of redesign phases in the process of the system design, shorten the period for to make specification, which will then cause the system to succeed in the actual application.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.2
• /
• pp.41-48
• /
• 2018

This paper describes the systems engineering development process for the Departure from Nucleate Boiling Ratio (DNBR) algorithm using FPGA. Current Core Protection Calculator System (CPCS) requirement and DNBR logic are analyzed in the reverse engineering phase and the new FPGA based DNBR algorithm is designed in the re-engineering phase. FPGA based DNBR algorithm is developed by VHSIC Hardware Description Language (VHDL) in the implementation phase and VHDL DNBR software is verified in the software Verification & Validation phase. Test cases are developed to perform the software module test for VHDL software modules. The APR 1400 simulator is used to collect the inputs data in 100%, 75%, and 50% reactor power condition. Test input signals are injected to the software modules following test case tables and output signals are compared with the expected test value. Minimum DNBR value from developed DNBR algorithm is validated by KEPCO E&C CPCS development facility. This paper summarizes the process to develop the FPGA-based DNBR calculation algorithm using systems engineering approach.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.5
• /
• pp.547-558
• /
• 2007

This paper proposes a simpler solution to the stabilization problem of a special class of nonlinear underactuated mechanical systems which includes widely studied benchmark systems like Inertia Wheel Pendulum, TORA and Acrobot. Complex internal dynamics and lack of exact feedback linearizibility of these systems makes design of control law a challenging task. Stabilization of these systems has been achieved using Energy Shaping and damping injection and Backstepping technique. Former results in hybrid or switching architectures that make stability analysis complicated whereas use of backstepping some times requires closed form explicit solutions of highly nonlinear equations resulting from partial feedback linearization. It also exhibits the phenomenon of explosions of terms resulting in a highly complicated control law. Exploiting recently introduced Dynamic Surface Control technique and using control Lyapunov function method, a novel nonlinear controller design is presented as a solution to these problems. The stability of the closed loop system is analyzed by exploiting its two-time scale nature and applying concepts from Singular Perturbation Theory. The design procedure is shown to be simpler and more intuitive than existing designs. Design has been applied to important benchmark systems belonging to the class demonstrating controller design simplicity. Advantages over conventional Energy Shaping and Backstepping controllers are analyzed theoretically and performance is verified using numerical simulations.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.41-53
• /
• 2011

Objective: The purpose of this paper is to introduce new research trends of human error and accident modeling and to suggest future promising research directions in those areas. Background: Various methods and techniques have been developed to understand the nature of human errors, to classify them, to analyze their causes, to prevent their negative effects, and to use their concepts during design process. However, it has been reported that they are impractical and ineffective for modern complex systems, and new research approaches are needed to secure the safety of those systems. Method: Six different perspectives to study human error and system safety are explained, and then seven recent research trends are introduced in relation to the six perspectives. The implications of the new research trends and viable research directions based on them are discussed from a cognitive systems engineering point of view. Results: Traditional methods for analyzing human errors and identifying causes of accidents have critical limitations in complex systems, and recent research trends seem to provide some insights and clues for overcoming them. Conclusion: Recent research trends of human error and accident modeling emphasize different concepts and viewpoints, which include systems thinking, sociotechnical perspective, ecological modelling, system resilience, and safety culture. Application: The research topics explained in this paper will help researchers to establish future research programmes.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2016.09a
• /
• pp.41-43
• /
• 2016