• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.95-97
• /
• 2005

Communication, Ocean, and Meteorological Satellite (COMS) to be launched in year 2008 will be the first Korean multi-purpose geostationary satellite aiming at three major missions, i.e.: communication, ocean, and meteorological applications. The development of systems for the meteorological mission sponsored by the Korea Meteorological Administration (KMA) consists of payloads, ground system, and data processing system. The program called COMS Meteorological Data Processing System (CMDPS) has been initiated for the development of data processing system. The primary objective ofCMDPS is to derive the level-2 environmental products from geo-Iocated and calibrated level 1.5 COMS data. Preliminary design for the level-2 data processing system consists of 16 baseline products and will be refined by end of 3rd project year. Also considered for the development are the necessary initial information such as land use and digital elevation map, algorithms for the vicarious calibration and procedures for the calibration monitoring, and radiative transfer model. Here, we briefly introduce the overall development strategy, flow chart for the intended baseline products, a few preliminary algorithm results and future plans.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.25-32
• /
• 2006

Weapon systems composed of several subsystems execute various engagement missions in distributed combat environments in cooperation with a large number of subordinate/adjacent weapon systems as well as higher echelons through tactical data links. Such distributed weapon systems require distributed real-time simulation test beds to integrate and test their operational software, analyze their performance and effects of cooperated engagement, and validate their requirement specifications. These demands present significant challenges in terms of real-time constraints, time synchronization, complexity and development cost of an engagement simulation test bed, thus necessitate the use of high-performance distributed real-time simulation architectures, and modeling and simulation techniques. In this paper, in order to meet these demands, we presented a distributed real-time simulation system based on High Level Architecture(HLA) and Discrete Event System Specification(DEVS). We validated its performance by using it as a test bed for developing the Engagement Control System(ECS) of a surface-to-air missile system. The proposed technique can be employed to design a prototype or model of engagement-level distributed real-time simulation systems.

• 복식문화연구
• /
• 제11권4호
• /
• pp.487-499
• /
• 2003

The purpose of this study was to suggest marketing strategies to internet fashion shopping malls identifying factors that customers consider important. Data were collected by survey questionnaire and the subjects were 322 men and women in their twenties and thirties living in Seoul and Kyung-gi. SPSS 10.0 package were used and reliability, frequency, cross tabulation, chi-square, paired t-test, ANOV A and Duncan test were conducted for data analysis. The results were as follows. I) Subjects placed the most importance on providing the precise and detail information of products but its satisfaction level was low. 2) Subjects considered the ‘low price’ very importantly but its satisfaction level of it was not high. 3) Subject's importance and satisfaction level of ‘point system’ were about an average. 'Point system' has to be activated by using systems such as 'point network system' by pointbanking co. as one of price-cutting strategies. 4) Internet fashion shopping mall users treated 'the security system of personal data' importantly while they were not sufficiently satisfied with the system. 5) Female placed more importance on design and color of products and suppliance of the trendy items.

• 유통과학연구
• /
• 제17권3호
• /
• pp.5-19
• /
• 2019

Purpose - The purpose of this research is to investigate the factors contributing to sustainable competitive advantage for multi-level marketing (MLM) firms in Malaysia. The selected variables in this study are company image, product innovation, leadership, distributor rewards system and distributor training system. Research design, data, and methodology - Quantitative research method is employed with collected sample size of 398 respondents using judgmental sampling technique. Normality and reliability test were performed in the first stage utilizing SPSS 22 and Confirmatory Factory Analysis (CFA) and variance analysis were obtained in the subsequent stage, following up with the overall fit of the measurement model, Structural Equation Model (SEM) using AMOS 22 with maximum likelihood estimation to assess the internal consistency, convergent validity and discriminant validity. Results - The research findings show that company image, leadership, distributor rewards system and distributor training system were supported and are factors affecting the sustainable competitive advantage of MLM companies in Malaysia. However, in this study, product innovation was not supported but this result does not depict that it is trivial and inconsequential in maintain sustainable advantage. Conclusion - Companies can build sustainable competitive advantage by focusing on these contributing factors. Several other comments and implications were brought to light and discussed in the paper.

• 한국통신학회논문지
• /
• 제29권12C호
• /
• pp.1707-1721
• /
• 2004

본 논문에서는 네트워크 차원의 종합적인 보안관리가 가능한 침입탐지시스템의 분산 통신모델을 제안하고 보안노드와 분산 시스템 레벨에서 각각 모델링하고 시뮬레이터를 설계하고 구현한다. 노드 레벨에서는 하드웨어기반 침입탐지를 수행하는 기가비트 보안 노드의 구조분석을 기반으로 경보 메시지의 전달 성능을 평가한다. 분산 시스템 레벨에서는 보안정책을 기반으로 네트워크 수준에서 분산 침입방지시스템의 컴포넌트 사이에 전달되는 탐지 및 경보 정보의 전달 성능을 모의실험을 통하여 성능평가를 수행한다. 제안된 모델에서 통신 메커니즘의 결정요인들을 적용하여 성능 평가를 수행하고 시스템의 정량적인 이해를 하기 위하여 결과를 제시한다.

• 제어로봇시스템학회논문지
• /
• 제8권12호
• /
• pp.1036-1040
• /
• 2002

To process data of digital linescan camera, the frame grabber is essential to handle the data in low-level and in high speed more than 30 MHz stably. Traditional approaches to the development of hardware in vision system for the special purpose are mai y based on PC system, and are expensive and gigantic. Therefore, there are many difficulties in applying those in the field. So we investigate, in this paper, the implementation of FPGA for real-time processing of digital linescan camera. The system is not based on PC, but electronic device such as micropncessor. So it is expected that the use of FPGAs for low-level processing represents a fast, stable and inexpensive system. The experiments are carried out on the web guiding system in order to show the efficiency of the new image processor.

• 산업경영시스템학회지
• /
• 제21권48호
• /
• pp.269-277
• /
• 1998

In this study, a traditional concept of sampling inspection plan for the quality assurance system is extended to a consideration of economic aspects in total production system by representing and analyzing the effects between proceding/succeeding production process including inspection. This approach recognizes that the decision to be made at one manufacturing process (or assembly process) determine not only the cost and the average outgoing quality level of that process but also the input parameters of the cost and the incoming quality to the succeeding process. By analyzing the effects of the average incoming and outgoing quality, manufacturing/assembly quality level and sampling inspection plan on the production system, mathematical models and solution technique to minimize the total production cost for a single product manufacturing system with specified average outgoing quality limit (AOQL) are suggested.

• 산업경영시스템학회지
• /
• 제35권1호
• /
• pp.124-131
• /
• 2012

This paper presents a spreadsheet-based reliability prediction simulation framework for the conceptual product design stage to acquire system reliability information in timely manner. During early stage, reliability performance deals with both known and unknown failure rates and component-level and subsystem-level failure estimate to predict system reliability. A technique for performing life testing simulation using Excel spreadsheet has been developed under the such circumstances. This paper also discuss the results obtainable from this method such as reliability estimate, mean and variance of failures and confidence intervals. The resultant of this reliability prediction system is mainly benefitting small and medium-sized enterprise's field engineers.

• 산업공학
• /
• 제22권3호
• /
• pp.214-222
• /
• 2009

In the early design stage, system reliability must be estimated from life testing data at the component level. Previously, a point estimate of system reliability was obtained from the unbiased estimate of the component reliability after assuming that the number of failed components for a given time followed a binomial distribution. For deriving the confidence interval of system reliability, either the lognormal distribution or the normal approximation of the binomial distribution was assumed for the estimator of system reliability. In this paper, a new estimator is used for the component level reliability, which is biased but has a smaller mean square error than the previous one. We propose to use the beta distribution rather than the lognormal or approximated normal distribution for developing the confidence interval of the system reliability. A numerical example based on Monte Carlo simulation illustrates advantages of the proposed approach over the previous approach.

• 한국경영과학회지
• /
• 제21권2호
• /
• pp.17-33
• /
• 1996

Automatic transfer defined as an integrated system with a number of workstations, interstation storage buffers, automatic device and a control system, play a major role in ass production systems. Due to high capital investment needed for an automatic transferline, greater care should be taken in its design so as to maximize the system performance. One may to control the system performance is to control buffer storage. To control the interstation work-in-process inventory, we propose dual limit switches which control the buffer storage with two parameters, R and r. Under the policy, proceding station is forced down when the inventory level in the buffer reaches R until the level falls to r. For the model developed, we analyze the system characteristics and find the optimal control parameters with a serach procedure.