• Journal of Power Electronics
• /
• v.4 no.3
• /
• pp.180-187
• /
• 2004

This paper proposes a new control strategy for the dynamic voltage restorer (DVR). It is based on a synchronous PI decoupling control strategy which features fast response time and low steady state error. Therefore, the proposed control strategy produces faster action time against voltage sag and guarantees more than enough compensation for reduced supply voltage. Experimental results, implemented with the TMS320C3${\times}$DSP control unit, are shown to validate the effectiveness of the proposed control strategy.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.1019-1025
• /
• 2016

This paper proposes a parallel reduced-order square-root unscented Kalman filter for state estimation of a sensorless permanent-magnet synchronous motor. The appearance of an unscented Kalman filter is caused by the linearization process error between a real system and classical Kalman model. The unscented transformation can make a more accurate Kalman model. However, the complexity is its main drawback. This paper investigates the design and implementation of the proposed filter with Potter and Carlson square-root form. The proposed parallel reduced-order square-root unscented Kalman filter reduces memory and code size, and improves numerical computation. And the performance is not significantly different from the unscented Kalman filter. The experimentation is performed for the verification of the proposed filter.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.417-420
• /
• 2002

In this paper, we implemented a SDH synchronous network system based on ITU-T recommendation G.707 - Network node interface for the synchronous digital archy(SDH). For the system, we used signal processing SDH ASIC, and designed a FPGA_Control chip for various signal control and a FPGA_Alignment cllip for data alignment using YHDL(Very high speed integrated circuit Hardware Description Language). For system monitoring, an operation system was developed using ANSI C and executed in CPU (Motorola MPC-860). The system was evaluated by using ANT-20 for data transmission error defection, jitter detection, pointer chocking, and overhead determination.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.2125-2133
• /
• 2018

To achieve high performance speed regulation, a robust adaptive speed controller is proposed for the permanent magnet synchronous motor (PMSM) subject to parameter uncertainties and input saturations in this paper. A nonlinear adaptive control is introduced to compensate the PMSM speed tracking errors due to uncertainties, disturbances and control input saturation constraints. By combining the adaptive control and the nonlinear robust control based on the interconnection and damping assignment (IDA) strategy, a new robust adaptive control is designed for speed regulation of PMSM. Stability and robustness of the closed-loop control system involved with the constrained control inputs rather than unconstrained control inputs are validated. Simulations for PMSM control in the presence of uncertainties and saturations nonlinearities show that the proposed approach is effective to regulate speed, and the average tracking error using the proposed approach is at least 32% smaller than the compared methods.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.12
• /
• pp.1379-1387
• /
• 2011

A PID-feedforward controller and Robust Internal-loop Compensator (RIC) based on reinforcement learning using random variable sequences are provided to auto-tune parameters for each controller in the high-precision position control of PMLSM (Permanent Magnet Linear Synchronous Motor). Experiments prove the well-tuned controller could be reduced up to one-fifth level of tracking errors before learning by reinforcement learning. The RIC compared to the PID-feedforward controller showed approximately twice the performance in reducing tracking error and disturbance rejection.

• Journal of Digital Contents Society
• /
• v.4 no.2
• /
• pp.139-146
• /
• 2003

This paper explains the design and implementation of the ERA(Error Recovery Agent). ERA is a system that is suitable for detecting, sharing and recovering software error based on multimedia distance education system. This system consists of an ED, ES, and ER. ED detects an error by hooking techniques. ES is an agent which is an error sharing system for distributed multimedia distance education system. We propose how an error application can be treated and recovered as 'media' in a multimedia collaborative environment.

• The Journal of Korea Robotics Society
• /
• v.5 no.4
• /
• pp.309-317
• /
• 2010

This paper proposes an efficient measurement system for the velocity and direction of the wind using the dual rotor wind power generator in vessel. Conventional digital measurement system recognizes the direction and the velocity of the wind using the electric compass or synchronous motor and Vane probe method using hall sensors. But each system has its own short-comings: the synchronous motor has a larger measurement error than the magnetic compass and magnetic compass is weak for the external disturbances such as fluctuation of the vessel. To compensate these short-comings, this paper proposes a new compensation algorithm for the fluctuation errors according to the external interference and the unexpected movement of the vessel along the roll and pitch directions. The proposed system is implemented with the dual compasses and a synchronous motor. The proposed independent power generation system can be operated by itself and can raise the efficiency of the wind power generation systems of 30 ~ 400 W installed along the vertical and horizontal axes. The proposed system also realizes the efficient and reliable power production system by the MPPT algorithm for the real-time recognition of the wind direction and velocity. An advanced switching algorithm for the battery charging system has been also proposed. Effectiveness of the proposed algorithm has been verified through the real experiments and the results are demonstrated.

• Journal of Biomedical Engineering Research
• /
• v.29 no.5
• /
• pp.384-391
• /
• 2008

For use in the guide system for the people who are visually impaired, an obstacle searching device using synchronous ultrasonic wave emission was proposed and developed. Generally, the conventional obstacle detection methods use the ultrasonic distance measuring device with successive scan method. However, the scan method causes a theoretical error and it couldn't estimate accurate obstacle distances. The proposed synchronous firing method use the plural number of ultrasonic sensors which emit ultrasonic wave simultaneously and estimate the distance to the closest obstacle relatively accurately. We analytically analyzed the errors of the conventional and proposed methods and compared the quantitative differences of the errors. The differences verified by obstacle search experiments. Using the proposed ultrasonic wave synchronous firing method, 3 dimensional obstacle location estimating device was designed and implemented. The results of the 3 dimensional obstacle detecting experiments showed the proposed method had good performances and it would be sufficiently use in the guide system for the people who are visually impaired.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.532-540
• /
• 2014

It is necessary to measure the current of rotor for controlling the active and reactive power generated by the stator side of the doubly fed induction generator (DFIG) system. There are offset and scaling errors in the current measurement. The offset and scaling errors cause one and two times current ripples of slip frequency in the synchronous reference frame of vector control, respectively. This paper proposes a compensation method to reduce their ripples. The stator current is variable according to the wind force but the rotor current is almost constant. Therefore input of the rotor current is more useful for a compensation method. The proposed method adopts the synchronous d-axis current of the rotor as the input signal for compensation. The ripples of the measurement errors can be calculated by integrating the synchronous d-axis stator current. The calculated errors are added to the reference current of rotor as input of the current regulator, then the ripples are reduced. Experimental results show the effectiveness of the proposed method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.417-418
• /
• 2006