• Journal of Auto-vehicle Safety Association
• /
• v.8 no.3
• /
• pp.22-27
• /
• 2016

As a preliminary research to provide amendment for the engine performance test regulation of two-wheeled vehicles, the engine performance data are investigated in terms of maximum torque, rated power, and engine speed of motorcycles on sales in Korean market. Based on the engine performance database officially published to consumers, some forecasted problems are discussed when the maximum torque and the rated power are measured under the present test standards. EU and Korea regulations on engine performance test are carefully compared in terms of the accuracy of measurement devices, test procedures including data acquisition method, and allowable range of rated power measurement. Complementary items are discussed to eliminate ambiguities in the present regulation and to construct rational regulation system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.928-933
• /
• 1991

In this study, the authors developed a hydraulic motor performance test system which automatically accomplishes the procedure of basic performance test and represents the data obtained in the test as performance curves. The software is made as conversation style between a computer and a user, so even to novices it is very easy to use. The most important point of this study is to get desirable isoefficiency curves. As some defined number of data are obtained at actual test, additional data necessary for desirable isoefficiency curves are generated numerically by interpolation. Basis spline function is used to get more smooth representative performance curves.

• Earthquakes and Structures
• /
• v.17 no.4
• /
• pp.399-409
• /
• 2019

This paper presents the experimental investigations on the seismic performance of a peculiar steel-concrete vertical hybrid structural system referred to as steel truss-RC tubular column hybrid structure. It is typically applied as the supporting structural system to house air-cooled condensers in thermal power plants (TPPs). Firstly, pseudo-dynamic tests (PDTs) are performed on a scaled substructure to investigate the seismic performance of this hybrid structure under different hazard levels. The deformation performance, deterioration behavior and energy dissipation characteristics are analyzed. Then, a cyclic loading test is conducted after the final loading case of PDTs to verify the ultimate seismic resistant capacity of this hybrid structure. Finally, the failure mechanism is discussed through mechanical analysis based on the test results. The research results indicate that the steel truss-RC tubular column hybrid structure is an anti-seismic structural system with single-fortification line. RC tubular columns are the main energy dissipated components. The truss-to-column connections are the structural weak parts. In general, it has good ductile performance to satisfy the seismic design requirements in high-intensity earthquake regions.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.1-6
• /
• 2017

In this paper, we present a study concerning the design of a 400 N class side thruster for small ships. The side thrusters used in Korea are imported from abroad. The performance and durability of the imported products employed in Korea are not adequate, therefore the side thrusters which will be suitable for Korean domestic needs to be re-designed. The strength calculation of the side thruster was performed by KS standard. Strength calculation and design were made to meet design requirements. Structural analysis and safety factor analysis were carried out to confirm the validity of strength calculations and design. After manufacturing the bevel gear, a back lash test was conducted. We also conducted a no-load test, a rated load, and an overload test for a performance test and a durability test of the design while satisfying the design conditions.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.15 no.4
• /
• pp.147-155
• /
• 2007

Mobile air conditioning systems work under widely changing operating conditions. To understand the system behavior under such dynamic conditions, a test facility that can impose transient loads as well as conducting dynamic measurements is needed. To test mobile air conditioning systems including their dynamic performance under various drive cycle patterns without using full scale vehicles in a wind tunnel, a new test facility, called "dynamic simulator," is described. It can replicate real vehicle operating conditions by interacting with the system being tested based on the measured system performance and subsequently adjusting the air properties returning to the test system based on the results of a numerical cabin model. A new dynamic simulator has been designed, constructed, and verified for performing dynamic tests. It was successful in controlling the temperature and relative humidity of the air returning to the test unit within ${\pm}0.7^{\circ}C$ and ${\pm}4%$ of their respective intended values. The verification test under the New European Driving Cycle demonstrated that detailed transient behavior of the mobile air conditioning system could be measured by using this dynamic simulator.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1835-1840
• /
• 2010

The rolling stock have to be tested and evaluated on test line before entry into service. The test items consist of traction performance, braking performance and current collection performance, etc. This paper is a study of defining the test items considering the domestic safety law, IEC 61133 and describes how to establish a test measurement system. Also this paper presents how to conduct the traction performance test and test results.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1035-1040
• /
• 2011

In this paper we deal with a kinetic performance test system using hydraulic cylinder. It is possible to measure only current using the conventional electro-mechanical actuator when the bogie is in the process of the tilting. This makes impossible to measure the force acting on the tilting actuator. In order to overcome this problem a kinetic performance test system using hydraulic cylinder is proposed. The proposed system provide easy kinetic evaluation for the tilting mechanism and evaluation for the co-relation between load acting on the tilting actuator and the moving displacement(strock) of the tilting actuator.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.1 no.1
• /
• pp.65-81
• /
• 1998

Objective technology development has been carried out aiming performance improvement of the stabilized gun-pointing system for Type-4 tank. The full nonlinear simulation programs with gun bending modes and nonlinearities were developed to estimate, analyze and design the driving and stabilization system, and validated through the comparisons between simulations and test results of the existing Type-1 tank. The prototype is designed, fabricated, tested and evaluated on the test range as well as in the laboratory and followed by development and operational tests. The performance test results on stationary and on-the-move conditions are turned out to be superior to those of the advanced tanks developed in foreign countries.

• Journal of Ship and Ocean Technology
• /
• v.9 no.1
• /
• pp.1-10
• /
• 2005

The procedures of model test and performance prediction for the CRP-POD propulsion ships, are studied. At the CRP-POD system, which are highly applicable to ultra large container carriers, RPM ratio of two propellers is not fixed, unlike conventional CRP system, and hence the power of each propeller must be predicted respectively. In this paper, a CRP-POD system is designed for 10,000 TEU class ultra large container carriers, and the characteristics of the CRP-POD system are experimentally studied. Finally, based on this study, the procedure of powering performance evaluation for CRP-POD propulsion ships is suggested. However, further studies on quantitative correction of the present procedure are required.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.139-148
• /
• 2011

As the architecture of automotive software is complicated and LOC of software increases, there is an increasing demand for standard operating system. OSEK/VDX defines an industry standard for automotive operating system and middleware. This paper introduces an implementation of RTOS(OSCAR-OSEK) based on OSEK/VDX standard. For better speed of scheduling, we suggest a new method for ready queue implementation considering the characteristic of automotive application software. Also we introduce a method for improving the portability of RTOS on various MCUs. And, we show OSCAR-OSEK implementation and performance test results.