• Phonetics and Speech Sciences
• /
• v.6 no.4
• /
• pp.91-99
• /
• 2014

Speaking styles tend to have an influence on spectral characteristics of produced speech. There are not many studies on the spectral characteristics of speech because of complicated processing of too much spectral data. The purpose of this study was to examine spectral characteristics and formant bandwidths of English vowels produced by nine American males with different speaking styles: clear or conversational styles; high- or low-pitched voices. Praat was used to collect pitch-corrected long-term averaged spectra and bandwidths of the first two formants of eleven vowels in the speaking styles. Results showed that the spectral characteristics of the vowels varied systematically according to the speaking styles. The clear speech showed higher spectral energy of the vowels than that of the conversational speech while the high-pitched voice did the same over the low-pitched voice. In addition, front and back vowel groups showed different spectral characteristics. Secondly, there was no statistically significant difference between B1 and B2 in the speaking styles. B1 was generally lower than B2 when reflecting the source spectrum and radiation effect. However, there was a statistically significant difference in B2 between the front and back vowel groups. The author concluded that spectral characteristics reflect speaking styles systematically while bandwidths measured at a few formant frequency points do not reveal style differences properly. Further studies would be desirable to examine how people would evaluate different sets of synthetic vowels with spectral characteristics or with bandwidths modified.

• Journal of the Korean Chemical Society
• /
• v.27 no.6
• /
• pp.457-463
• /
• 1983

-Alkyl-2-hydroxyphenazine-5,10-dioxides were synthesized from hydroquinone, and alkyl benzofuroxanes which were previously obtained through five reaction steps starting from aniline. Infrared, nuclear mangnetic resonance spectrometry and elemental analysis were employed to identify the products concerned in the synthetic processes. It was observed that these alkylated phenazine oxides lowered the surface tension of water substantially. These derivatives showed stronger antimicrobial activity against both gram positive and negative microbes than 1-carboxyphenazine which had no alkyl side chain. It was also found that the antimicrobial activity of the phenazine compound increased when the nitrogen of the ring was bound to the oxygen atom.

• Korean Journal of Materials Research
• /
• v.27 no.9
• /
• pp.459-465
• /
• 2017

Nano-sized Zinc selenide (ZnSe) powder was successfully synthesized using Zn and Se precursors in a hydrothermal process. Temperature for the synthesis was varied from $95^{\circ}C$ to $180^{\circ}C$ to evaluate its influence on the microstructural properties of the synthetic particles. ZnSe powder thus fabricated was characterized using various analytical tools such as SEM, XRD, TEM and UV-Vis methods. Two types of ZnSe particles, that is, the precipitated particle and the colloidal particles, were identified in the analysis. The precipitated particles were around 100 nm in average size, whereas the average size of the colloidal particles was around 20 nm. The precipitated particles made at $150^{\circ}C$ and $180^{\circ}C$ were found to be a single phase of ZnSe; however, an inhomogeneous phase was obtained at the lower synthesis temperature of $95^{\circ}C$, suggesting that the temperature for the synthesis should be over $100^{\circ}C$. The precipitated particles were inactive in the UV-Vis absorption investigation, whereas the colloidal particles showed that absorptions occurred at 380 nm in the UV-Vis spectrum.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.5 no.1
• /
• pp.65-86
• /
• 2020

As conventional drug delivery system is being improved rapidly by target-based drug delivery system, finding suitable Drug Delivery System (DDS) for new drugs remains a challenge. Although there are many drug delivery vehicles in existence, a significant improvement is required to some DDS such as for local, implant-based treatments used for musculoskeletal infections. Many polymers have been considered for providing the improvement in DDS. Synthetic polymer, for example, has gained popularity for broad-spectrum physicochemical and mechanical properties. This article reviews the biomedical applications of Poly(TriMethylene Carbonate-co-Caprolactone) (PTMCC), which has attracted attention due to its biocompatibility, biodegradability and rubber-like properties. Its synthesis, physical properties, and degradation are also discussed here. Although it is relatively new in biomedical applications, it is readily usable for the fabrication of differing format of DDS of superior mechanical strength and degradation properties. The use of PTMCC is expected to increase in coming years as more is revealed about its potentials.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.2917-2921
• /
• 2014

Cerium-activated yttrium aluminate ($Y_3Al_5O_{12}:Ce^{3+}$) exhibiting a garnet structure has been widely utilized in the production of light emitting diodes (LEDs) as a yellow emitting phosphor. The commercialized yttrium aluminum garnet (YAG) phosphor is typically synthesized by a solid-state reaction, which produces irregular shape particles with a size of several tens of micrometers by using the top-down method. To control the shape and size of particles, which had been the primary disadvantage of top-down synthetic methods, we synthesized YAG:Ce nanoparticles with a diameter of 500 nm using a coprecipitation method under the atmospheric pressure without the use of template or special equipment. The precursor particles were formed by refluxing an aqueous solution of the nitrate salts of Y, Al, and Ce, urea, and polyvinylpyrrolidone (55 K) at $100^{\circ}C$ for 12 h. YAG:Ce nanoparticles were formed by the calcination of precursor particles at $1100^{\circ}C$ for 10 h under atmospheric conditions. The phase identification, microstructure, and photoluminescent properties of the products were evaluated by X-ray powder diffraction, scanning electron microscopy, absorption spectrum and photoluminescence analyses.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.12
• /
• pp.1877-1880
• /
• 2004

The simple and convenient determination of trace Hg(II) with its 2-mercaptobenzothiazole (MBT) complex in cetyltrimethylammonium bromide (CTAB) media has been studied. The UV-visible spectrum of Hg(II)-MBT complex in CTAB media had a good sensitivity and reproducibility. The Hg(II)-MBT complex in CTAB solution was very stable at pH 10.0 and could be quantitatively complexed if MBT were added to the sample solution more than 10 equivalent of Hg(II). The optimum concentration of CTAB was 0.001%. The calibration curve of Hg(II)-MBT complex with good linearity ($R^2$ = 0.9985) was obtained at the concentration range between $1.0{\times}10^-7$ and $1.0{\times}10^-5$ M in 0.001% CTAB media. The detection limit was $3.1{\times}10^-8$ M (6.2 ng m$L^{-1}$). Hg(II) in the synthetic samples and in the wastewater of the university's wastewater tank and the industrial wastewater tank could also be determined. Based on the experimental results, this proposed technique could be applied to the simple and convenient determination of trace Hg(II) in real samples.

• BMB Reports
• /
• v.29 no.6
• /
• pp.545-548
• /
• 1996

CA(1-8)ME(1-12), the CA-ME hybrid peptide of the amino terminal segments of cecropin A (CA) and melittin (ME), has been reported to have a broad spectrum and improved potency without a hemolytic property. In order to obtain new synthetic peptides with powerful antibacterial activity without hemolytic activity, several hybrid peptides were designed from the sequences of CA, ME, magainin 2, bombinin and lactoferricin. All hybrid peptides were constructed to form an amphipathically basic-flexible-hydrophobic structure and synthesized by the solid phase method. Their hemolytic activities against human red blood cells and antibacterial activities against both Gram-positive and Gram-negative bacteria were detennined. CA(1-8)MA(1-12), CA(1-8)BO(1-12), MA(10-17)ME(1-12) and LF(20-29)ME(1-12) showed comparable activities with broad spectra against both Gram-positive and Gram-negative bacteria relative to CA(1-8)ME(1-12) but without hemolytic properties. These hybrid peptides, therefore, could be useful as model peptides to design a novel peptide with improved antibacterial activity and study on structure-activity relationships of antimicrobial peptides.

• Elastomers and Composites
• /
• v.30 no.1
• /
• pp.20-31
• /
• 1995

The purpose of this study is to investigate the reinforcement of inorganic filler silica, treated by MDI about SBR vulcanizate. The characteristics of vulcanization, physical properties, surface properties and dynamic properties were investigated after mixing those silica with SBR and unmodified silica with SBR. In this experiment only the quantity of silica was variable. In the vulcanization characteristics tested by rheometer, S-series showed the fastest scorch $time(t_{10})$ and optimum cure $time(t_{90})$. And in test or tensile characteristics hardness, tensile strength, 100%, 300% modulus and elongation were all appeared in the order of M>S-series. The characteristic bonding of urea between unmodified silica and MDI could be confirmed in IR spectrum. The shapes of silicas treated chemically were observed by SEM. And the dispersion of the filler in the SBR composite was uniform. In the dynamic characteristics by the RDS, the order of elastic modulus G' values was as follows : M>S-series, and also the order of damping values was as follows : M>S-series.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.1
• /
• pp.35-39
• /
• 2016

In this research, we focused on the improvement of cy3 dye's characteristics for LCD color filter. Solubility and thermal stability are main characteristics of dyes for LCD color filter. We performed experiment to change counter cation of cy3 dyes with alkoxy substituent for these purposes. These cy3 dyes (1b~5b) were prepared through the synthetic procedure of three steps. The synthesized new cy3 dyes were charaterized by using NMR, FT-IR, UV/Vis spectroscopy, and TGA. These cy3 dyes showed purple color and maximum absorption wavelength (${\lambda}_{max}$) in the range of 578~590 nm in UV/Vis spectrum. We confirmed that solubility and thermal stability of cy3 dyes were dependent on the structure of counter cation. Cy3 dyes with alkoxy substituent have good solubility in organic solvents such as dichloromethane, methanol, and acetone. Especially, Cy3 dye with 4-nitrobenzyl counter cation (5b) gave excellent solubility characteristics.

• Korean Journal of Materials Research
• /
• v.16 no.10
• /
• pp.624-628
• /
• 2006

In this study, divalent europium-activated $NaCaPO_4$ green phosphor powders were prepared by the chemical synthetic method followed by heat treatment in reduced atmosphere, and the crystal structures, morphologies and photoluminescent properties of the powders were investigated by x-ray powder diffraction, scanning electron microscope and spectrometer for the first time. The effects of Ca/P and Na/Ca mole ratios on the final products were also investigated. The influences of input amount change of europium as the activator on the light emission intensity were studied, and the resulting concentration quenching phenomenon was observed. The optimized synthesis conditions obtained in this study were Ca/P mole ratio 1.2, Na/Ca mole ratio 3.0 and 4 mole%Eu. The peak wavelength was 505 nm for all the samples. The result of excitation spectrum measurement indicated that the excitation efficiency was high for the long-wavelength UV region. It was thus concluded that the samples prepared in this study can be successfully applied for the light-emitting devices such as LED excited with long-wavelength UV light sources.