• 한국통신학회논문지
• /
• 제21권7호
• /
• pp.1716-1725
• /
• 1996

In this paper, the huffman decoder which is a part of the decoder in JPEG standard format is designed by using a new Ternary CAM. First, the 256 word * 16 bit-size new bit-word all parallel Ternary CAM system is designed and verified using SPICE and CADENCE Verilog-XL, and then the verified novel Ternary CAM is applied to the new huffman decoder architecture of JPEG. So the performnce of the designed CAM cell and it's block is verified. The new Ternary CAM has various applications because it has search data mask and storing data mask function, which enable bit-wise search and don't care state storing. When the CAM is used for huffman look-up table in huffman decoder, the CAM is partitioned according to the decoding symbol frequency. The scheme of partitioning CAM for huffman table overcomes the drawbacks of all-parallel CAM with much power and load. So operation speed and power consumption are improved.

• 제어로봇시스템학회논문지
• /
• 제6권7호
• /
• pp.594-601
• /
• 2000

EIA-709.1 Control Network Protocol is the basic protocol of LonWorks systems that is emerg-ing as a fieldbus device. In this paper the protocol is implemented by using VHDL with FPGA and C program on an Intel 8051 processor. The protocol from the physical layer to the network layer of EIA-709.1 is im-plemented in a hardware level,. So it decreases the load of the CPU for implementing the protocol. We verify the commercial feasibility of the hardware through the communication test with Neuron Chip. based on EIA-709.1 protocol which is used in industrial fields. The developed protocol based on FPGA becomes one of IP can be applicable to various industrial field because it is implemented by VHDL.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3067-3069
• /
• 1999

In this paper, A bit processor for controlling sequence logic was implemented, using a FPGA. This processor consists of program memory interface. I/O interface, parts for instruction fetch and decode, registers, ALU, program counter and etc. This FPGA is able to execute sequence instruction during program fetch cycle, because of divided bus system, program bus and data bus. Also this bit processor has instructions set that 16bit or 32bit fixed width, so instruction decoding time and data memory interface time was reduced. This FPGA was synthesized by pASIC 2 SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package. Finally, the benchmark was performed to prove that Our FPGA has better performance than DSP(TMS320C32-40MHz) for the sequence logic control of PLC.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.281-282
• /
• 2014

본 논문은 FPGA 기반의 DSC-PLL(Delayed Signal Cancellation - Phase Locked Loop)을 설계하고, 왜곡된 3상전압 조건에서 위상추종결과를 비교실험 하였다. FPGA 구현 알고리즘은 Matlab/Simulink와 연동된 System Generator를 이용하여 DSC-PLL 모델을 설계하고, Verilog HDL 코드로 변환 하였다. 불평형 및 고조파를 포함한 왜곡된 3상 전압 조건에서 FPGA에 구현된 DSC-PLL과 SRF-PLL (Synchronous Reference Frame - Phase Locked Loop)의 d-q축 고조파 감쇠특성 및 위상추종능력을 실험을 통해 비교하였다. DSC-PLL은 약 5.44ms 이내에 d-q축 고조파 성분을 제거함으로써 정상분 기본파 전압의 위상을 빠르게 추종하는 것을 검증하였다.

• 대한임베디드공학회논문지
• /
• 제6권2호
• /
• pp.100-107
• /
• 2011

As the use of mobile multimedia devices is increasing in the recent year, the needs for high-performance multimedia processors are increasing. In this regard, we propose a SIMD (Single Instruction Multiple Data) based parallel processor that supports high-performance multimedia applications with low energy consumption. The proposed parallel processor consists of 16 processing elements(PEs) and operates on a 3-stage pipelining. Experimental results for the JPEG encoding algorithm indicate that the proposed parallel processor outperforms conventional parallel processors in terms of performance and energy efficiency. In addition, the proposed parallel processor architecture was developed and verified with verilog HDL and a FPGA prototype system.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2000년도 하계종합학술대회논문집
• /
• pp.265-268
• /
• 2000

In this paper, we propose an algorithm, an optimized architecture, and an implementation for an improved performance of image downscaler. The proposed downscaler uses two-dimensional digital filters for horizontal and vertical scalings, respectively. It also improves scaling precisions and decreases the loss of data, compared with the 1/32 scaler 〔1〕. In order to achieve the optimization, the digital filters are implemented by the multiplexer -adder type scheme 〔2〕. The scaler is designed by using the Verilog-HDL. It is synthesized into gates by using the Samsung 0.35 um STD90 TLM library.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 추계학술발표대회
• /
• pp.56-58
• /
• 2011

원자력 발전소의 오작동이나 사고는 인명이나 재산상의 큰 피해를 초래하므로 엄격한 안전 기준을 적용하고 있다. 따라서 원자력 발전소의 안전성과 관련된 원전용 제어기는 높은 수준의 신뢰도와 안전도가 요구된다. 이를 위해 디지털 방식의 제어기에 PLC 방식의 제어기와 PLD 방식의 제어기를 사용하여 다양성을 얻고 있다. 본 논문에서는 PLD 방식의 원전용 트립제어기의 Functional Verification을 위하여 RTL 수준의 설계에 대한 Functional Coverage 분석을 사용하였다. 테스트벤치는 System Verilog에서 제공되는 클래스에 기반한 구조적 테스트벤치를 작성하여 사용하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권12호
• /
• pp.1554-1563
• /
• 1999

This paper presents the design of high speed processor for a sequence logic control using field programmable gate array(FPGA). The sequence logic controller is widely used for automating a variety of industrial plants. The FPGA designed by VHDL consists of program and data memory interface block, input and output block, instruction fetch and decoder block, register and ALU block, program counter block, debug control block respectively. Dedicated clock inputs in the FPGA were used for high speed execution, and also the program memory was separated from the data memory for high speed execution of the sequence instructions at 40 MHz clock. Therefore it was possible that sequence instructions could be operated at the same time during the instruction fetch cycle. In order to reduce the instruction decoding time and the interface time of the data memory interface, an instruction code size was implemented by 16 bits or 32 bits respectively. And the real time debug operation was implemented for easy debugging the designed processor. This FPGA was synthesized by pASIC 2 SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to sequence control system with inputs and outputs of 256 points. The designed processor for the sequence logic was compared with the control system using the DSP(TM320C32-40MHz) and conventional PLC system. The designed processor for the sequence logic showed good performance.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 한국컴퓨터종합학술대회 논문집 Vol.33 No.1 (A)
• /
• pp.226-228
• /
• 2006

In this paper we describe a simulation and development framework for designing mobile 3D graphics architectures. We are developing a simple and flexible simulation and verification environment (SVE) that uses gITrace's ability to intercept and redirect an OpenGL/ES streams. In combination wlth gITrace to trace OpenGL/ES commands, the SVE simulates the behavior of mobile 3D graphics pipeline during playback of traces, and then produces the second geometry trace that can be used as a test vector for the Verilog/HDL RT-level model. By comparing the frame-by-frame results, we can conduct architectural verification. To demonstrate the functionality of the SVE, we show the implementation of the verified mobile 3D architecture on a FPGA board. For this, we also present an application development environment (ADE) includes a mobile graphics API and a device driver interface (DDI). The proposed two software environments, the SVE and the ADE could be used fer developing and testing mobile applications, architectural study and speculative hardware designs.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.71-76
• /
• 2021

Digital decimation filters are used in various digital signal processing systems using ADCs, including digital communication systems and sensor network systems. When the sampling rate of digital data is reduced, aliasing occurs. So, an anti-aliasing filter is necessary to suppress aliasing before down-sampling the data. Since the anti-aliasing filter has to have a sharp transition band between the passband and the stopband, the order of the filter is very high. However, as the order of the filter increases, the complexity and area of the filter increase, and more power is consumed. Therefore, in this paper, we propose two types of decimation filters, focusing on reducing the area of the hardware. In both cases, the complexity of the circuit is reduced by applying the required down-sampling rate in two times instead of at once. In addition, CIC decimation filters without a multiplier are used as the decimation filter of the first stage. The second stage is implemented using a CIC filter and a down sampler with an anti-aliasing filter, respectively. It is designed with Verilog-HDL and its function and implementation are validated using ModelSim and Quartus, respectively.