• Nuclear Engineering and Technology
• /
• 제46권1호
• /
• pp.47-54
• /
• 2014

The protection of nuclear safety software is essential in that a failure can result in significant economic loss and physical damage to the public. However, software security has often been ignored in nuclear safety software development. To enforce security considerations, nuclear regulator commission recently issued and revised the security regulations for nuclear computer-based systems. It is a great challenge for nuclear developers to comply with the security requirements. However, there is still no clear software development process regarding security activities. This paper proposes an integrated development process suitable for the secure development requirements and system security requirements described by various regulatory bodies. It provides a three-stage framework with eight security activities as the software development process. Detailed descriptions are useful for software developers and licensees to understand the regulatory requirements and to establish a detailed activity plan for software design and engineering.

• 한국기계가공학회지
• /
• 제18권9호
• /
• pp.7-16
• /
• 2019

According to KGS FS551, the safety of an exposure pipe system should be calculated quantitatively by calculating the stress of exposed piping for thermal expansion. However, many pipe system designs and installation sites are not equipped for this. Therefore, KGS FS551 suggested the use of safe gas by presenting the recommended pipe shape. The shapes of various pipe systems have been derived. However, the recommended shape could not be an absolute evaluation standard. Furthermore, the ongoing debate over standards between a plumbing installer and an inspector is an obstacle to the efficient and safe use of gas. Therefore, the correct pipe system evaluation method is examined in this study, and the safety of the existing exposed pipe system is verified.

• 산업경영시스템학회지
• /
• 제24권69호
• /
• pp.87-92
• /
• 2001

A significant number of all reported accidents in Korea involved education and training Based on the Labor Ministry data, statistics, show the education cause was directly involved in 38% of major accidents, Since safety managers have in charge of safety education at the factory, occupational safety curriculum must be studied to train safety manager effectively. In this study an analysis on relative importance of industrial safety curriculum for a good safety manager was performed by Analytic Hierarchy Process(AHP) The results showed that relative importance of industrial safety curriculum by AHP was safety management(w=0.240) ergonomics and system safety(w=0.201) construction safety(w=0.182) mechanic safety(w=0.139) electronic safety(w=0.134) and chemical safety(w=0.104) in order. The results could be used for industrial safety curriculum planning in university and safety organization such as Korea Occupational safety and Health Agency.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.44-50
• /
• 2013

Process gas piping is one of the most basic components frequently used in the refinery and petrochemical plants. Many kinds of by-product gas have been used as fuel in the process plants. In some plants, natural gas is additionally introduced and mixed with the byproduct gas for upgrading the fuel. In this case, safety or design margin of the changed piping system of the plant should be re-evaluated based on a proper design code such as ASME or API codes since internal pressure, temperature and gas compositions are different from the original plant design conditions. In this study, series of piping stress analysis were conducted for a process piping used for transporting the mixed gas of the by-product gas and the natural gas from a mixing drum to a knock-out drum in a refinery plant. The analysed piping section had been actually installed in a domestic industry and needed safety audit since the design condition was changed. Pipe locations of the maximum system stress and displacement were determined, which can be candidate inspection and safety monitoring points during the upcoming operation period. For studying the effects of outside air temperature to safety the additional stress analysis were conducted for various temperatures in $0{\sim}30^{\circ}C$. Effects of the friction coefficient between the pipe and support were also investigated showing a proper choice if the friction coefficient is important. The maximum system stresses were occurred mainly at elbow, tee and support locations, which shows the thermal load contributes considerably to the system stress rather than the internal pressure or the gravity loads.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.171-178
• /
• 2013

Workers are avoiding production/manufacturing sites due to the poor working environment and concern over safety. Small and medium-sized businesses introduce new equipment to secure safety in the production site or ensure effective process management by introducing the real-time monitoring technique for existing equipment. The importance of real-time monitoring of equipment and process in the production site can also be found in the ANSI/ISA-195 model. Note, however, that most production sites still use paper-based work slip as a process management technique. Data reliability may deteriorate because information on the present condition of the production site cannot be collected/analyzed properly due to manual data writing by the worker. This paper introduces the monitoring and process management technique based on a direct facility interface to secure safety in the field by improving the poor working environment and enhance there liability and real-time characteristics of the production data. Since the data is collected from equipment in real-time directly through the SIB-based interface and PLC-based interface, problems associated with workers' manual data input are expected to be solved; safety can also be improved by enhancing workers' attention to work by minimizing workers' injuries and disruption.

• Nuclear Engineering and Technology
• /
• 제27권1호
• /
• pp.84-95
• /
• 1995

Application of computer software to safety-critical systems is on the increase. To be successful, the software must be designed and constructed to meet the functional and performance requirements of the system. For safety reason, the software must be demonstrated not only to meet these requirements, but also to operate safely as a component within the system. For longer-term cost consideration, the software must be designed and structured to ease future maintenance and modifications. This paper present a software engineering process for the production of safety-critical software for a nuclear power plant The presentation is expository in nature of a viable high quality safety-critical software development. It is based on the ideas of a rational design process and on the experience of the adaptation of such process in the production of the safety-critical software for the Shutdown System Number Two of Wolsong 2, 3 & 4 nuclear power generation plants. This process is significantly different from a conventional process in terms of rigorous software development phases and software design techniques. The process covers documentation, design, verification and testing using mathematically precise notations and highly reviewable tabular format to specify software requirements and software design. These specifications allow rigorous, stepwise verification of software design against software requirements, and code against software design using static analysis. The software engineering process described in this paper applies the principle of information-hiding decomposition in software design using a modular design technique so that when a change is' required or an error is detected, the affected scope can be readily and confidently located. It also facilitates a sense of high degree of confidence in the ‘correctness’ of the software production, and provides a relatively simple and straightforward code implementation effort.

• 대한안전경영과학회지
• /
• 제7권5호
• /
• pp.213-231
• /
• 2005

Assignable causes producing temporary deviation from the underlying system can influence on process adjustment and process monitoring in dynamic feedback control system. In this paper, the influence of assignable causes on EWMA forecasts and compensatory variables are derived for a dynamic feedback control system. An example is presented to confirm the impact numerically through the analysis of a data.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 추계학술대회
• /
• pp.473-485
• /
• 2012

최근 현대사회는 자동차, 철도 및 항공 등 대형 복합 시스템의 체계 속에서 지내고 있으며, 고장 및 사고로 인한 시스템의 안전 설계에 대한 고려와 안전에 대한 인식이 증가하고 있다. 따라서 기존의 시스템공학 프로세스에서 다루는 시스템 설계에 대한 단계별 안전 활동의 강화의 필요성 역시 강조되고 있다. 그 중에서도 시스템 설계의 최종 활동에 해당하는 검증 단계 활동이 제대로 수행되어야만 초기에 의도한 시스템 설계의 안전도 향상을 바라볼 수 있을 것이다. 본 논문에서는 안전 활동을 고려한 시스템공학 프로세스의 검증 단계의 개선사항 도출과 모델링을 통해 안전중시 시스템인 철도 차량 운전실 시스템을 대상으로 적용 및 조정 구축에 대한 내용을 기술하고 있다. 본 연구의 결과를 토대로 향후 품질 향상 및 비용 절감과 데이터의 관리 및 추적기능을 개선함으로써 안전사고 발생 가능성을 줄일 수 있을 것으로 기대된다.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2005년도 추계학술발표회 논문집
• /
• pp.49-58
• /
• 2005

화학공장의 취약점을 파악하여 안전성을 경제적으로 확보할 수 있는 대안에 대한 설비별 안전투자비용과 그에 따른 편익을 산출하고, 분석함으로써 경제적인 안전 투자 대안을 사업주에게 제시함으로써 안전투자 의사결정의 기초자료로 활용하도록 한다. 이를 통하여 화학공장의 안전 활동 및 안전 투자의 효율성을 증진시키고 안전성 향상을 위한 화학공장의 안전투자가치를 정립하기 위함이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1014-1015
• /
• 2008

Safety critical systems are those in which a failure can have serious and irreversible consequences. Nowadays digital technology has been rapidly applied to critical system such as railways, airplanes, nuclear power plants, and vehicles. The main difference between analog system and digital system is that the software is the key component of the digital system. The digital system performs more varying and highly complex functions efficiently compared to the existing analog system because software can be flexibly designed and implemented. The flexible design make it difficult to predict the software failures. This paper reviews safety standard and criteria for safety critical system such as railway system and suggests development process, ordering management and assessment process for railway software with more detail description.