• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1734-1737
• /
• 1997

The conventional fire detection devices are operated after a processed fire phase, which are sensing only a high density of somke level or high temperature heat. They are not so precision to detect a fire in the early phase to protect the facility form the fire. We need to develope a new high precision smoke detection system to keep expensive industrial facilities most reliably form fire. A new optical precision smoke detection system was developed. It monitors very low level density of smoke particles in the air. It is operated continously through many years without a stop or any malfunction. The developed precision smoke detection system will be installed in important industrial facilities, such as power plants, underground common tunnel, main control rooms, computer rooms etc.

• Journal of Arbitration Studies
• /
• v.14 no.2
• /
• pp.173-198
• /
• 2004

Recently in Korea, franchise system has been specially used in the distribution industry. However, it also brought up many problems caused by various issues between franchisor and franchisee. The purpose of this article is to review recent trend of the franchise transaction contracts and resolution of the disputes in Korea. And to expand to use of ADR(Alternative Dispute Resolution) system as a practical dispute settlement procedure including mediation and arbitration. Arbitration means a procedure to settle any dispute in private laws, not by the adjudication of a court, but by the award of an arbitrator or arbitrators, as agreed by the parties. Arbitration agreement is a prerequisite for either party to a dispute to commence arbitral proceeding and may be in the form of a separate agreement or in the form of an arbitration clause in a contract and shall be in writing.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.10a
• /
• pp.9-14
• /
• 2000

Computational methods can be classified roughly into two parts: one is the methods based on a potential flow theory, and the other is numerical solvers(CFD) based on Navier-Stockes equation. Methods based on a potential theory are more effective than CFD when the free surface effect is considered. Especially Rankine source method seems to become widespread for simulations of wave making problems. For computations of viscous flow problems, CFD techniques have rapidly been developed and have shown many successful results in the viscous flow calculation. Present paper introduces a computational system 'WAVIS' which includes a pre-processor, potential ant viscous flow solvers and a post-processor. To validate the system, the calculated results for modem commercial hull forms are compared with measurements. It is found that the results from the system are in good agreement with the experimental data, illustrating the accuracy of the numerical methods employed for WAVIS.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1997.10a
• /
• pp.117-120
• /
• 1997

In this paper, we analyze Inventory Strategy of our country middle-small Company which are ordered form large Company which product using JIT(just in time) System. Until now, we have not found a good inventory strategy for middle small Company which such like above. In this paper, we first simply survey product lead time, lot size and safety inventory in continuous product system which idea can be adapted our object. We try to mathematical modelling of product lead time, total inventory cost of bur country middle-small Company. We suggest inventory strategy for middle-small Company.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.275-280
• /
• 2001

DESIGNIN AND OPERATION OF DIGITAL EVIDENCE MANAGEMENT SYSTEM APPLYING COMPUTER FORENSICS AND ELECTRONIC CERTIFICATION Digital evidence will be used as a term, which means the electronic form of information which is necessary to confirm or prove the factum of all kinds of behaviors committed through the devices which have data processing ability including computer. It is expected that there will be the increase of legal conflicts surrounding electronic commerce activities as well as the increase of cyber crimes, as the number of Internet users are getting bigger. In order to solve the problems of conflicts derived from electronic commerce, the factum of electronic commerce activities must be confirmed. In order to confirm the factum of electronic commerce activities, the evidence is prerequisite. Almost all evidences relating to the electronic commerce activities exist in digital form. For the reason that the digital evidence can be easily damaged and changed, special management is required to collect, analyze, and preserve the digital evidence. In order to meet this requirement, this study proposes a basic model of digital evidence management system applying computer forensics and electronic authentication.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.251-256
• /
• 2002

Resistance performance of small size fishing vessel is experimentally investigated to find out the effect of fore-body shape and trim for the better hull form development. The tests are performed for four different cases in the high speed circulating water channel(CWC). Wave patterns are observed together to investigate the relation between the resistance performance and the wave characteristics.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.174-183
• /
• 2000

Non-Parallelism the axial direction occurs during grinding process of long slender shafts. The reason for the axial error is due to elastic deformation of the components, accumulation phenomenon of the grinding and wheel wear during the grinding process. The accumulation phenomenon, the size generation mechanism and the wheel wear process during traverse grinding result in complicated process at each step on the wheel surface. The grinding system stiffness obtained from the stiffness of the center on the tailstock and the workpiece varing according to the relative position of the wheel and the workpiece. Further more, the value of wheel wear increases as the grinding process advances. The above mentioned issues make the shape generation process during traverse grinding quite complicated. This research analyzes the shape generation process in the direction of the work spindle. First, the formulation of the grinding system stiffness was conducted and the simulation analysis method of the traverse grinding was established. Also, a measuring system for assessing the dimensinal accuracy of the workpiece has been developed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.7
• /
• pp.927-934
• /
• 2012

This paper suggests a new fuzzy PID controller with variable parameters which improves the shortage of the fuzzy PID controller with fixed parameters suggested in [9]. The derivation procedure follows the general design procedure of the fuzzy logic controller, while the resultant control law is the form of the conventional PID controller. Therefore, the suggested controller has two advantages. One is that it has only four fuzzy linguistic rules and analytical form of control laws so that the real-time control system can be implemented based on low-price microprocessors. The other is that the PID control action can always be achieved with time-varying PID controller gains only by adjusting the input and output scalers at each sampling time.

• Architectural research
• /
• v.14 no.3
• /
• pp.109-116
• /
• 2012

In order to shorten construction duration in high-rise project, construction company tried to make various system method toward simplifying construction method and shortening construction duration. Though high-rise tower-type residential project are growing, there are few case study. Then, the data for preliminary schedule planning in high-rise tower-type residential project are rare. This purpose of research shows construction method in structural work in high-rise tower-type residential project, suggests schedule planning in structural work through case studies. The structural work in high-rise tower-type residential project was divided 1) completion of form in lower part and 2) the typical floor under penthouse. The statistical analysis were done in two parts, the data from analysis were used in simulation. Finally, researcher confirmed the difference between real construction duration and the figure from simulation. The results shows that the more construction duration is long, the less ACS's cost is low. It means the effectiveness is increasing in ACS, if the floor number is high.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.409-414
• /
• 2010

This paper describes the surface form measurement of a spherical smooth surface by using single shot off-axis Fizeau interferometry. The demodulated phase map is obtained and unwrapped to remove the $2\pi$ ambiguity. The unwrapped phase map is converted to height and the 3D surface height of the surface object is reconstructed. The results extracted from the single shot off-axis geometry are compared with the results extracted from four-frame phase shifting in-line interferometry, and the results are in excellent agreement.