• 제목/요약/키워드: Symmetric Sequence

검색결과 103건 처리시간 0.018초

MUIO와 shortest path를 이용한 개선된 시험순서생성 (Test sequence generation using MUIO and shortest paths)

  • 정윤희;홍범기
    • 한국통신학회논문지
    • /
    • 제21권5호
    • /
    • pp.1193-1199
    • /
    • 1996
  • This paper introduces an algorithm which uses MUIO and the shortest paths to minimize the length of test sequence. The length of test sequence is equal to the total number of the edges in a symmetric test graph $G^{*}$. Therefore, it is important to make a $G^{*}$ with the least number of the edges. This algorithm is based on the one proposed Shen[2]. It needs the complexity to make shortest paths but reduces the thest sequence by 1.0~9.8% over the Shen's algorithm. and this technique, directly, derives a symmetric test graph from an FMS.

  • PDF

Synchronous All-Optical Code-Division Multiple-Access Local-Area Networks with Symmetric Codes

  • Lam, Pham Manh;Praepanichawat, Chanikarn
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -2
    • /
    • pp.1109-1112
    • /
    • 2002
  • A non-coherent synchronous all-optical code-division multiple-access (CDMA) network is proposed. In this network, symmetric codes derived from prime sequence codes are used. We present the construction of symmetric codes and show that the pseudo-orthogonality of the new codes is the same as that of the original prime-sequence codes while the cardinality of the new codes is larger than that of the prime sequence codes and the modified prime codes in the same field GF(p). Therefore, an optical CDMA LAN using symmetric codes can have a larger number of potential subscribers. The new codes allow designing fully programmable serial all-optical transmitter and receiver suitable for low-loss, high-capacity, optical CDMA LANs. It is also shown that compared to systems using modified prime codes the proposed system can achieve better BER performance for low received chip optical power.

  • PDF

Effect of stacking sequence on thermal stresses in laminated plates with a quasi-square cutout using the complex variable method

  • Chaleshtari, Mohammad H. Bayati;Khoramishad, Hadi
    • Structural Engineering and Mechanics
    • /
    • 제77권2호
    • /
    • pp.245-259
    • /
    • 2021
  • In this research, the influence of the laminate stacking sequence on thermal stress distribution in symmetric composite plates with a quasi-square cutout subjected to uniform heat flux is examined analytically using the complex variable technique. The analytical solution is obtained based on the thermo-elastic theory and the Lekhnitskii's method. Furthermore, by employing a suitable mapping function, the solution of symmetric laminates containing a circular cutout is extended to the quasi-square cutout. The effect of important parameters including the stacking sequence of laminates, the angular position, the bluntness, the aspect ratio of cutout, the flux angle and the composite material are examined on the thermal stress distribution. It is found out that the circular shape for cutout may not necessarily be the optimum geometry for all stacking sequences. The finite element analysis results are used to validate the analytical solution.

Symmetric Balance Incomplete Block Design Code와 Arrayed-Waveguide Grating을 이용한 Optical CDMA Network Codecs (Optical CDMA Network Codecs with Symmetric Balance Incomplete Block Design Code and Arrayed-Waveguide Grating)

  • 지윤규
    • 대한전자공학회논문지SD
    • /
    • 제49권5호
    • /
    • pp.22-29
    • /
    • 2012
  • 본 논문은 symmetric balance incomplete block design(BIBD) code와 arrayed-waveguide grating(AWG) router의 주기적인 특성을 이용하여 optical CDMA network을 위한 coder-decoder(codec)을 구성하였다. 기존의 M-sequence code를 이용한 경우보다 다양한 구성을 할 수 있고 이 시스템의 잡음인 phase-induced intensity noise(PIIN)와 thermal noise를 분석하여 BER을 계산한 결과 향상된 성능을 보임을 알 수 있었다.

Current Limit Strategy of Voltage Controller of Delta-Connected H-Bridge STATCOM under Unbalanced Voltage Drop

  • Son, Gum Tae;Park, Jung-Wook
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권2호
    • /
    • pp.550-558
    • /
    • 2018
  • This paper presents the current limit strategy of voltage controller of delta-connected H-bridge static synchronous compensator (STATCOM) under an unbalanced voltage fault event. When phase to ground fault happens, the feasibility to heighten the magnitude of sagging phase voltage is considered by using symmetric transformation method in delta-structure STATCOM. And the efficiency to cover the maximum physical current limit of switching device is considered by using vector analysis method that calculate the zero sequence current for balancing the cluster energy in delta connected H-bridge STATCOM. The result is simple and obvious. Only positive sequence current has to be used to support the unbalanced voltage sag. Although the relationship between combination of the negative sequence voltage with current and zero sequence current is nonlinear, the more negative sequence current is supplying, the larger zero sequence current is required. From the full-model STATCOM system simulation, zero sequence current demand is identified according to a ratio of positive and negative sequence compensating current. When only positive sequence current support voltage sag, the least zero sequence current is needed.