• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.178-185
• /
• 2001

This paper describes the correlation between the interior noise and the trunk wall vibration. Using the vibro-acoustic reciprocity, effect of the trunk wall vibration on the compartment noise is investigated on a medium size car. In the low frequency range, vehicle interior noise is dominated by several acoustic modes of the passenger compartment and the vibration modes of the surrounding shell parts. Especially, vibration of the trunk wall radiates sound and it is transferred through holes on the package tray into the passenger compartment. This paper experimentally reveals that sound can be well produced at some particular vibration modes of the trunk lid and it strongly influences the compartment noise through package tray holes. Contributions of the trunk walls to the interior noise are estimated by measuring the acoustic-structural transfer function, based on the vibro-acoustical reciprocity theorem.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1714-1719
• /
• 2003

Antilock Brake System (ABS) is indispensable safety equipment for vehicles today. In order to develop new ABS ECU suitable for pneumatic brake system of a bus, a Hardware In-the-Loop Simulation (HILS) System was developed. In this HILS, the pneumatic brake system of a bus and antilock brake component were used as hardware. For the computer simulation, the 14-Degree of Freedom (DOF) bus dynamic model was constructed using the Matlab/Simulink software package. This model was compiled and downloaded in the simulation board, where the Power PC processor was used for real-time simulation. Additional commercial package, the ControlDesk was used to monitor the dynamic simulation results and physical signal values. This paper will focus on the procedure and results of evaluating the ECU in the HILS simulation. Two representative cases, wet basalt road and $split-{\mu}$ road, were used to simulate real road conditions. At each simulated road, the vehicle was driven and stopped under the help of the developed ECU. In each simulation, the dynamical behavior of the vehicle was monitored. After enough tests in the laboratory using HILS, the parameter-tuned ECU was equipped in a real bus, which was driven and stopped in the real test field in Korea. And finally, the experiment results of ABS equipped vehicle's dynamic behavior both in HILS test and in test fields were compared.

• East Asian mathematical journal
• /
• v.21 no.2
• /
• pp.249-260
• /
• 2005

Experimentation using computer plays an important part in education and research in graph theory. The purpose of this paper is to develop the CAS techniques for the hands-on approach in graph theory specifically on the topic of constructing the spanning tree. This paper discusses the advantages of CAS as the software system for doing graph theory and introduces the software solutions integrating multimedia user interface developed by the author, which extend the functionality of the existing CAS-based graph theory software package.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.95-103
• /
• 2008

Proposed induction-heated system is innovative system which applied special high-frequency power circuit technique for thermal converse technique and IH(Induction-Heating) magnetic induction heating generated from induction-heated metallic package that is for distillation unit. In this occurs not burning, so that the working environment can be improved. This electromagnetic induction heating technique is used high frequency inverter. By using high frequency inverter high frequency alternative current (HFAC) in the range of [kHz] can be made with conventional alternative current. In this contribution IGBT module is used for high frequency inverter. In this paper are discussed action analysis and characteristics analysis of 1.5[kW]-Class half-bridge resonant inverter system and resonant metallic package. In addition, by using this system, how two step heating superheated steam generator is developed and application of system are also discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.673-676
• /
• 2017

The Offshore drilling system of domestic drilling systems (drill rigs, drill ship) in Korea is dependent on full imports and the monopolistic situation of a few foreign large corporations is intensifying. In addition, most of domestic technology development tries to develop single product oriented products until now, but it is necessary to develop monitoring control system for package unit commercialization by approaching package development method. Therefore, we will develop a control monitoring system that can integrate the single equipment of the mud system developed previously.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.207-208
• /
• 2008

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.53-59
• /
• 2005

In this paper, we proposed the 2-dimensional inspection algorithm for micro-BGA(Ball Grid Array) device using a vision system. The reposed method uses the subpixel algorithm for high precision. The proposed algorithm preferentially extracts the package area of device in the input image. After the extraction of package area, each ball areas are extracted by ball search window method. The parameters for inspection are calculated for the extracted ball area. In the simulation results, we have the average error within 17[${\mu}m$].

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6419-6424
• /
• 2014

The use of the PMP (Protection Module Package) was proposed as a solution for the shorter battery lifetime. The PMP means that a protection circuit consists of a semiconductor single. In this study, basic research was carried out to select a suitable epoxy material of the EMC module through finite element analysis. First, the stress on the external force was compared by the flexural strength analysis. In the following thermal analysis, the temperature change of the EMC module and the internal part was compared using the calculated heating value. Finally, the filling ratio was compared with the injection of the melting epoxy in the EMC module.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.91-100
• /
• 2004

In this paper, we propose the method that analyzes the depth of object using 2 images in the disparity algorithm. It also presents the design and implementation of the proposed method for a real time processing. The proposed system uses the vertical strip structure for calculating similar pixel numbers for the processing and converts the depth of object into gray scale images in order to be displayed on various display devices. The hardware using the proposed method is operating with 30 frames/sec and verified by using the Altera APEX 20K1000EBC652-3. The proposed method is also Implemented into It by using the Hynix 0.35${\mu}{\textrm}{m}$ CB35 ASIC library and 256PQFP package.

• Archives of design research
• /
• v.17 no.3
• /
• pp.343-352
• /
• 2004

Under the production system of a free market economy, the modern consumers'goods that feature current trends reveal diverse aspects of the whole society and culture. This phenomenon is progressing at such a rapid speed that theories can barely keep up to explain it dearly. It is believed that the reason for the lag in academic theories is the formation of pluralistic values in human lifestyles due to the development of science and information communication. The pluralism of values in contemporary society is being studied in many academic fields, and the design among these fields often sees such a phenomenon as one of the post-modernism concepts, where post-modernism suggests a diversification and dismantling of modernism. In other words, the current design is closely watching products that are totally different from existing products, from complex and conceptual outcomes in the field of design to products that reflect various trends. Thus, it is true that package design, which proactively reflects current trends, freely traverses among specific domains of various fields that have been determined tacitly. It is also believed that other fields are also reflecting the same developments. Such a phenomenon is strikingly revealed with so-called 'fancy products', while other products 'parody' package design. This study sees the phenomenon as dismantling the border between product design and package design. The examined package design reflects the broader characteristics of the times, based on current concepts and meanings, after reviewing design examples.