• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.292-294
• /
• 2008

최근 환경 파괴와 에너지 고갈에 대한 문제들이 사회의 큰 문제로 대두 되면서 풍력발전의 중요성이 증가하고 있다. 본 논문에서는 LabVIEW를 이용하여 이더넷(Ethernet) 환경에서의 풍력발전 원격감시 제어시스템을 구현하였다. 제안된 원격감시 제어시스템은 풍력발전 시스템의 MCU와 W5100의 SPI(Serial Peripheral Interface)를 통한 이더넷 통신용 하드웨어를 구축하였으며, NI사의 LabVIEW를 이용하여 서버상의 HMI(Human Machine Interface) 소프트웨어를 구현하였다. 본 연구의 실험을 위해 영구자석형 동기 발전기(PMSG:Permanent Magnet Synchronous Generator)를 이용하여 풍력발전 시스템 모델을 구현하고 이를 이용하여 원격감시 제어시스템의 성능을 검증하였다.

• Journal of the Korea Society for Simulation
• /
• v.10 no.4
• /
• pp.21-30
• /
• 2001

In this paper, EMI measurement, the STGU simulation being conducted, filter design, its characteristics, and its implementation to the PCB, and finally test results are discussed. When the low pass filter was implemented within the STGU, the power of EMI decreased more than 20dBm. Finally, when TE and MTIE, two important quality measure in synchronous reference clock, was assessed, ITU-T G813 requirement was satisfied. EMI(Electromagnetic Interface) is a measure of electomagnetic radiation from equipment in the range of 10KHz to 3GHz, and can cause unexpected reactions of electronics/electrical equipment. In this study, for safe and stable communication operation, a STGU (System Timing Generation Unit), which is a 2.5G SDH System and a major EMI source, was employed to simulate electromagnetic interface. Using Open-Site test, the power of fundamental frequency of EMI of interest and its harmonics were measured. Also, a low pass filter at cut-off frequency of 2GHz was specifically designed for this study to minimize the effect of EMI between electronic components.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.394-396
• /
• 2007

In this paper proposed to neural network PI self-tuning direct controller using Error back propagation algorithm. Proposed controller applies to speed controller and current controller. Also, this built up the interface environment to drive it simply and exactly in any kind of reference, environment fluent and parameter transaction of PMSM. Neural network PI self-tuning simulator using Visual C++ and Matlab Simulation is organized to construct this environment, Built up interface has it's own purpose that even the user who don't have the accurate knowledge of Neural network can embody operation characteristic rapidly and easily.

• Journal of Energy Engineering
• /
• v.11 no.3
• /
• pp.194-202
• /
• 2002

In this paper, we simulate the power system transient stability of Kwang Yang steel works using object-oriented programming (OOP). OOP is a more flexible method than procedural programming. There are several advantages in dynamic system simulation using OOP, The maintenance and repair of program are easy because it is sufficient to modify necessary parts which correspond to the change of system without overall change of program. We have implemented a graphical man-machine interface (MMI) that can be used draw one-line system diagram and analyze power flow and dynamic stability. The implemented MMI also provide a graphical viewer that display dynamic stability analysis results by mouse event handling. The proposed method have been applied to Kwang Yang steel works network for on-line dynamic stability analysis. The dynamic behaviour of 17 synchronous generators and 25 synchronous motors has been studied in the Kwang Yang network.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.9-14
• /
• 1999

In this paper, a method of one line transmission of 622Mbps to interface a low speed part with a high speed part is introduced instead of H-BUS method of the 10 line transmission of 77.76Mbps in the 10Gbps optical transmission system. For this method, a reframing method to align the received data of 622Mbps transmission to STM(Synchronous Transfer Mode)-64 frame of SDH(Synchronous Digital Hierarchy) is described. Reframing is designed with VHDL and applied in the 10G-S4 ASIC of T14U board of 10Gbps optical transmission system.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.12
• /
• pp.2985-2995
• /
• 1997

In this paper, we proposed the "synchronous & asynchronous distance education system" which is able to interact among teachers and students for open education in cyberspace, and it is based telecommunication technology and multimedia technology. Specially, This system gets rid of the nufamiliarity and inconvenient feeling during the distance education. Also it supports the mediation of floor mode, for a group lecture and supports the synchronous mode for face-to-face effective and asynchronous mode for self-learning. The asynchronous mode has the down load function and the consultant mode (between teacher and student). The element technologies of this system consists of application sharing technique, whiteboard, various video window display, audio support, user interface, environment setup, session management, access control, network control and media control for collaborative distance education.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.45-52
• /
• 2002

EMI(Electromagnetic Interface) is a measure of electomagnetic radiation from equipment in the range of 10KHz to 3GHz, and can cause unexpected reactions of electronics/electrical equipment. In this study, for safe and stable communication operation, a STGU(System Timing Genetation Unit), which is a 2.5Gbps SDH System and a major EMI source, was employed to simulate electromagnetic interface. In On-Site test, the power of fundamental frequency of EMI of interest and its harmonics were measured. Also, a low pass filter at cut-off frequency of 2GHz was specifically designed to minimize the effect of EMI between electronic components. When the low pass filter was implemented within the STGU, the power of EMI decreased more than 20dBm. Finally, when TIE and MTIE, two important quality measure in synchronous reference clcok, was assessed, ITU-T G8l3 requirements are satisfied.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.9
• /
• pp.47-54
• /
• 2000

We designed asynchronous event logic library with 0.25um CMOS technology and interface chip for heterogeneous system with high-speed asynchronous FIFO operating at 1.6GHz. Optimized asynchronous standard cell layouts and Verilog models are designed for top-down design methodology. A Method for mitigating a design bottleneck when it comes to tolerate clock skew is described. This communication scheme using clock control circuits, which is used for the free of synchronization failures, is analyzed and implemented. With clock control circuit and FIFO, high-speed communication between synchronous modules operating at different clock frequencies or with asynchronous modules is performed. The core size of implemented high-speed 32bit-interface chip for heterogeneous system is about $1.1mm{\times}1.1mm$.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.268-270
• /
• 2005

Users using mobile terminal want to receive seamless service anywhere, anytime. In order to satisfy user's needs a communication between heterogeneous networks has to provide seamless service. Now a commercialized IMT-2000 is used with both WCDMA and CDMA together. Because asynchronous WCDMA and synchronous CDMA use different technology in their interface and traffic management, communication between the two networks can become disconnected. IP a mobile terminal swerves from the handoff area before handoff completion, packet loss and service disconnection will happened. In this paper, we propose a handoff scheme to provide seamless service, when mobile terminal moves from the WCDMA to the CDMA. And we prove that the proposed handoff scheme provide seamless service.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.354-362
• /
• 2008

This paper presents the new method of power system transient stability simulation, which combines the desirable features of both the time domain technique based on OOP(Object-oriented Programming) and the direct method of transient stability analysis using detailed generator model. OOP is an alternative to overcome the problems associated with the development, maintenance and update of large software by electrical utilities. Several papers have already evaluated this approach for power system applications in areas such as load flow, security assessment and graphical interface. This paper applied the object-oriented approach to the problem of power system dynamics simulation. The modeling method is that each block of dynamic system block diagram is implemented as an object and connected each other. In the transient energy method, the detailed synchronous generator model is so-called two-axis model. For the excitation model, IEEE type1 model is used. The developed mothed was successfully applied to New England Test System.