• 정보처리학회논문지B
• /
• 제9B권2호
• /
• pp.245-254
• /
• 2002

머신비전을 이용한 IC 패키지 마킹검사 시스템은 입력영상으로부터 검사할 요소들의 위치를 식별하고, 추출된 요소들을 학습된 표준 패턴과 비교하여 마킹의 불량 여부를 판단한다. 본 논문에서는 검사 대상 IC 패키지의 위치 판별, 마킹문자 추출, 핀원딤플 검출과 같은 일련의 작업들에 적합한 적응적 다단계 이진화 방법과 마킹문자의 국소적인 오류검출은 물론 잡영에 강건한 정합단위의 동적 선택 방법을 제안한다. 제안하는 이진화 방법은 이진화 대상 영역과 명도 값의 범위를 제한하여 Otsu의 이진화 알고리즘을 적용함으로써 특정 응용에 적응적인 이진화가 가능하다. 정합단위의 동적 선택 방법은 문자추출 및 배치분석에 대한 결과에 따라 정합단위를 선택한다. 그러므로 문자추출 및 배치분석 과정에서 발생하는 예기치 못한 부적절한 상황에서도 가능한 범위내에서 최소의 정합단위를 선택할 수 있다. 제안된 방법을 구현하여 8종의 IC 패키지, 총 280개의 영상에 대하여 실험한 결과, IC 패키지와 핀원딤플의 검출율은 100%였으며, 마킹상태에 대한 판정은 98.8%의 정확도를 나타내어 제안된 방법이 효과적임을 확인할 수 있었다.

• 소음진동
• /
• 제4권3호
• /
• pp.327-335
• /
• 1994

In this paper, to identify the dynamic characteristics of antenna system, the antenna is divided into 4 components and those were analyzed with a conventional FEM package MSC/NASTRAN. Using a Component Mode Synthesis Method, dynamic characteristics of total system is also identified. The Coherence of each component to total system is evaluated by using strain and kinetic component to total system is evaluated by using strain and kinetic energy. The improving strategy of dynamic characteristics is suggested by changing mass and stiffness of large coherence components.

• 마이크로전자및패키징학회지
• /
• 제9권1호
• /
• pp.43-48
• /
• 2002

Semiconductor chip encapsulation process is employed to protect the chip and to achieve optimal performance of the chip. Expert decision-making to obtain the appropriate package design or process conditions with high yields and high productivity is quite difficult. In this paper, an expert system for semiconductor chip encapsulation has been constructed which combines a knowledge-based system with CAE software.

• 한국식생활문화학회지
• /
• 제22권2호
• /
• pp.167-175
• /
• 2007

This study was to investigate purchase of women for commercial kimchi. Survey was carried out by questionnaire method that is target on 322 female over 20 age in Seoul area. The results of the study was that the way they get kimchi of women answered that they make it by themselves(63.3%). The reason of purchasing is they do not have enough time to make it at their home(43.8%) and its good taste(56.8%) result in their purchase. In the degree of preference about package material, prefer polyethylene(39.6%). Also respondents prefer purchasing poggi kimchi(63.4%) among other different types of kimchi. The promotion facts of purchasing commercial kimchi shows a high score in cold chain system package and specific kimchi development.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.96-99
• /
• 2000

We presents a BGA(Ball Grid Array) package for RF circuit modules and extracted its electrical parameters. We constructed a BGA package of ITS(Intelligent Transportation System) RF module and examined electrical parameters with a HP5475A TDR(Time Domain Reflectometry) equipment and compared its electrical parasitic parameters with PCB RF circuits. With a BGA substrate of 3 $\times$ 3 input and output terminals, we have found that self capacitance of BGA solder ball is 68.6fF, self inductance 146pH, mutual capacitance 10.9fF and mutual inductance 16.9pH. S parameter measurement with a HP4396B Network Analyzer showed the resonance frequency of 1.55㎓ and the loss of 0.26dB. Thus, we may improve electrical performance when we use BGA package structures in the design of RF circuit modules.

• 한국정보통신학회논문지
• /
• 제19권12호
• /
• pp.2828-2835
• /
• 2015

본 논문에서는 다양한 다중화 모형과 논스톱 포워딩 기능이 네트워크 서비스의 가용도에 미치는 영향을 비교 분석한다. 다중화 모형 중 no redundancy, 2N redundancy, N-way redundancy, N-way active redundancy 모형에 대한 확률적 리워드 네트(Stochastic Reward Net, SRN) 모델을 설계하고, 각각의 모형에 대해 논스톱 포워딩 기능을 추가한 SRN 모델을 설계한다. 확률적 페트리 네트 패키지(Stochastic Petri Net Package, SPNP)를 활용하여 설계한 SRN 모델의 가용도를 구한다.

• 대한전자공학회논문지TC
• /
• 제39권11호
• /
• pp.40-46
• /
• 2002

본 논문에서는 CPW MMIC 실장시 발생되는 기생 공진 현상을 제거하기 위한 새로운 구조의 실리콘 MEMS 패키지를 제안하였다. 또한 세 가지 형태의 실리콘 칩 캐리어(gold-plated high resistivity, lightly doped, high resistivity) 상에 GaAs CPW 패턴을 제작하고 해석/측정함으로써, 제안된 패키지의 성능을 확인하였다. 해석 및 측정 결과 제안된 MEMS 패키지는 비저항이(resistivity) 15 ${\Omega}{\cdot}$㎝인 실리콘 캐리어(carrier)를 사용함으로써 기생 공진 현상을 효과적으로 억제시킬 수 있었다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제16권3호
• /
• pp.216-223
• /
• 2016

This paper proposes a new controller design method for a fork-type lifter (FTL) of a transportation mobile robot. The transportation robot needs to pick up a package from a stack on a storage shelf and move on by a planned path in a logistics center environment. The position of the storage shelf is recognized by reading a QR code on the floor, and using this position, the robot can move to reach the storage shelf and pick up the package. PID controllers and an adaptive controller are designed to control the velocity of two wheels and the position of the FTL. An adaptive controller for the lifter is designed to elevate up and down on a slideway to the correct height position of the package on the stack of the storage shelf. The simulation results show that the PID controllers can respond smoothly to the desired angular velocity and the adaptive controller can adapt quickly and correctly to the desired height.

• 산업경영시스템학회지
• /
• 제32권1호
• /
• pp.85-93
• /
• 2009

In this paper, the geometric design for the body of a 3"-PFA-lined plug valve is concerned, and body model which has less deformed PFA-resin after infection molding process is proposed. A CAE software is used to simulate the deformation due to heat in cooling. To reduce the deformation, some small shapes are added to PFA-resin surfaces related on wall of the valve housing. And thermal stress simulation with FEM methodology is followed after that. Also, the 3D-CAD package is used during the design processes. In this study, I tried to present the possibility to use the FEM analysis in the solid modeling process. So, the design engineer will be able to use analysis package effectively on his job within the limited range.

• 한국정밀공학회지
• /
• 제9권4호
• /
• pp.13-21
• /
• 1992

Standards concerning the determination of positioning accuracy and repeatability of numerically controlled(NC) machine tools have been published relentlessly over the last 20 years. Since the publication in 1988 of the International Standard 230-2 there has been a pronounced move, both at national and international standards level, to embrace further test procedures for a complete machine tool performance assessment. For example, measurements of angular (pitch, roll, and yaw) and straightness errors along linear axes are now commonplace and complement the existing positioning accuracy and repeatablity tests. More recently the subject of circularity evalutaion has also gained considerable interest. Here dynamic tests, using a kinematic ballbar or circular masterpiece, give an instant overview of the contouring ability of the machine in two axes at specific feedrates. This information is extremely important in optimising machining accuracy. This paper describes moves to complete the machine calibration package in national and international standardis- ation for the assessment of machine tool performance.