• Journal of the Korea Society for Simulation
• /
• v.29 no.3
• /
• pp.83-91
• /
• 2020

To use the OneSAF model for the analysis of Defence M&S, the most critical factor is the acquisition of input data. The model user is hard to determine the input data such as the probability of hit(P_h) and the probability of kill(P_k). These data can be obtained directly by live fire during the development test and the operational test. Therefore, this needs more time and resources to get the P_h and P_k. In this paper, we reviewed possible ways to obtain the P_h and P_k. We introduced several data producing methodologies. In particular, the error budget method was presented to convert the P_h(%) data of AWAM model to the error(mil) data of OneSAF model. Also, the conversion method which can get the adjusted results from the JMEM is introduced. The probability of a hit was calculated based on the error budget method in order to prove the usefulness of the given method. More accurate data were obtained when the error budget method and the projected area from the published photo were used simultaneously. The importance of the P_h calculation was demonstrated by sensitivity analysis of the P_h on combat effectiveness. This paper emphasizes the importance of determining the P_h data and improving the reliability of the M&S system though steady collection and analysis of the P_h data.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.311-319
• /
• 2017

The primary suspension system of a railway vehicle restrains the wheelset and the bogie, which greatly affects the dynamic characteristics of the vehicle depending on the stiffness in each direction. In order to improve the dynamic characteristics, different stiffness in each direction is required. However, designing different stiffness in each direction is difficult in the case of a general suspension device. To address this, in this paper, an optimization technique is applied to design different stiffness in each direction by using a conical rubber spring. The optimization is performed by using target and analysis RMS values. Lastly, the final model is proposed by complementing the shape of the weak part of the model. An actual model is developed and the reliability of the optimization model is proved on the basis of a deviation average of about 7.7% compared to the target stiffness through a static load test. In addition, the stiffness value is applied to a multibody dynamics model to analyze the stability and curve performance. The critical speed of the improved model was 190km/h, which was faster than the maximum speed of 110km/h. In addition, the steering performance is improved by 34% compared with the conventional model.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.117-124
• /
• 2006

In this paper, we propose the optimal migration path searching method including path adjustment and reassignment techniques for an efficient migration of mobile agent which has an autonomous ability for some task processing. In traditional agent system, if the various and large quantify of task processing were required from the users, it could be derive excessive network traffic and overload due to increasing the size of agent. And also, if an agent migrates from node to node according to routing schedules specified by the user at which the most of network traffic occurs, it could not actively cope with particular situations such as communication loss and node obstacles and required much cost for node traversal Therefore. this paper presents the migration method of agent which can try to adjust and reassign path to the destination automatically through the optimal path search using by network traffic perception in stead of the passive routing schedule by the user. An optimal migration path searching and adjustment methods ensure the migration reliability on distributed nodes and reduce the traversal task processing time of mobile agent by avoiding network traffic paths and node obstacles.

• Journal of radiological science and technology
• /
• v.44 no.5
• /
• pp.513-523
• /
• 2021

The purpose of this study was to discuss the required items and feasibility of medical records of radiological examinations performed by radiological technologists at medical institutions. An online survey was conducted to a total of 10,000 radiation-related workers, of which 1,026 (10.3%) responded. As a research method, self-made questionnaires were used. The online survey was conducted from September 10 to September 20, 2021 for the survey period. For response data, a Chi-square test was performed according to demographic characteristics using SPSS 27.0 version (IBM Inc., Chicago, Ill, USA), and it was judged to be significant when the P value was less than 0.05. The reliability of the questionnaire response was found to be Chronbach α=0.933. More than 90% of the medical records related to radiological examinations are necessary, and they answered that a curriculum, remuneration curriculum, and legal system for medical records should be prepared. More than 90% of the respondents agreed with the proposal of the Radiological Technologist Independent Act for legal preparation, and most of the information required for medical records is currently recorded in DICOM images. According to the demographic characteristics, the medical record requirement for radiological examination, curriculum, continuing education, and legislation were found to be higher with higher education and higher with longer working experience. In addition, most of the radiology departments showed a high demand for medical records, so most of them responded positively to the medical records requirements for radiological examinations. This study analyzed the medical record requirements for radiological examinations, and as shown in the results, medical record requirements for radiological examinations was found that most radiological technologists felt need for the new law and supported it. In addition, if the information recorded in the DICOM image is used, it is considered that medical records could be easily prepared without additional work by the radiological technologists.

• Journal of the Korea Convergence Society
• /
• v.12 no.12
• /
• pp.75-81
• /
• 2021

In the new era of the 4th industrial revolution, new jobs using the latest technologies such as big data, cloud, IoT, and AI are increasing. In the field of various industries, talents who can converge IT and industrial fields are needed, but such convergence-type talents are insufficient. This study analyzed the effects of IT convergence startup education on the learning effect and educational performance of trainees preparing for re-employment. A survey was conducted with 160 trainees preparing for reemployment. Frequency analysis, reliability analysis, correlation analysis, and multiple regression analysis were performed using the analysis tool SPSS 22.0 program. As a result of the study, first, in the IT convergence startup education of trainees who are preparing for re-employment, it was found that the sub-factors such as education content, instructor, and member satisfaction had a positive effect on the learning effect. Second, in the IT convergence start-up education for employment trainees, it was found that the sub-factors such as education contents, instructors, and the satisfaction of learning members had a significant effect on educational performance. It is expected that this study will serve as a basic data for preparing a start-up support system to revitalize start-ups in the IT convergence field.

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.311-320
• /
• 2021

The purpose of this study is to identify the mediating effect of self-efficacy in the relationship between the leadership style of badminton life sports leaders and the performance of club members. A total of 600 badminton club members were invited to participate and 593 were selected for this study. For data analysis, mediating effects were verified through frequency analysis, exploratory factor analysis, reliability analysis, correlation analysis, multiple regression analysis, and hierarchical regression analysis. For result section, first, it was found that training instruction behavior, authoritative behavior, and social behavior, which are sub-factors of the leader leadership type, have a positive effect on performance(p<.05). Second, it was found that training instruction behavior, which is a sub-factor of leader leadership type, had a positive effect on self-efficacy(p<.01), and that authoritarian behavior had a negative effect on self-efficacy(p<.01). Third, the mediating effect of self-efficacy was found indirectly in the relationship between leader leadership and performance(p<.001). Based on these results, it is judged that it will be easier to build a more effective training system if the direction for the leadership and guidance type of life sports is set by reflecting the needs of the participants.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1317-1328
• /
• 2021

This study analyzes the early satellite mission marine fog detection results from Geostationary Ocean Color Imager-II (GOCI-II). We investigate optical characteristics of the GOCI-II spectral bands for marine fog between October 2020 and March 2021 during the overlapping mission period of Geostationary Ocean Color Imager (GOCI) and GOCI-II. For Rayleigh-corrected reflection (R_rc) at 412 nm band available for the input of the GOCI-II marine fog algorithm, the inter-comparison between GOCI and GOCI-II data showed a small Root Mean Square Error (RMSE) value (0.01) with a high correlation coefficient (0.988). Another input variable, Normalized Localization Standard (NLSD), also shows a reasonable correlation (0.798) between the GOCI and GOCI-II data with a small RMSE value (0.007). We also found distinctive optical characteristics between marine fog and clouds by the GOCI-II observations, showing the narrower distribution of all bands' R_rc values centered at high values for cloud compared to marine fog. The GOCI-II marine fog detection distribution for actual cases is similar to the GOCI but more detailed due to the improved spatial resolution from 500 m to 250 m. The validation with the automated synoptic observing system (ASOS) visibility data confirms the initial reliability of the GOCI-II marine fog detection. Also, it is expected to improve the performance of the GOCI-II marine fog detection algorithm by adding sufficient samples to verify stable performance, improving the post-processing process by replacing real-time available cloud input data and reducing false alarm by adding aerosol information.

• Journal of Internet Computing and Services
• /
• v.22 no.5
• /
• pp.17-26
• /
• 2021

This paper is about a physical layer frame security technique using OFB-style encryption/decryption with AES algorithms on Gigabit Ethernet network. We propose a data security technique at the physical layer that performs OFB-style encryption/decryption with AES algorithm with strong security strength when sending and receiving data over Gigabit Ethernet network. Generally, when operating Gigabit Ethernet network, there is no security features, but data security is required, additional devices that apply this technique can be installed to perform security functions. In the case of data transmission over Gigabit Ethernet network, the Ethernet frames conform to IEEE 802.3 specification, which includes several fields to ensure proper reception of data at the receiving node in addition to the data field. When encrypting, only the data field should be encrypted and transmitted in real time. In this paper, we show that only the data field of the IEEE802.3 frame is encrypted and transmitted on the sending node, and only the data field is decrypted to show the plain text on the receiving node, which shows that the encryption/decryption is carried out correctly. Therefore, additional installation of devices that apply this technique can increase the reliability of the system when security for data is required in Ethernet network operating without security features.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.4
• /
• pp.28-36
• /
• 2021

It is known that buried rebars inside concrete structures are protected from corrosion due to passive layer. It is very important to delay the timing of corrosion or evaluate a detection of corrosion initiation for the purpose of cost-beneficiary service life of a structure. In this study, corrosion monitoring was performed on concrete specimens considering 3 levels of cover depth(60 mm, 45 mm, and 30 mm), W/C(water to cement) ratio(40.0%, 50.0%, and 60.0%) and chloride concentration(0.0%, 3.5%, and 7.0%). OCP(Open Circuit Potential) was measured using agar-based socket type sensors. The OCP measurement showed the consistent behavior where the potential was reduced in wet conditions and it was partially recovered in dry conditions. In the case of 30 mm of cover depth for most W/C ratio cases, the lowest OCP value was measured and rapid OCP recovery was evaluated in increasing cover depth from 30 mm to 45 mm, since cover depth was an effective protection against chloride ion ingress. As the chloride concentration increased, the effect on the cover depth tended to be more dominant than the that of W/C ratio. After additional monitoring and physical evaluation of chloride concentration after specimen dismantling, the proposed system can be improved with increasing reliability of the corrosion monitoring.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.35-48
• /
• 2019

Domestic hydraulic drifters till now have been developed by benchmarking products from overseas leading companies. However, they do not have excellent impact performance as they are not suitable for characteristics (large flow rate and low pressure) of Korean hydraulic drill power pack, and therefore, research on the optimum design has not made much headway. This study performs multi-objective function optimization for hydraulic drifters whose capacity has been redesigned to deal with the large flow rate, and also with the help of this function, it aims to improve impact power and reduce supply and surge pressure. A summary of the research study is as follows: First, we set goals for improving impact power, supply pressure, and surge pressure, and then perform multi-objective function optimization on them. After that, we secure the reliability of the optimized analytical model by comparing the test results of the prototype built by the optimized design with the analysis results of the analytical model. This study used SimulationX, that is the hydraulic system analysis software, and EasyDesign, which is a multi-objective function optimization program. Through this research, we have achieved the results that satisfy the goal of developing high power drifters suitable for Korean type hydraulic drills.