• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.10-16
• /
• 1999

In this paper, we propose a concatenation-based speech synthesizer using CVC(consonant-vowel-consonant) speech segments extracted from an undesigned continuous speech corpus. Natural synthetic speech can be generated by a proper modelling of coarticulation effects between phonemes and the use of natural prosodic variations. In general, CVC synthesis unit shows smaller acoustic degradation of speech quality since concatenation points are located in the consonant region and it can properly model the coarticulation of vowels that are effected by surrounding consonants. In this paper, we analyze the characteristics and the number of required synthesis units of 4 types of speech synthesis methods that use CVC synthesis units. Furthermore, we compare the speech quality of the 4 types and propose a new synthesis method based on the most promising type in terms of speech quality and implementability. Then we implement the method using the speech corpus and synthesize various examples. The CVC speech segments that are not in the speech corpus are substituted by demonstrate speech segments. Experiments demonstrate that CVC speech segments extracted from about 100 Mbytes continuous speech corpus can produce high quality synthetic speech.

• Journal of KIISE
• /
• v.44 no.9
• /
• pp.986-991
• /
• 2017

In this paper, we present a method for synthesizing imperative programs from input-output examples. Given (1) a set of input-output examples, (2) an incomplete program, and (3) variables and integer constants to be used, the synthesizer outputs a complete program that satisfies all of the given examples. The basic synthesis algorithm enumerates all possible candidate programs until the solution program is found (enumerative search). However, it is too slow for practical use due to the huge search space. To accelerate the search speed, our approach uses code optimization and avoids unnecessary search for the programs that are syntactically different but semantically equivalent. We have evaluated our synthesis algorithm on 20 introductory programming problems, and the results show that our method improves the speed of the basic algorithm by 10x on average.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.326-329
• /
• 2016

UAVs(Unmanned Aerial Vehicle) can be used in variant fields fornot only combat, but also recon, observation and exploration. Moreover, UAVs capacity can be expanded to impossible missions for existing surveillance system such as SAR(Synthetic Aperture Radar) technology that collecting images from all weather conditions. In recent days, with development of highly efficient IC and lightened system technology, there are significant increase of researches and demands to make SAR sensor as a payload of UAV. Therefore, this paper contains development process and results of small signal generator and RF device as a core module of SAR system based on the digital device of DDS.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.4
• /
• pp.707-714
• /
• 2012

After a single-stage, second-order, multiple-feedback ${\Delta}-{\Sigma}$ modulator and a two-stage, second-order MASH ${\Delta}-{\Sigma}$ modulator were analyzed and simulated using Simulink and Matlab and their characteristics were compared, the following result was obtained: 1) The two ${\Delta}-{\Sigma}$ modulators do not have group delay distortion. 2) The characteristics of the noise shaping are nearly identical. As a result of the noise shaping, the power spectral densities have slope of 40 dB/dec. 3) There was no spurious tone. 4) The input range of the two modulators is from -1 to +1 in common. 5) Because the output of the two-stage MASH modulator is 2-bits (4-levels), design of frequency dividers and charge pumps of PLL are more demanding.

• ETRI Journal
• /
• v.36 no.3
• /
• pp.352-360
• /
• 2014

This paper presents a 900 MHz zero-IF RF transceiver for IEEE 802.15.4g Smart Utility Networks OFDM systems. The proposed RF transceiver comprises an RF front end, a Tx baseband analog circuit, an Rx baseband analog circuit, and a ${\Delta}{\Sigma}$ fractional-N frequency synthesizer. In the RF front end, re-use of a matching network reduces the chip size of the RF transceiver. Since a T/Rx switch is implemented only at the input of the low noise amplifier, the driver amplifier can deliver its output power to an antenna without any signal loss; thus, leading to a low dc power consumption. The proposed current-driven passive mixer in Rx and voltage-mode passive mixer in Tx can mitigate the IQ crosstalk problem, while maintaining 50% duty-cycle in local oscillator clocks. The overall Rx-baseband circuits can provide a voltage gain of 70 dB with a 1 dB gain control step. The proposed RF transceiver is implemented in a $0.18{\mu}$ CMOS technology and consumes 37 mA in Tx mode and 38 mA in Rx mode from a 1.8 V supply voltage. The fabricated chip shows a Tx average power of -2 dBm, a sensitivity level of -103 dBm at 100 Kbps with PER < 1%, an Rx input $P_{1dB}$ of -11 dBm, and an Rx input IP3 of -2.3 dBm.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.2
• /
• pp.15-22
• /
• 2001

Radiocarbon ($^{14}C$) and tritium in water have been applied to hydrogeology as a tool for dating of groundwater. The long half-life of $^{14}C$(5,730 years) makes it useful for evaluation of residence time of groundwater, However, the $^{14}C$ has not been applied to groundwater studies in Korea, owing to the absence of preparation line for $^{14}C$ analysis. By this time $^{14}C$ of groundwater has been analyzed mainly using benzene synthesizer, which is so complicate and time-consuming that has been is limitedly applied to hydrogeology. Recently, the direct $CO_2$ absorption method for $^{14}C$ analysis was developed and introduced to KAERI for the evaluation of domestic groundwater system. The results of $^{14}C$ in groundwater would be usefully applied to hydrogeological studies such as the well understanding of groundwater flow system in depth. The reliability of our $^{14}C$ data was confirmed by inter-comparison with the qualified international isotope laboratory.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1349-1359
• /
• 1998

In this paper, presented is the result of a digital implementation of a FM stereo composite signal generator. The chip utilizing DDFS(Direct Digital Frequency Synthesizer architecture is implemented using $1.0\mu\textrm{m}$ CMOS gate-array technology thereby replacing analog componentry. To verify the process of generating composite signals a conventional logic simulation method was used. The processed chip was mounted on an evaluation PCB to test and analyze to signals. According to the measurement result obtained by using a 12-bit DAC, the digital FM composite signal generator produces a 74DB spectrally pure signal over its entire tuning range, which is superior to that of analog counterpart by 14dB in it spectral reponse. And further enhancements of the spectral response is expected to be achieved by using a high resolution digital to analog converter, such as a 16-bit DAC. The resulting signals is superior to the signal of the analoy circuitry typically used, in major characteristics such as S/N ratios, accuracy, tuning stability, and signal seperation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.558-565
• /
• 2013

In this paper, modeling and simulation for performance analysis of high resolution SAR system has been carried out in the time, frequency and numeric domain using ADS Ptolemy simulation tool of Agilent corporation. SAR system consists of antenna, controller and transceiver. Error parameters affecting SAR system performances have been defined, modeled and simulated such as phase noise of frequency synthesizer, amplitude and phase characteristic of TWTA, sampling frequency of waveform generator and I/Q imbalance. Finally, the development requirements of SAR system based on the impulse response function have been derived.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.48-56
• /
• 2006

This paper studies particularly applicable method for sensorless PM BLDC motor drive system. The waveform of the motor internal voltages(or back emf) contains a fundamental and higher order frequency harmonics. Therefore the third harmonic component is extracted from the stator phase voltage. The resulting third harmonic signal keeps a constant phase relationship with the rotor flux for any motor speed and load condition. Also because of low resolution of estimated signal obtained by the proposed sensorless algorithm, to improve the wide range of speed response characteristic more exactly, we propose the rotor position signal synthesizer using PLL circuit based on estimated signals. Some experimental results are provided to demonstrate the validity of the proposed control method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.1
• /
• pp.80-86
• /
• 2010

This paper describes the development result of S-band Transmitter of STSAT-3 by satellite research center(SaTReC), KAIST. STSAT-3 has two kinds of communication channels, S- band for Telemetry & Command and X-band for mission payload. S-band Transmiiter(STX) consist of modulator, frequency synthesizer, power amp and DC/DC converter. The modulation scheme of STX is FSK(Frequency Shift Keying). The interface between spacecraft OBC and STX is RS-422. The STX is based on modular design. The RF output power of STX is 1.5W(31.7dBm) and BER of STX is under 1E-5. The Test of STX is completed successfully such as functional Test and environmental(vibration, thermal vacuum) Test.