• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.41-44
• /
• 2001

본 논문은 액정 Driver IC에 사용되a는 내부 기준 clock 발생 및 Voltage Converter에 boosting을 하기 위한 clock을 제공하는 Oscillator 설계 및 구현 하였다 LCD Driver IC에서 발생되는 Oscillator clock 은 고속의 clock신호는 필요로 하지 않으나 LCD display에 관련된 frame 주파수에 직접적인 영향을 주므로 중심 주파수 결정 및 duty비에 따른 주파수 제어가 매우 중요하다. 본 논문에서는 가변 duty를 적용하는 LCD system에 적용할 수 있는 가변 duty oscillator를 소개한다. Process는 0.35um, 12V공정을 사용하였다.

• ETRI Journal
• /
• v.8 no.3
• /
• pp.3-14
• /
• 1986

Currently, CIF is used widely as a common data base to represent IC layouts. The CIF2PG program is developed using C language to obtain electromask or mann 3000 PG file from the CIF input file. By obtaining the PG data, which can realize the actual mask layout, the construction of IC Design Automation System became possible using a general purpose computer.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.31.3-32
• /
• 2015

We present the physical properties of star forming regions in IC 10 obtained from Korea VLBI Network (KVN) 22GHz, the Submillimeter Array (SMA) CO, Very Large Array (VLA) HI 21cm, optical (U, B, V and H-alpha), and Spitzer infrared observations. IC 10 is a nearby (~0.7Mpc) irregular blue compact dwarf (BCD) galaxy which is likely to be experiencing an intense and recent burst of star formation. This nearby infant system showing high star formation rate but low metallicity (<20% of that of the Sun) provides critical environment of interstellar medium (ISM) under which current galactic star formation models are challenged. To make quantitative analysis of the ISM in the galaxy, we apply 2D cross-correlation technique to the multi-wavelength data for the first time. By cross-correlating different tracers of star formation, dust and gas phases in IC 10 in a two dimensional way, we discuss the gas properties and star formation history of the galaxy.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.2
• /
• pp.5-9
• /
• 2015

Thermal management becomes serious in 3D stacked IC because of higher heat flux, increased power generation, extreme hot spot, etc. In this paper, we reviewed the recent developments of thermal management for 3D stacked IC which is a promising candidate to keep Moore's law continue. According to experimental and numerical simulation results, Cu TSV affected heat dissipation in a thin chip due to its high thermal conductivity and could be used as an efficient heat dissipation path. Other parameters like bumps, gap filling material also had effects on heat transfer between stacked ICs. Thermal aware circuit design was briefly discussed as well.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.7
• /
• pp.756-759
• /
• 2014

DC/DC converters are commonly used to generate regulated DC output voltages with high-power efficiencies from different DC input sources. The converters can be applied in the regenerative braking of DC motors to return energy back to the supply, resulting in energy savings for the systems at periodic intervals. The fundamental converter studied here consists of an IGBT (Insulated Gate Bipolar mode Transistor), an inductor, a capacitor, a diode, a PWM-IC (Pulse Width Modulation Integrated Circuit) controller with oscillator, amplifier, and comparator. The PWM-IC is a core element and delivers the switching waveform to the gate of the IGBT in a stable manner. Display of the DC/DC converter output depends on the IGBT's changes in the threshold voltage and PWM-IC's pulse width. The simulation was conducted by PSIM software, and the hardware of the DC/DC converter was also implemented. It is necessary to study the fact that the output voltage depends on the duty rate of D, and to compare the output of experimental result with the theory and the simulation.

• Proceedings of the Ginseng society Conference
• /
• 1998.06a
• /
• pp.216-223
• /
• 1998

Cyclic nucleotide phosphodiesterases (PDEs) represent the unique enzymatic system degrddinf cAMP and cGMP which play a major role in the regulation of cell physiology. To investigate a possible molecular mechanism of ginsenosides, their activities were evaluated on PDEs which are recently described is new therapeutic targets. PDEs are classified into 7 families according to their genes (PDEI to PDE7) and are differently distributed in tissues. The IC50 values of ginsenosides were determined on PDEI to PDE 5 chromatographically isolatetl from bovine aorta. The results show that total ginseng saponin extract preferentially inhibits PDE 1 and PDE4 at concentrations nearby 200 ug/ml. Protopanaxadiol (PPD) fraction acts preferentially on PDE4 with and IC50 value of 100 nlml and inhibits also PDEI and PDE5 at 14 to 2 fold higher concentrations, respectively. Protopanaxatriol (PPT) fraction preferentially inhibits PDE 1 with and IC50 value of 170 ug/ml. Compound Rgl, originated from PPT fraction, and RC3 (5) represent the most active compounds towards PDE 1 with IC50 values around 80 UM. However Rg3 (R), epimer of Rgl (5) has no effect on the various PDEs tested, excepted on PDE3 rich is sligthly sensitive Compound Rbl, originated from PPD, acts on both PDEI and PDE4. It if two fold less active than Rgl and Rg3 (5) on PDEI. Taken together, these results mainly suggest that PDEI and PDE4 inhibitions could be a molecular mechanism which would participate in ginsenoside mechanisms, especially the effect of PPD on blood vessel and on CNS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1A
• /
• pp.16-23
• /
• 2008

In this paper, we propose a new code grouping interference cancellation(IC) receiver for multirate wideband code division multiple access(WCDMA) system based on orthogonal variable spreading factor(OVSF) code. The users are assigned different lengths of OVSF codes as a spreading code according to their data rates and divide the active users having same representative code split into a group for effective cancellation. The code grouping IC receiver performs cancellation between the groups first and cancellation within group. This proposed IC receiver can cancel the interferences using desired user's code information and then desired signals are detected. The results show that the large improvement in performance can be attained by groupwise IC scheme and we can make the effective systems compare to conventional ones.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.96.2-96.2
• /
• 2010

EV(Electric Vehicle) 차량에서 BMS(Battery Management System) 은 모터에 공급되는 고전압 배터리의 충전상태를 감지하여 VCU(Vehicle Control Unit)에 전송하게 된다. VCU에서는 배터리의 충전상태를 확인하여 모터 구동 전략을 수립하여 각 제어기에 전송하게 된다. 위와 같이 EV에서 배터리 충전상태를 정확하게 감지하지 못한다면, 모터 구동을 위한 전략 수립에 많은 제약이 따르게 된다. 정확한 배터리 충전 상태를 감지하기 위해서는 배터리 각 셀의 전압/전류/온도 등을 측정하여 연산에 의해 결정된다. 그 중 셀 전압 측정 방식은 Photomos relay를 이용한 방식으로 하드웨어적인 오차에 ${\pm}$수십mV보다 더둑 더 정밀하게 측정할 수 있는 방법이 없었다. 하지만, 셀 전압 측정 정밀도를 향상시키기 위해 신규로 개발된 battery monitoring IC를 이용한 BMS의 H/W 개발에 대해 설명할 것이다. 또한, Monitoring IC를 이용한 BMS의 셀 전압 측정 정밀도를 얼마나 개선시킬 수 있는지에 대해 연구하였다.

• Journal of Sensor Science and Technology
• /
• v.3 no.1
• /
• pp.54-60
• /
• 1994

In this paper, the multi-sensor signal processing IC is designed. It consists of an analog multiplexer for selection of multi-sensor signals, active filters for noise rejection and signal amplification, and a sample and hold circuit for interface with digital signal processing. By implementing these circuits with CMOS transistors, integration, low power dissipation and miniaturization of the total signal processing system have been made possible.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.644-646
• /
• 2000

According to the deregulations of governments in the world. the power industries of United State and European nations are proceeding remote meter reading and remote load control. But the core technology of multifunctional electronic meter implemented by programmable one-chip IC, which can be the right answer of all the power industy's efforts is now still under development in the advanced countries. Implementation of smallest size, lowest price single-phase meter with features which enable distribution automation such as bidirectional communication, Remote load control, remote meter reading, remote credit assigment. Prepayment billing system.