• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.689-693
• /
• 1997

This paper deals wth the impact and the transient analysis of the impact absorbing system consist of double damping. piston and sprlng system in spreader to increaas efficlcncy of it. It shows the optimum damping coefficient and spring constant under the limited stroku of Impact absorbing system using for crane spreader and the optimum condition of impact absorbing system causing certain reaction force as time. which is characteristic of dashpot and rubber. This system absorbed 11.5 and 88.5 % impact energq at the spring and the damper respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1529-1532
• /
• 2003

This paper deals with the impact analysis of the impact absorbing system consist of one degree of freedom and two degree of freedom damping-spring system in spreader to increase efficiency of it. It shows the optimum damping coefficient and spring constant of impact absorbing system using for crane spreader and the optimum condition of impact absorbing system causing certain contact impulse. In the optimal model, the contact impulse is reduced 98.57 percent and 92.22 percent respectively.

• Korean Journal of Computational Design and Engineering
• /
• 제5권2호
• /
• pp.184-195
• /
• 2000

MDO (Multidisciplinary Design Optimization) methodology is an emerging new technology to solve a complicate structural analysis and design problem with a large number of design variables and constraints. In this paper MDO methodology is adopted through the use of computer aided systems such as Geometric Solid Modeller, Mesh Generator, CAD system and CAE system. And this paper introduces MDO methodology as a new method for structural analysis and design through the application to the structural design of flap drive system. In a MDO methodology application to the structural design of flap drive system, kinetodynamic analysis is done using a simple aerodynamic analysis model for the air flow over the flap surface instead of difficult aerodynamic analysis. Simultaneously the structural static analysis is done to obtain the optimum structural condition. And the structural buckling analysis for push pull rod is also done to confirm the optimum structural condition (optimum cross section shape of push pull rod).

• Transactions of the Korean Society of Machine Tool Engineers
• /
• 제11권5호
• /
• pp.15-22
• /
• 2002

A study is the selection of optimum forming condition for RP system. We develop the Automatic design program for machine element using visual LISP program in AutoCAD. Automatic design program reduces the required time for feedback between design and manufacturing of workpiece. Also we investigate the relationship between circularity of 3D solid model and circularity of rapid prototype using RP system and we will find optimum forming condition in RP system.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
• /
• pp.3-7
• /
• 2001

Although elbows are commonly used in practice, many questions regarding the optimum arrangement still remain unanswered. The effect due to an elbow lasts for a considerable distance downstream of the elbow and is severe when two elbows are in the system. The goal of this study is to provide an effective guide for the optimum arrangement of elbows and the optimum design of the approach piping system.

• Journal of the Korea Society of Computer and Information
• /
• 제16권5호
• /
• pp.101-107
• /
• 2011

The optimum weight vector is studied to remove interference and jamming signals in adaptive array antenna system. The optimum weight vector is calculated to apply a minimum variance algorithm and cost function in linearly constrained conditions, and accurately estimates target's signal. Adaptive array antenna system is the system which improves signal to noise ratio(SNR) and decreases interference and jammer power. Adaptive array antenna system delays at tap output of antenna array element. Each tap finally makes the complex signal of one in multiplier complex weight. In order to obtain optimum's weight calculation, optimum weight vector is used in this paper. After simulation, resolution is increased below $3^{\circ}$, and sidelobe is decreased about 10 dB.

• Textile Coloration and Finishing
• /
• 제11권5호
• /
• pp.38-43
• /
• 1999

A calculation method of optimum parameters on dual adsorption isotherm system was examined. The optimum parameters were obtained by non-linear regression analysis based upon a limited solute concentration of dual adsorption isotherm. The results were analyzed with adducing experimental data of formerly reported treaties. The percentage mean deviation of dual adsorption equation calculated with optimum parameters was less than about 5% of experimental data, which was far less than results obtained with parameters of the adduced treatises.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.395-402
• /
• 2003

Characteristics of base isolators including frictional and hysteretic types may be described by Bouc-Wen model. A probabilistic optimum design method of the base isolation system using Bouc-Wen model is presented in this paper. For optimum design, the objective function and constraints are derived based on the stochastic responses of the system. As a numerical example, the optimum design problem of a three-story base isolated shear type structure is formulated and solved by the sequential quadratic programming method.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• 제53권4호
• /
• pp.227-233
• /
• 2004

In stressed power system due to the presence of increased nonlinearity and the existence of nonlinear modal interactions. there exist some limitations to the use of conventional linear system theory to identify the optimum sites for a controller. This paper suggests an approach based on the method of normal forms to identify the optimum sites for controllers with incorporating the nonlinear interaction . In this paper, nonlinear participation factors and coupling factors are proposed as measures of the nonlinear interactions, and identification procedure of optimum sites for a controller is also proposed. The proposed procedure is applied to the 10-generator New England System and the KEPCO System in the year of 2010, and the results illustrate its capabilities.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• 제53권4호
• /
• pp.227-227
• /
• 2004

In stressed power system due to the presence of increased nonlinearity and the existence of nonlinear modal interactions. there exist some limitations to the use of conventional linear system theory to identify the optimum sites for a controller. This paper suggests an approach based on the method of normal forms to identify the optimum sites for controllers with incorporating the nonlinear interaction . In this paper, nonlinear participation factors and coupling factors are proposed as measures of the nonlinear interactions, and identification procedure of optimum sites for a controller is also proposed. The proposed procedure is applied to the 10-generator New England System and the KEPCO System in the year of 2010, and the results illustrate its capabilities.