• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.293-302
• /
• 2014

This study was carried out to develop rain shelter which can make an appropriate size and environment for Chinese cabbage rainproof cultivation. Fifty three farms with chinese cabbage rainproof cultivation system have been investigated to set up width and height of rain shelter. Mostly the width of 6m was desired for rain shelter and the height of 1.6m for their eaves, so these values were chosen as the dimensions for rain shelter. After an analysis of their structural safety and installation costs by the specifications of the rafter pipe, Ø$25.4{\times}1.5t$ and 90cm have been set as the size of rafter that such size costs the least. This size is stable with $27m{\cdot}s^{-1}$ of wind velocity and 17cm of snow depth. Therefore it is difficult to apply this dimension to area with higher climate load. In order to sort out such problem, the rain shelter has been designed to avoid damage on frame by opening plastic film to the ridge. Once greenhouse band is loosen by turning the manual switch at the both sides of rain shelter and open button of controller is pushed then switch motor rises up along the guide pipe and plastic film is opened to the ridge. Chinese cabbage can be damaged by insects if rain shelter is opened completely as revealed a field. To prevent this, farmers can install an insect-proof net. Further, the greenhouse can be damaged by typhoon while growing Chinese cabbage therefore the effect of an insect-proof net on structural safety has been analyzed. And then structural safety has been analyzed through using flow-structure interaction method at the wind condition of $40m{\cdot}s^{-1}$. And it assumed that wind applied perpendicular to side of the rain shelter which was covered by insect-proof net. The results indicated that plastic film was directly affected by wind therefore high pressure occurred on the surface. But wind load on insect-proof net was smaller than on plastic film and pressure distribution was also uniform. The results of structural analysis by applying pressure data extracted from flow analysis indicated that the maximum stress occurred at the end of pipe which is the ground part and the value has been 54.6MPa. The allowable stress of pipe in the standard of structural safety must be 215 MPa or more therefore structural safety of this rain shelter is satisfied.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.308-316
• /
• 2015

This study was conducted to investigate the situation of ICT apply to plastic greenhouse, and the results be apply to design of new one. A CFD analysis were conducted to monitering the ventilation and energy saving of the single span greenhouse newly designed. The causes of delay to apply ICT to plastic greenhouse are the high cost for installation(24%), insufficiency of after services(19%), often disorder(16%), unskillful management of soft ware(15%), insufficient ICT efficiency(13%) and unsatisfying of income increase(12%). The parts of problem occurred in ICT plastic greenhouse are the structure, actuator, environmental control system and sensor(approximate 14%, respectively), remote control technique(13%), plant management technique(12%), energy saving technique(10%) and utilization of software(8%). In the condition of lateral window closed, the average wind speed changed to slow, but it was faster in the condition of leeward side window opened than in the condition of lee and winward side window opened. The air movement in the condition of lateral window closed occur by air moving fan not by out air. It is not affect the room temperature but effective the uniformity of room temperature. The average temperature of low height greenhouse was uniform than high height one. The average temperature in condition of 3rd curtain opened become same with outside temperature after 2 hours, but take more 5 hours in condition of 3rd curtain closed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.1
• /
• pp.44-53
• /
• 2006

This study purposed to investigate air pollution in car shipping yards and, for this purpose, we selected an outdoor open-air yard and an indoor ramp into the ship and measured the concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10, PM2.5 and heavy metals in the air. The results of this study are as follows. No significant difference was observed in temperature and humidity between the outdoor and indoor workshop, and the average air flow was 0.52 m/s in the indoor workshop, which is higher than 0.19 m/s in the outdoor workshop(p<0.01). The average concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10 and PM2.5 according to workplace were 0.03 ppm(${\pm}0.01$), 0.03 ppm(${\pm}0.01$), 0.46 ppm(${\pm}0.22$), $39.44{\mu}g/m^3$(${\pm}2.45$) and $5.45{\mu}g/m^3$(${\pm}1.15$) respectively in the outdoor workshop, and 0.15 ppm(${\pm}0.05$), 0.22 ppm(${\pm}0.06$), 8.85 ppm(${\pm}3.35$), $236.39{\mu}g/m^3$(${\pm}58.21$) and $152.43{\mu}g/m^3$(${\pm}35.42$) respectively in the indoor workshop. Thus, the concentrations of gaseous substances in the indoor workshop were 4.9-19.2 times higher than those in the outdoor workshop, and the concentrations of fine dusts were 5.9-27.9 times higher(p<0.01). In addition, according to the result of investigating pollutant concentrations according to displacement and the number of car loaded when shipping gasoline cars into the ship, no significant relation between the number of cars loaded and pollutants was observed in shipping passenger cars, but the concentrations of nitrogen dioxide and carbon monoxide got somewhat higher with the increase of the number of cars loaded(p<0.05). In addition, the concentrations of nitrogen dioxide, carbon monoxide, PM10 and PM2.5 in the air were significantly higher when shipping recreational vehicles, the displacement of which is larger than passenger cars, than when shipping passenger cars(p<0.01). On the other hand, the average heavy metal concentrations of the air in indoor workshop were: lead $-0.05{\mu}g/m^3$(${\pm}0.10$); chromium $-0.90{\mu}g/m^3$(${\pm}0.18$); zinc $-0.38{\mu}g/m^3$(${\pm}0.24$); copper $-0.18{\mu}g/m^3$(${\pm}0.22$); and manganese and cadmium not detected. In addition, the complaining rates of 'asthma,' a major symptom of chronic respiratory diseases, were 18.5% and 22.5% respectively in indoor workers and outdoor workers. Thus the rate was somewhat higher in indoor workers but the difference was not statistically significant. The complaining rates of 'chronic cough' and 'chronic phlegm' were very low and little different between indoor and outdoor workers. The results of this study show that the reason for the higher air pollution in indoor than in outdoor workshop is incomplete combustion of fuel due to sudden start and over-speed when cars are driven inside the ship. In order to prevent high air pollution, efficient management measures should be taken including the observance of the optimal speed, the improvement of old ships and the installation of efficient ventilation system.

• Korean Journal of Veterinary Service
• /
• v.21 no.3
• /
• pp.285-300
• /
• 1998

1. The number of average milking cows, clinical forms of mastitis, mastitis-developing cows, and cows killed by mastitis a year were 25.7, 1.8(7%), 6.3(26%), and 2.7(10.1%)heads, respectively. The annual grade changes of standard plate counts(SPC) and somatic cell counts(SCC) showed the grade 1A of SPC diminished sharply from April to August, we think it was due to the lack of proper management in farming season and the grade 3 of SCC indirectly influenced increased in huge during August. 2. The average number of parturitions of farms was 2.3, but 50% of below 1 parturition were 22 farms(31%), 50% of above 3 parturitions were 16(23%) out of 71 farms. According to grades of the number of parturitions of milking cows per each farm, the farms' grades recording 3 parturitions and 50% were little bit excellent. 3. The actual situation research of foremilking CMT revealed 35 out of 74 farmer didn't do CMT Among them(35 out of 74 farmers), 80% did not test thanks to the troublesome process of the CMT. SCC grade 3, among farms who did foremilking CMT once or twice a month and who did not were 29% and 40% respectively and SPC grade 1A were 55% and 9%, respectively. 4. The research of actual situation on milking management let us know 29 farms(39%) did not do lastmilking, 37 farms(49%) usually did overmilking, and 34 farms(46%) did milking for 4 or 5 minutes. Grades according to average requiring times of milking showed SCC grade 1 of farms milking within 7 minutes was 11% and SPC grade 1A was 34%, on the other side, farms milking more than 7 minutes were 0% in SCC grade 1 and 13% in SPC grade 1A. Grades according to the starting time of milking after rubbing teats showed SPC grade 1A of farms starting milking at about 1 minute and over 2 minutes were 50% and 20%, respectively. 5. The research of actual situation on hygienic milking management uncovered 65 farms(88%) were using one towel which was used in washing teats and udders to wash more than 3 to 4 cows, and 53 farms(72%) were using one dried towel to dry udders not for each cow but for more than 3 to 4 cows after washing. Also, on milking turns disclosed 30 farms(40%) were milking cows in the order of incoming without isolation of a dominant group. According to grades of towels used in washing teats and udders, farms using a towel for each cow were 56% and a towel for over 3 cows were 31% in SPC grade 1A. According to using-or-not grades of dried towels after washing udders, farms using a towel for each cow were 79% and a towel for over 3 cows were 21% in SPC grade 1A. 6. Farms doing teat-dipping before milking were 7(10%), not doing teat-dipping after milking, or doing sometimes were 9(12%), and doing right after milking were 57(77%). And farms doing teat-dipping after dry cows and before delivery were 21(28a ). Farms using bethadine as an antiseptic solution were 70(95%), 40 farms(59%) diluted it with water as weak as 5 to 10 times, and on drying cows 64 farms(87%) slowly did it more than 2 days. Grade 1A of SPC of farms doing teat-dipping at every milking was 38%, farms doing occasionally or not was 33%, and farms doing it right after milking was 37% and doing after milking more than 5 cows was 20%. Grade 1A of SPC among farms diluting bethadine 5 times and diluting 5 to 10 times with water were 36% and 33%, respectively, and Grade 3 of SCC were 35% and 32%, respectively. 7. Studies on nonlactating period medical treatment, as the cows were on dry, 54 farms treated with their own hands.73 farms(98%) had bovine mastitis treated for themselves. And on applying medicines against mastitis, 55 farmers chose them on the basis of their own experience, 42 farms(57%) were treated more than 3 days. 41 farms(55%) dumped away the mastitis infected milk separately, 24 farms(32%) were feeding and milking at the same time. 8. Fifty-six farms(76%) always washed and disinfected milking machines after milking. Farms using the milking machines at low, or variable vacuum pressures, or at the vacuum pressure, set at the moment of its installation were 31(42%), and farms that did not know pulsation ratio were 27(37%). Farms changing liners when they were torn 8(11%), 58 farms(78%) said they checked milking system when there were wrong with them, 31 farms(42%) changed milking hoses when they found out problems, and 42 farms(57%) cleaned vacuum and milking systems when they felt dirty. The SPC grade 1A of farms washing and sterilizing milking machines was 38% and farms only washing was 28%.

• Journal of Sericultural and Entomological Science
• /
• no.12
• /
• pp.37-45
• /
• 1970

The processing management forms of our country's filature factories in 1969 are summarized as follows. (1) About 80％ of total cocoon collection is made within 5 days involving peak day, and 10％ of cocoon collection is finished until 3 days before and after the peak day, (2) About 92％ of alive cocoons transported on unpaved road, and about 40％ of the cocoons purchased by all factories are loaded on trucks from common selling station which is far beyond 40km, therefore a new packing system of alive cocoons to drop the damage of cocoon qualities, should be taken. (3) 22％ of all factories in our. country have only low-temperature cocoon drying machine. Therefore the installment of hot-air cocoon drying machine is required urgently. (4) In view of cocoon qualities in our country, the grouping method of cocoon for reeling. taken by about 50％ of the factories at percent, which classify cocoons for reeling as high group (1,2,3,4 grades) and low group(5,6 grades), will have to be replaced by the method tat classify them high group (1,2 grades) middle group (3,4 grades), low group (5,6 grades). (5) The .ratio of cocoon assorting stood about 10％ in multi-ends reeling, about 15％ in automatic reeling, conclusively, the ratio of cocoon assorting for automatic reeling was higher tan that for multi-ends reeling. One person's ability for a day in cocoon assorting reaches to about 80-100kg. (6) Cocoon cooking condition requires the increase of the cooking time, the pressure and temperature used to be prolonged as much as the qualities of cocoons are material cocoon ior automatic and double cocoon machines are treated uncompletely. (7) Automatic silk reeling is being performed at 1-2$^{\circ}C$ lower in reeling water temperature and operated at about twice velocity. (8) The temperature and humidity of rereeling room stood at 25$^{\circ}C$, 67.2％ R.H and 32.3$^{\circ}C$, 51.9％ R.H of rereeling machine are showed, Average rereeling velocity is 233m/min and large reefs charged for one person are 7.5 reels and form of skein used in all factories is double skein. (9) About 73％ of water sources for filature used under-earth water. About 48％ of all filature factories in our country have not yet water purifying equipments. Installation of the equipment for these factories seems to be urgent, (10) Denier .balance, sizing reel, seriplane, are being used in most factories as self-inspection apparatus. (11) More than 90％ of the factories use the vacum tank in rereeling process and about 20％ of them use it in cocoon cooing process (12) Only 21％ of the factories use chemicals in filature process. About all them use "Seracol 100" in cocoon cooking process and "Seracol 500" in rereeling process, (13) Above survey results explain each all factories show large difference in the processing management. Therefore, it is believed that intercommunication through seminar or technical exchange will contribute to the production evaluation of cocoon in our filature industry.

• The Journal of Korean Society for School & Community Health Education
• /
• v.14 no.3
• /
• pp.27-40
• /
• 2013

Objectives: This study was conducted at a request for cooperation through an analysis of the effect of toothbrushing facilities at a public health center in Seongdong-gu. Also, with the aim of furnishing basic data to the proposal of a program for improving the ability of school aged children in managing oral cavities and developing a correct toothbrushing habit, the study conducted an investigation of how toothbrushing facilities affect change in the oral environment management ability and behavior of oral health care. Methods: From among elementary schools located in Seongdong-gu, Seoul the study selected A Elementary School where toothbrushing facilities were established and have been operated since 2008, B Elementary School in an adjacent region within the jurisdiction of Seongdong-gu where the demographic environment was similar among schools where toothbrushing facilities were newly established in 2012, and C Elementary School without toothbrushing facilities. Then the study was aimed at first grade students of the schools and an investigation was carried out from April to December 2012. Through a dental checkup, the study evaluated the teeth and periodontal health conditions, and a test of the oral environment management ability was undertaken three times. Regarding change of oral health care behavior, the study carried out a self-recording survey. Results: 1. Concerning decayed and filled tooth(dft) and decayed and filled surface (dfs), A Elementary School where toothbrushing facilities have been established and operated from the past showed a relatively lower decayed, missing, and filled teeth index than B Elementary School where toothbrushing facilities were established in 2012 or C Elementary School without toothbrushing facilities; however, there was no significant difference (p>0.05). For CPI, there was no significant difference by school; however, in looking into the difference between boy students and girl students, Code (0) was discovered higher in boy students whereas Code (1) was shown higher in girl students. 2. In the PHP index test in accordance with the existence of toothbrushing facilities before the installation of toothbrushing facilities, for A Elementary School where toothbrushing facilities have been established and operated from the past, the school recorded 4.28 points whereas B Elementary School where the facilities were established in 2012 recorded 3.51 points. Meanwhile C Elementary School without the facilities posted 4.30 points. Therefore there was a statistically significant difference according to the existence of toothbrushing facilities (p<0.05). 3. In a comparison of teeth health care behavior according to the existence of toothbrushing facilities, the number of answers that the respondent did not brush their teeth after lunch over the past one week was higher in B Elementary School and C Elementary School where there were no toothbrushing facilities. Regarding the average number of brushing after lunch for one week, it was discovered higher in A Elementary School (p<0.01). 4. In change of teeth health care behavior before and after the establishment of toothbrushing facilities, the case of answering that the respondents did not brush their teeth after lunch for one week increased more after establishment than before establishment. Also the average number of teeth brushings after lunch for one week decreased further after the establishment of toothbrushing facilities; however, it did not show a significant difference (p>0.05). One of the reasons that they do not brush their teeth, "the lack of a place", decreased significantly after establishment than before establishment (p<0.05), whereas the answer, "because their friends do not brush their tooth" increased greatly after establishment than before establishment; however, there was no significant difference (p>0.05). 5. In the comparison of the degree of knowledge about dental health according to the existence of toothbrushing facilities, the degree of knowledge about dental health was shown significantly higher in A Elementary School with toothbrushing facilities than in B Elementary School and C Elementary School where there were no toothbrushing facilities (p<0.01). Conclusions: Given the above results, it is difficult to attract change in behavior only with an environmental improvement; therefore, it is deemed necessary to develop an educational program that will help children to make a habit of oral health care not only through a school but also through a related policy and financial support of government organizations as well as the construction of the basis of a systematic and consistent cooperative system with relevant organizations.

• Economic and Environmental Geology
• /
• v.48 no.6
• /
• pp.509-523
• /
• 2015

This study introduces newly implemented geological well logs database for Jeju public water wells, built for a research project focusing on integrated hydrogeology database of Jeju Island. A detailed analysis of the existing 1,200 Jeju Island geological logs for the public wells developed since 1970 revealed six major indications to be improved for their use in Jeju geological logs DB construction: (1) lack of uniformity in rock name classification, (2) poor definitions of pyroclastic deposits and sand and gravel layers, (3) lack of well borehole aquifer information, (4) lack of information on well screen installation in many water wells, (5) differences by person in geological logging descriptions. A new Jeju geological logs DB enabling standardized input and output formats has been implemented to overcome the above indications by reestablishing the names of Jeju volcanic and sedimentary rocks and utilizing a commercial, database-based input structured, geological log program. The newly designed database structure in geological log program enables users to store a large number of geology, well drilling, and test data at the standardized DB input structure. Also, well borehole groundwater and aquifer test data can be easily added without modifying the existing database structure. Thus, the newly implemented geological logs DB could be a standardized DB for a large number of Jeju existing public wells and new wells to be developed in the future at Jeju Island. Also, the new geological logs DB will be a basis for ongoing project 'Developing GIS-based integrated interpretation system for Jeju Island hydrogeology'.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.628-636
• /
• 2018

Because large buoys are mainly made of steel, they are heavy and vulnerable to corrosion by sea water. This makes buoy installation and maintenance difficult. Moreover, vessel collision accidents with buoys and damage to vessels due to the material of buoys (e.g., steel) are reported every year. Recently, light buoys adopting eco-friendly and lightweight materials have come into the spotlight in order to solve the previously-mentioned problems. In Korea, a new lightweight buoy with a 7-Nautical Mile lantern adopting expanded polypropylene (EPP) and aluminum to create a buoyant body and tower structure, respectively, was developed in 2017. When these light buoys are operated in the ocean, the visibility and angle of light from the lantern installed on the light buoys changes, which may cause them to function improperly. Therefore, research on the performance of light buoys is needed since the weight distribution and motion characteristics of these new buoys differ from conventional models. In this study, stability estimation and motion analyses for newly-developed buoys under various environmental conditions considering a mooring line were carried out using ANSYS AQWA. Numerical simulations for the estimation of wind and current loads were performed using commercial CFD software, Siemens STAR-CCM+, to increase the accuracy of motion analysis. By comparing the estimated maximum significant motions of the light buoys, it was found that waves and currents were more influential in the motion of the buoys. And, the estimated motions of the buoys became larger as the sea state became worser, which might be the reason that the peak frequencies of the wave spectra got closer to those of the buoys.

• Cartoon and Animation Studies
• /
• s.28
• /
• pp.1-25
• /
• 2012

The rapid digitalization across all aspects of society since 1990 led to the digitalization of cartoons. As the medium of cartoons moved from paper to the web, a powerful visual culture emerged. An encounter between cartoons and multimedia technologies has helped cartoons evolve into a video culture. Today cartoons are no longer literate culture. It is critical to pay attention to cartoons as an "expanded fest" and as visual and video culture with much broader significance. In this paper, the investigator set out to diagnose the current position of cartoons changing in the rapidly changing digital age and talk about future directions that they should pursue. Thus she discussed cases of changes from 1990 when colleges began to provide specialized education for cartoons and animation to the present day when cartoon and Multimedia Comics fests exist in addition to the digitalization of cartoons. The encounter between new technologies and cartoons broke down the conventional forms of cartoons. The massive appearance of artists that made active use of new technologies in their works, in particular, has facilitated changes to the content and forms of cartoons and the expansion of character uses. The development of high technologies extends influence to the roles of appreciators beyond the artists' works. Today readers voice their opinions about works actively, build a fan base, promote the works and artists they favor, and help them rise to stardom. As artist groups of various genres were formed, the possibilities of new stories and texts and the appearance of diverse styles and world views have expanded the essence of cartoon texts and the overall cartoon system of cartoon culture, industry, education, institution, and technology. It is expected that cartoons and Multimedia Comics will continue to make a contribution as a messenger to reflect the next generation of culture, mediate it, and communicate with it. Today there is no longer a distinction between print and video cartoons. Cartoons will expand in every field through a wide range of forms and styles, given the current situations involving installation concept cartoons, blockbuster digital videos, fancy items, and characters at theme parks based on a narrative. It is therefore necessary to diversify cartoon and Multimedia Comics education in diverse ways. Today educators are faced with a task to bring up future generations of talents who are capable of leading the culture of overall senses based on literate and video culture by incorporating humanities, social studies, and new technology education into their creative artistic abilities.

• Journal of Korea Water Resources Association
• /
• v.53 no.9
• /
• pp.661-670
• /
• 2020

The water supply system has a wider installation range and various components of it than other infrastructure, making it difficult to secure stability against earthquakes. Therefore, it is necessary to develop methods for evaluating the seismic performance of water supply systems. Ground Motion Prediction Equation (GMPE) is used to evaluate the seismic performance (e.g, failure probability) for water supply facilities such as pump, water tank, and pipes. GMPE is calculated considering the independent variables such as the magnitude of the earthquake and the ground motion such as PGV (Peak Ground Velocity) and PGA (Peak Ground Acceleration). Since the large magnitude earthquake data has not accumulated much to date in Korea, this study tried to select a suitable GMPE for the domestic earthquake simulation by using the earthquake data measured in Korea. To this end, GMPE formula is calculated based on the existing domestic earthquake and presented the results. In the future, it is expected that the evaluation will be more appropriate if the determined GMPE is used when evaluating the seismic performance of domestic waterworks. Appropriate GMPE can be directly used to evaluate hydraulic seismic performance of water supply networks. In other words, it is possible to quantify the damage rate of a pipeline during an earthquake through linkage with the pipe failure probability model, and it is possible to derive more reasonable results when estimating the water outage or low-pressure area due to pipe damages. Finally, the quantifying result of the seismic performance can be used as a design criteria for preparing an optimal restoration plan and proactive seismic design of pipe networks to minimize the damage in the event of an earthquake.