• 한국태양에너지학회 논문집
• /
• 제23권3호
• /
• pp.29-35
• /
• 2003

Generator for wind power can be either synchronous or asynchronous (induction) types. Induction and synchronous generators behave in a different way when subjected to severe faults. Induction generators does not have an angle stability limit and short circuit in the neighborhood of an Induction generator causes the demagnetization of the machine when the fault is cleared, the voltage raises slowly, while the grid contributes with reactive power to the generator and the magnetic flux recovers. On the other hand in the synchronous generators the recovery of the voltage is immediate, since the excitation of the rotor angle comes from an independent circuit. This paper shows the result of the transient state analysis in the network connected to wind generation system Several case studies have been conducted to determine the effect of the clearing time of a fault on the network stability. It has been found that the critical clearing time can be as low as 61ms in the case of induction generator compared to 370ms in the case of synchronous generator.

• ETRI Journal
• /
• 제39권4호
• /
• pp.582-591
• /
• 2017

To address the wire complexity problem in large-scale globally asynchronous, locally synchronous systems, a current-mode ternary encoding scheme was devised for a two-phase asynchronous protocol. However, for data transmission through a very long wire, few studies have been conducted on reducing the long propagation delay in current-mode circuits. Hence, this paper proposes a current steering logic (CSL) that is able to minimize the long delay for the devised current-mode ternary encoding scheme. The CSL creates pulse signals that charge or discharge the output signal in advance for a short period of time, and as a result, helps prevent a slack in the current signals. The encoder and decoder circuits employing the CSL are implemented using $0.25-{\mu}m$ CMOS technology. The results of an HSPICE simulation show that the normal and optimal mode operations of the CSL achieve a delay reduction of 11.8% and 28.1%, respectively, when compared to the original scheme for a 10-mm wire. They also reduce the power-delay product by 9.6% and 22.5%, respectively, at a data rate of 100 Mb/s for the same wire length.

• 한국항공우주학회지
• /
• 제48권11호
• /
• pp.873-880
• /
• 2020

본 논문은 스트랩다운 탐색기 측정치와 INS 정보를 이용하여 시선각속도를 추정하는 유도필터 설계에 대해서 다룬다. 제안하는 유도필터는 탐색기 측정치와 유도탄 자세로부터 획득 가능한 시선각과 표적의 위치와 유도탄과의 상대 위치를 측정치로 하고 있으며, 주기 및 동기가 맞지 않는 두 센서의 출력을 사용하기 위해 비동기 필터를 기반으로 하고 있다. 제안한 방법을 통해 시간지연이 큰 탐색기 측정치를 사용함으로써 생길 수 있는 기생루프에 대한 영향을 줄이고 추정성능을 향상시킬 수 있다.

• 대한전자공학회논문지SD
• /
• 제41권10호
• /
• pp.23-29
• /
• 2004

본 논문에서는 SRAM을 내장하는 시스템형 집적회로에서 싱글 포트 SRAM을 이용하여 듀얼 포트 SRAM으로 동작하는 구조를 제안한다. 외부 호스트는 내부 SRAM에 데이터를 자유로이 읽거나 쓸 수 있고, 내부 SRAM은 또 다른 외부의 회로부에 저장 데이터의 전달이 가능하면서 호스트와는 동기신호가 없는 구조 즉, 어싱크로너스 듀얼 포트 SRAM의 동작을 하는데, 싱글포트 SRAM을 이용하여 어싱크로너스 듀얼 포트로동작을 하도록 내부의 기능부를 설계하여 듀얼 포트 SRAM에 비해 적은 면적을 차지하는 구조를 제안하고 0.35um CMOS공정으로 칩을 제작하고 검증하였다. 결과로 20% 면적 감소와 20% 전력소비의 효과를 확인하였다.

• Journal of Communications and Networks
• /
• 제5권2호
• /
• pp.150-156
• /
• 2003

In this paper, an uplink MC-CDMA system incorporating multiuser detection and smart antennas has been considered. The performance of asynchronous as well as synchronous system is studied over a correlated Rayleigh multipath slow fading channel. A simplified array-processing algorithm suitable for slow fading situation is investigated to overcome the heavy computational complexity associated with Eigen solutions. The effect of variable data rate in the system performance is considered and effectiveness of antenna array to handle high data rate is discussed. A brief investigation on the system performance degradation due to correlated channel is also carried out. Based on the extensive simulation carried out, the performance of the asynchronous uplink system is found dramatically improved with antenna array and multiuser detection. Asynchronicity and channel correlation are found to affect the system performance significantly. The investigated simpli- fied algorithm produces similar results as Eigen solutions in slow fading situation with much reduced complexity.

• Journal of Information Technology Applications and Management
• /
• 제9권1호
• /
• pp.61-70
• /
• 2002

There are a lot of shopping malls in Internet and most of consumers want to buy good goods in cheap price through the shopping malls. To support them, many sites for price comparison are constructed. But man or woman search many shopping malls and insert their price informations into database that the price comparison sites own. To overcome this disadvantage, virtual shopping malls are builded. These virtual shopping malls are connected and cooperated a lot of affiliated existing shopping malls for the cheapest price information. But, these virtual shopping mall are connected to those existing shopping malls in synchronous. So If they are connected to many existing shopping malls, we have to wait long time because of searching for many existing shopping malls. In this paper, we designed and implemented a virtual shopping mall that connect to many existing shopping malls in asynchronous. For a asynchronous communication between this virtual shopping mall and many existing shopping malls, we used JMS (Java Message Service) that is a standard Java API for MOM (Message-Oriented Middleware).

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1968-1971
• /
• 2002

In this paper, we have presented a test- ing method for a kind of asynchronous circuits. Tar- get circuit model is the 3D machine that is one of the most successful implementation of extended burst-mode (XBM) machines. We present a high-level test generation method for the 3D machine using the specification of the circuit. We also present a gate-level test pattern generation method using a synchronous test pattern generator. Experimental results show that the combination of the above two methods achieves high fault coverage over 3D machines and saves test generation time.

• Bulletin of the Korean Chemical Society
• /
• 제24권9호
• /
• pp.1345-1350
• /
• 2003

Principal component analysis based two-dimensional (PCA-2D) correlation analysis is applied to FTIR spectra of polystyrene/methyl ethyl ketone/toluene solution mixture during the solvent evaporation. Substantial amount of artificial noise were added to the experimental data to demonstrate the practical noise-suppressing benefit of PCA-2D technique. 2D correlation analysis of the reconstructed data matrix from PCA loading vectors and scores successfully extracted only the most important features of synchronicity and asynchronicity without interference from noise or insignificant minor components. 2D correlation spectra constructed with only one principal component yield strictly synchronous response with no discernible a asynchronous features, while those involving at least two or more principal components generated meaningful asynchronous 2D correlation spectra. Deliberate manipulation of the rank of the reconstructed data matrix, by choosing the appropriate number and type of PCs, yields potentially more refined 2D correlation spectra.

• 한국정보처리학회논문지
• /
• 제6권5호
• /
• pp.1203-1211
• /
• 1999

Checkpointing is the one of fault-tolerant techniques to restore faults and to restart job fast. Checkpointing algorithms in distributed systems have been studied for many years. These algorithms can be classified into synchronous Checkpointing algorithms and asynchronous Checkpoiting algorithms. In this paper, we propose an independent Checkpointing algorithm that has a minimum Checkpointing counts equal to periodic Checkpointing algorithm, and relatively short rollback distance at faulty situation. Checkpointing count is directly related to task completion time in a fault-free situation and short rollback distance is directly related to task completion time in a faulty situation. The proposed algorithm is compared with the previously proposed asynchronous Checkpointing algorithms using simulation. In the simulation, the proposed Checkpointing algorithm produces better results than other algorithms in terms of task completion time in fault-free as well as faulty situations.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2022년도 춘계학술발표대회
• /
• pp.272-275
• /
• 2022

The federated learning can be utilized in conjunction with the blockchain technology to provide good privacy protection and reward distribution mechanism in the field of intelligent IOT in edge computing scenarios. Nonetheless, the synchronous federated learning ignores the waiting delay due to the heterogeneity of edge devices (different computing power, communication bandwidth, and dataset size). Moreover, the potential of smart contracts was not fully explored to do some flexible design. This paper investigates the fusion application based on the FLchain, which is the combination of asynchronous federated learning and blockchain, discusses the communication optimization, and explores the feasible design of smart contract to solve some problems.