• 품질경영학회지
• /
• 제43권1호
• /
• pp.31-42
• /
• 2015

Purpose: System consists of a lot of units with coherent function. In design phase, various units could be considered with the same function. In this study, we consider the alternative units with the same function and redundancy allocation to maximize system reliability in multi level system. Methods: The redundancy allocation problem with the alternative units in multi level system is formulated. Memetic algorithm(MA) is proposed to optimize the redundancy allocation problem. In addition, the performance of the proposed algorithm is explained by a numerical experiment. Results: MA showed better results than genetic algorithm(GA) and the convergence of the solutions in MA was also faster than GA. In addition, we could know from experiment that system reliability is increased and the chosen unit for redundancy allocation is changed if cost limit is increased. Conclusion: The chose unit for redundancy allocation is changed as resource constraints. It means we need to consider the alternative units in system design. In the future, we need to consider various problem related to redundancy allocation in multi level system and develop the better method to enhance search performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.208-211
• /
• 2005

This paper describes the development process of steering system for reduce idle vibration through the data level of frequency and sensitivity. High stiffness and light weight vehicle is a major target in the refinement of passenger cars to meet customers' contradictable requirements between NVH performance and fuel economy. The target frequency of the steering system is set by benchmarking of a competitive vehicle and the vibration mode map is used to separate steering column modes from resonance of body structure and engine idle rpm. This paper descirbes the analysis approach process for high stiffness of steering system and the design guideline is suggested about steering column and support system by using mother car at initial design stage. We used a patent map in order to analyze accurately a technical trend and suggested the design process using dynamic damper of steering system considering sensitivity. And we established techniques of analysis on steering system and evaluated the level of accuracy of analysis through correlating the test and analysis results. It makes possible to design the good NVH performance vehicle at initial design stage and save vehicles to be used in tests. These improvements can lead to shortening the time needed to develop better vehicles.

• Nuclear Engineering and Technology
• /
• 제44권6호
• /
• pp.689-696
• /
• 2012

A small integral reactor SMART (System Integrated Modular Advanced ReacTor), being developed in Korea since late 1990s and targeted to obtaining a standard design approval by the end of 2011, is introduced. The design scope and level for design certification (DC) is well described in the U.S. NRC SECY documents published the early 1990s. However, the documents are valid for a one-step licensing process called a combined operating license (COL) by the U.S. NRC, while Korea still uses a two-step licensing process. Thus, referencing the concept of the SECY documents, we have established the design scope and level for the SMART DC using the contexts of the standard review plan (SRP). Some examples of the results and issues raised during our review are briefly presented in this paper. The same methodology will be applied to other types of reactor under development in Korea, such as future VHTR reactors.

• 동력기계공학회지
• /
• 제15권1호
• /
• pp.57-63
• /
• 2011

It is very important to determine link composition of a crane in the basic design of the crane. There are many parameters in the design for the link composition of a double link type level luffing jib crane. We analyze the variation of link composition according to the variation of these parameters which are the angle of fixed link, the angle between the fixed link and backstay when the position of the crane is the maximum working radius, the ratio of fly jib length between two moving hinges to the total length of fly jib, the length of backstay, and the slewing radius. In this paper, we describe the application of the previous analysis program of the link composition design for a double link type level luffing jib crane.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1598-1611
• /
• 2016

In some special occasions with strict size requirements, such as mine hoists, improving the design accuracy of the forced-air cooling systems of NPC three-level inverters is a key technology for improving the power density and decreasing the volume. First, a fast power-loss calculation method was brought. Its calculation principle introduced in detail, and the computation formulas were deduced. Secondly, the average and dynamic power losses of a 1MW mine hoist acting as the research target were analyzed, and a forced-air cooling system model based on a series of theoretical analyses was designed with the average power loss as a heat source. The simulation analyses proves the accuracy and effectiveness of this cooling system during the unit lifting period. Finally, according to an analysis of the periodic working condition, the maximum power-loss range of a NPC three-level inverter under multi cycle operation was obtained and its dynamic power loss was taken into the optimized cooling system model as a heat source to solve the power device damage caused by instantaneous heat accumulation. The effectiveness and feasibility of the optimization design based on the dynamic power loss calculation of the maximum power-loss range was proved by simulation and experimental results.

• 보건의료산업학회지
• /
• 제8권1호
• /
• pp.1-13
• /
• 2014

The purpose of this study is to investigate the perception of quality property of hospital information system, the quality level, and its effects. The participants were 730 employees who are using hospital information system in hospitals. In order to analyze the relationship, the quality property regulates the consideration of user's taste and the state of user's favor for the design of hospital information system, and the quality level regulates user's convenience and properness. The main results from this study can be summarized as follows, First, the perception of quality property for hospital information system showed few significance level between occupation, but revealed significance level between position. The evaluation of quality level showed significance level depending on the occupation and position. Second, quality property which generally affects to the quality level of the hospital information system were different between types of occupation and quality factor.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.700-703
• /
• 2004

The purpose of this study is to present the design methodology of base isolated buildings. To achieve the goal of this study, time-history analysis was performed with seismic performance level and recorded seismic data. From the analysis results of MDOF system, the maximum. displacement and base shear were evaluated as 25 cm and $4\%$ by the input level which is maximum velocity of 50 kine. By introducing hybrid isolation system, seismic energy can be concentrated consequently high seismic capacity of the total building is secured.

• 융합신호처리학회논문지
• /
• 제11권2호
• /
• pp.177-182
• /
• 2010

시스템수준 설계방법론에서 널리 사용하고 있는 설계흐름도는 시스템명세, 시스템수준의 하드웨어/소프트웨어 분할, 하드웨어/소프트웨어 통합설계, 가상 또는 물리적 프로토타입을 이용한 통합검증, 시스템통합으로 구성된다. 시스템의 하드웨어 구성요소를 개발하는 과정에서 이전까지는 디자인단계가 많은 시간 및 노력을 요구하는 단계였지만, 현재에는 설계한 디자인의 기능적 검증단계가 중요 요소로 간주되고 있다. 본 논문에서는 시스템수준 설계언어인 SystemC 기반의 테스트벤치 구조를 이용하여 Verilog HDL로 설계된 하드웨어 구성요소의 올바른 동작여부를 판별하는 기능검증시스템을 설계하였다. 설계된 기능검증시스템에서 SystemC 모듈의 멤버 변수와 Verilog 모듈의 와이어 및 레지스터 변수간의 데이터 전달은 본 논문에서 정의되는 SystemC 사용자 정의 통신채널을 통하여 이루어진다. 제안된 기능검증시스템을 UART에 적용하여 올바른 동작여부를 판별하였다. 본 논문의 기능검증시스템 설계에 사용된 SystemC는 C++기반의 하드웨어 모델링용 클래스 라이브러리를 제공하므로 RT 수준보다 높은 추상화수준에서 소프트웨어와 하드웨어 또는 이 둘을 결합한 시스템수준의 모델링을 단일 언어와 환경에서 설계할 수 있는 이점이 있다. 또한 기능검증시스템 설계에 작성된 SystemC 모듈 코드들은 부분적인 코드 수정 후 다른 하드웨어 구성요소의 기능을 검증하는데 재사용할 수 있는 이점이 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.398-402
• /
• 1996

This paper addresses the design and the gait control of quadruped walking robot. First, we concern the mechanical and electronical(control system) hardware of walking robot, and the second is the results of experiments. The walking robot is the most suitable form to substitute fot human being. So walking robot is worthy of research. The quadruped walking robot and control system is the simplest type of walking robot, therefore we designed a small seale robot for realization of static gait. The robot is designed commpactly and its legs are constructed parallel link type and able to move freely in space. Control system consists of one upper level controller and four lower level controllers. The upper level controller plans the walking path and commands the low level controllers to follow the planned path. The main function of low level cotrollers is control of motors. Total number of motors is twealve and they operate four legs. And robot is ordered to walk and realize static wave gait.

• 동력기계공학회지
• /
• 제14권2호
• /
• pp.55-59
• /
• 2010

In the study, it is considered sporty car as 1400cc entry cars using sound generator. These cars are required special sound quality, also sporty sound quality. The operational principle of this sound generator system is that on the operation of the engine intake valves caused pulsating is to shake the membrane of the sound generator on the inside of the driver front dash panel through the intake manifold, which will deliver the required sound quality and tone. For the component constructed sound generator, main design parameters are selected and optimized using the daguchi's method. The results are as follows; The C2 sound level must be minimized and C4 level must be maximized. And also overall level keeps linear characteristics.