• Journal of Korean Vacuum Science & Technology
• /
• 제4권1호
• /
• pp.18-22
• /
• 2000

For the enhancement of the nucleation density of the diamond film, we introduced the cyclic process. The cyclic process was carried out by the on/off control of CH$_4$ flow rate for a relatively short time (10 min), compared with the total reaction time (6 h). Prior to depositing the diamond film, we made the pretreated glass substrate via the unidirectional scratch using ∼l $\mu\textrm{m}$ size diamond powders. Diamond films were deposited on the pretreated glass substrate in a microwave plasma enhanced chemical vapor deposition (MPECVD) system. We observed the enhancement of the nucleation density of the diamond films caused by the cyclic process. Detailed surface morphologies of the substrate were investigated after the cyclic process. Based on these results, we discussed the cause for the enhancement of the nucleation density on the pretreated glass substrate by the cyclic process.

• 제어로봇시스템학회논문지
• /
• 제14권4호
• /
• pp.327-331
• /
• 2008

An in-line wet etch/cleaning system was established for the research and development in wet etch process as a formation of electrode such as metal or transparent conductive oxide layer. A reverse moving system was equipped in the in-line wet etch/cleaning system for the alternating motion of glass substrate in a wet etch bath of the system. Therefore, it was possible for the glass substrate to be moved back and forth and it was possible to reduce the size of the system by using the reversing moving system. For the effect of the alternating motion of substrate on the etch rate in the in-line wet etch bath, indium tin oxide(ITO) patterns were obtained through wet etch process in the in-line system in which the substrate was moved back and forth. From the CD(critical dimension) skews resulted from the ADI CD and ACI CD of the ITO patterns, it was concluded that the alternating motion of glass substrate are possible to be applied to the mass production of wet etch process.

• 한국태양에너지학회 논문집
• /
• 제38권5호
• /
• pp.37-47
• /
• 2018

The heating performance of a solar thermal seasonal storage system applied to a glass greenhouse was analyzed numerically. For this study, the gardening 16th zucchini greenhouse of Jeollanam-do agricultural research & extension services was selected. And, the heating load of the glass greenhouse selected was 576 GJ. BTES (Borehole Thermal Energy Storage) was considered as a seasonal storage, which is relatively economical. The TRNSYS was used to predict and analyze the dynamic performance of the solar thermal system. Numerical simulation was performed by modeling the solar thermal seasonal storage system consisting of flat plate solar collector, BTES system, short-term storage tank, boiler, heat exchanger, pump, controller. As a result of the analysis, the energy of 928 GJ from the flat plate solar collector was stored into BTES system and 393 GJ of energy from BTES system was extracted during heating period, so that it was confirmed that the thermal efficiency of BTES system was 42% in 5th year. Also since the heat supplied from the auxiliary boiler was 87 GJ in 5th year, the total annual heating demand was confirmed to be mostly satisfied by the proposed system.

• 한국광학회지
• /
• 제33권6호
• /
• pp.287-294
• /
• 2022

본 연구에서는 중적외선용 줌 광학계를 비열화에 유리한 소재 조합으로 구성하기 위해 비열화 유리 지도를 이용한 반복적인 설계 방법을 제시한다. 일반적으로 중적외선용 유리 소재는 가시광선용 소재에 비해 온도변화에 매우 민감하다. 또한 줌 광학계는 이동군이 존재하여 온도 변화에 따른 성능 보상이 어느 정도 가능하지만, 광학 렌즈에 적절한 소재가 배치되지 않으면 온도에 따른 이동군의 보상량이 크게 발생하여 비열화 설계 시 어려움이 발생한다. 이러한 문제점을 해결하기 위해 비열화 유리 지도상에서 수차 보정을 위한 값을 분석하여 비열화에 유리한 소재로 중적외선용 줌 광학계를 구성하고, 초점거리 2배 확장기를 부착하여도 온도 변화에 안정적인 확장형 줌 광학계를 설계하였다.

• 보존과학회지
• /
• 제28권3호
• /
• pp.205-216
• /
• 2012

아산 밖지므레 유적 마한 분묘에서 출토된 유리 65점은 포타쉬유리군이 13점, 소다유리군이 52점으로 소다유리군이 우세하게 나타났다. 색상별로 세분하면, 감청색 유리는 포타쉬유리군과 소다유리군이 공반되는 반면 자색 유리는 포타쉬유리군이고 적색, 벽색, 녹색, 금박유리는 소다유리군으로 나타났다. 감청색 유리는 안정제의 함량이 낮은 LCA계이고 이중에 소다유리는 MgO와 $K_2O$ 함량이 낮은 LMK형으로 천연탄산소다가 원료로 사용된 것으로 판단된다. 적색 유리는 균질한 유리가 LCA-B계/HMK형이고 불균질한 유리가 HCLA계/LMK형으로 각각 해양 식물 재와 천연탄산소다가 사용되었을 가능성이 있다. 벽색과 녹색 유리는 환옥이 LCA-A계/LMHK형이고 연주옥이 LCA-B계/HMK형으로 형태에 따라 차이를 보인다. 금박구슬은 19.9~22.6K의 순도를 갖는 금박과 HCLA계/LMK형의 소다유리로 제작되었다. 즉, 아산 밖지므레 유적 유리구슬 대부분은 백제시대 타 유적에서 확인되는 유리 조성과 유사성이 높은 편이나 벽색 및 녹색 연주옥과 일부 적색 환옥은 다른 화학 조성을 보이므로 원료에 차이가 있음을 알 수 있다. 이와 같은 특성은 고대유리의 교역 체계 이해를 위한 중요한 단서를 제공할 것으로 기대된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1514-1516
• /
• 1999

This paper covers our efforts to improve the low carrier mobility and light instability of hydrogenated amorphous silicon (a-Si:H) films with microcrystalline silicon $({\mu}c-Si)$ films. We successfully prepared ${\mu}c-Si$ films on $CaF_2$/glass substrate by decomposition of $SiH_4$ in RPCVD system. The $CaF_2$ films on glass served as a seed layer for ${\mu}c-Si$ film growth. The XRD analysis on $CaF_2$/glass illustrated a (111) preferred $CaF_2$ grains with the lattice mismatch less than 5 % of Si. We achieved ${\mu}c-Si$ films with a crystalline volume fraction of 61 %, (111) and (220) crystal orientations. grain size of $706\AA$, activation energy of 0.49 eV, and Photo/dark conductivity ratio of 124. By using a $CaF_2$/glass structure. we were able to achieve an improved ${\mu}c-Si$ films at a low substrate temperature of $300^{\circ}C$.

• 대한치과보철학회지
• /
• 제40권5호
• /
• pp.429-440
• /
• 2002

Current dental restorations present a relatively weak resistance to fracture. Owing to their unique mechanical properties, fibre-reinforced polymers are now being considered. Unidirectional or woven continuous fibres, made of glass, polyethylene, carbon or Kevlar, have been evaluated. This study focused on the use of glass fibre knitted fabrics to reinforce acrylate resins, in order to investigate the possibility to construct single crowns as well as three unit bridges. Some points affecting the final composite system were tested ; 1) static strength, with focus on the stress transfer under a occlusal contact point ; 2) modelling of a three nit bridge ; 3) fatigue strength as a posterior three unit bridge material. The study demonstrated that knitted fabric reinforcements are showing an interesting compromise between stiffness, static strength for single crown. For three unit bridge applications in the posterior arch, however knitted glass fabric reinforcements were not strong enough in fatigue An additional reinforcement in the posterior arch fixed partial denture design was recommended.

• Applied Microscopy
• /
• 제46권4호
• /
• pp.244-252
• /
• 2016

This paper describes a new design of carbon nanotube tip. $Nanocly^{TM}$ NC 7000 Thin Multiwall Carbon Nanotubes of carbon purity (90%) and average diameter tube 9.5 nm with a high aspect-ratio (>150) were used. These tips were manufactured by employing a drawing technique using a glass puller. The glass microemitters with internal carbon nanotubes show a switch-on effect to a high current level (1 to $20{\mu}A$). A field electron microscope with a tip (cathode)-screen (anode) separation at ~10 mm was used to characterize the electron emitters. The system was evacuated down to a base pressure of ${\sim}10^{-9}$ mbar when baked at up to ${\sim}200^{\circ}C$ overnight. This allowed measurements of typical Field Electron Emission characteristics; namely the current-voltage (I-V) characteristics and the emission images on a conductive phosphorus screen (the anode). Fowler-Nordheim plots of the current-voltage characteristics show current switch-on for each of these emitters.

• 대한기계학회논문집A
• /
• 제38권9호
• /
• pp.967-972
• /
• 2014

우수한 광투과성 및 경도를 지닌 유리는 바이오, 전자, 광학 등의 분야에서 널리 활용되고 있다. 하지만, 유리는 경도가 높고 깨지기 쉬워 일반적으로 특수가공법을 이용하여 가공이 이루어진다. 그 중 레이저는 공구가 불필요하며 가공 속도가 빠르다는 장점을 지니고 있지만 유리의 높은 광투과성 때문에 가공에 적용하기에는 많은 제약이 따른다. 이에 저출력의 나노초 펄스 레이저로 유리 가공을 하기 위하여 간접가공법인 레이저 습식 후면 식각공정을 활용하고자 한다. 기존의 연구들에서는 흡수율이 뛰어난 고가의 단파장 레이저 장비를 주로 사용하였으나 본 연구에서는 범용적인 근적외선 레이저 장비를 활용하여 유리 구조물 제작의 가능성을 실험하였다. 특히 깊은 구조물 제작시 발생하는 문제점을 확인하고 이를 해결하기 위해 초음파 부가 공정을 통한 미세 구조물 제작을 수행하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1072-1074
• /
• 1995

Zinc-Borosilicate is used as a side insulastor wall to make high breakdown voltage with one Field Limiting Ring in a p-n junction. It is known that surface charge can be yield at the interface of Zinc-Borosilicate Glass/Silicon system. When the glass is used as a side insulator wall, surface charge varied potential distribution and breakdown voltage improved more than 660V without using more FLR.