• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.23-30
• /
• 2012

In this paper, we suggested the integration between automatic enforcement system and UTIS(Urban Traffic Information System) base station. UTIS base station and automatic enforcement system are different in the height of installation and the type of communication network. UTIS base station is 25 meter high and communicate with center system by optical network. Whereas automatic enforcement system is 6.6 meter high and communicate with center system by rental network. For the purpose of suggesting the efficient method of integration, research was as in the following. We found that the number of integrated system was 1,628 through the present state of analysis and UTIS equipment was satisfied with the required specifications through field testing. Also we suggested the appropriate configuration of the integrated system and analyzed that the cost of the integrated system installment is 1/5 lower than that of the legacy system installment.

• Journal of the military operations research society of Korea
• /
• v.29 no.2
• /
• pp.131-147
• /
• 2003

The complexity of modern weapon systems using the intelligence technology demands that rapid and effective transition from force requirements to deployment and fielding. Thus this paper deals with the integration of development procedure, evolutionary acquisition, integrated test and evaluation, improvement of the requirements decision process, use of commercial products of high quality and low cost, specification deviation, and the effective use of dual use technology. In general, decision­makers, and military field users shall first consider the moving technology rapidly into use. This study is aimed to improve the defence acquisition management directive for timely force integration of weapon system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.10
• /
• pp.1081-1087
• /
• 2008

This paper describes limitations and solutions of the existing processor-monitoring concept for a military supersonics aircraft Flight Control Computer (FLCC) equipped with modern architecture processor to perform the system integration test. Safecritical FLCC integration test, which requires automatic test for thousands of test cases and real-time input/output test condition generation, depends on the processor-monitoring device called Processor Interface (PI). The PI, which relies upon on the FLCC processor's external address and data-bus data, has some limitations due to multi-fetching capability of the modern sophisticated military processors, like C6000's VLIW (Very-Long Instruction Word) architecture and PowerPC's Superscalar architecture. Several techniques for limitations were developed and proper monitoring approach was presented for modem processor-adopted FLCC system integration test.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.1
• /
• pp.61-64
• /
• 2001

Delta-integration vectors were constructed for the purpose of achieving homologous integration of the hirudin expression cassette into the chromosome of Saccharomyces cerevisiae. A double $\delta$ system truncated with the unnecessary bacterial genes, and consequently having a reduced insert size for integration, showed a four-fold increase in transformation efficiency at given DNA concentrations, and as a result, the constructed recombinant yeast strain had a 1.3-fold enhancement in hirudin expression level compared with a single $\delta$ system.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.10a
• /
• pp.182-185
• /
• 2005

To survive in rapidly changing business environment, the enterprise should adapt its business process to the changing environment. The system integration is an important issue to tackle this challenge. It is unavoidable direction that SOA (Service Oriented Architecture) is accepted as an upcoming IT standard to support flexible business processes and integration. In this paper, SOA is introduced, and the Web services and ESB (Enterprise Service Bus) ate also introduced as a foundation technology to implement SOA-enabled solutions. The pilot project, which is introduced in this paper, will be a good reference for future SOA implementation.

• Journal of the Korean Society of Systems Engineering
• /
• v.9 no.2
• /
• pp.69-82
• /
• 2013

US DoD operated JCIDS(Joint Capability Integration and Development System) for top down requirement generation. Although the JCIDS can be a good practice for the countries which are trying to shift from bottom up to top down requirement generation, it contains many processes related with review and approval. In this study we structured a joint capability integration and development process from the JCIDS eliminating the organization dependent review or approval process so that it can be applied to any organization with some modification. Furthermore we implemented the process in the computer aided systems engineering tool, Cradle, for convenient use of the process. The result of this study can provide a basic process for top down capability development, and an efficient why of doing each element of the process using CASE tool.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.3
• /
• pp.110-116
• /
• 2008

Operational strategy for inventory control in the distribution system has been given attention. If an individual enterprise implements the strategy, it is not easy to gain scale merits because of limited quantity or burden of inventory. In this study, we propose an operational strategy for inventory control that considers managerial integration of regional distribution centers (RDCs) and present a model of it. In a network of several RDCs, they could share inventory information and supply parts for others in case of an inventory shortage. And a numerical example of the network is illustrated, which compares two operational strategies, integration management of RDCs and individual management of them. The result shows total cost reduction in the strategy of integration management through the efficient inventory control of multi-echelon distribution.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.211-218
• /
• 2012

We analyzed the effect of inventory pooling on the system where multiple depot was used to replenish retailers and where inventories are kept only on the depots. Inventory pooling consists of inventory integration and inventory exchange. We used simulation for checking the cost saving effect of reducing the number of depot (Inventory Integration) for the case when inventories kept on every depots are commonly used for all retailers when certain depot have stock out for their retailer assigned to them (Inventory Exchange) with the constraint of service level. Simulation on wide range of parameter settings results show that cost saving effect from inventory integration diminishes when transportation cost between depot and retailers or stock out cost, or retailer number increases. The effect becomes stronger when the demands on retailers have bigger variance or average. Also the results show that the cost saving effect from inventory exchange becomes stronger on the same situation when inventory integration effect becomes stronger.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.33-45
• /
• 1998

The typical characteristic of PDM(Product Data Management) System seperates the databases to store the meta data and applications. Therefore, meta data contains the information for the location of file, user profiles, relationships between the files, and process. PDM utilizes these information efficiently and does file management, configuration management, and process management. In this view, the integration strategy of PDM is to merge data and process. In the view of architecture, the interface between data and application and the actions of each application execute seamlessly. This architecture is viewed as integrated data and process among enterprises and implemented with client/server technology in distributed process environment that interfaced with open object-oriented technology which is developed with business object in the object-oriented infrastructure. In this paper, we studied the definition, function, and scope of PDM and researched the core technologies to implement the PDM integration environment. We also researched the PDM utilization in distributed enterprise environment and implementation of PDM integration environment with this technical background.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.1
• /
• pp.48-53
• /
• 2000

The novel integration method with programmable high-pass filter is suggested in order to solve the problem of integration for stator flux estimation in a stator flux oriented direct vector controlled induction motor drive system. The dc offset in a pure integrator is eliminated using high-pass filter with fixed time constant, and then time constant of programmable high-pass filter is controlled with a inverter frequency for integration in a wide frequency range, considering phase lag and attenuation due to both the hardware low-pass filter and high-pass filter. The proposed method is verified with the experimental results implemented by 32-bit DSP.