• 제목/요약/키워드: Switching noise

검색결과 619건 처리시간 0.022초

능동 스너버를 갖는 ZVT PWM AC-DC 승압 컨버터 (ZVT PWM AC-DC Boost Converter with Active Snubber)

  • 김춘삼;성원기;이정문;최찬석;김수홍
    • 전기학회논문지
    • /
    • 제57권2호
    • /
    • pp.214-220
    • /
    • 2008
  • Most of converter system could obtain almost unity power factor and make input current sinusoidal waveform, but they have many problems, such as electromagnetic interference and switching losses caused by switching noise in main switch. To solve these problems in hard switching PFC converter, soft switching converter using a resonant between capacitor and inductor is invented In this paper, advantages and disadvantages of conventional ZVT(Zero-Voltage-Transition) soft switching converter using a auxiliary resonant circuit is discussed. Then Improved ZVT soft switching converter proposed. This improved ZVT converter's operation principal, specific property, design scheme of main are described. From Simulation and experiment results of conventional ZVT soft switching and improved ZVT soft switching converter with active snubber, characteristics of the converter are confirmed.

Delay Switching PLL의 Pull-in 특성 (Pull-in Characteristics of Delay Switching Phase-Locked Loop)

  • 장병화;김재균
    • 대한전자공학회논문지
    • /
    • 제15권5호
    • /
    • pp.13-18
    • /
    • 1978
  • 본 논문에서는 PLL의 pull-in 특성을 개선하기 위하여 delay switching PL난을 제시하였다. phase detector와 low grass filter사이에 간단한 RC delay회로를 삽입하고, 90° shift 시킨 Phase detector출력에 의하여 delay time을 switching하였다. 그 결과 pull-in range는 lock range의 1/2이상으로 넓힐 수 있었으며 pull-in time도 개선되었다. 이 개선된 Pull-in특성은 근사적으로 해석되었으며 실험으로 확인되었다.

  • PDF

복합잡음 환경에서 에지 보존을 위한 변형된 스위칭 필터에 관한 연구 (A Study on Modified Switching Filter for Edge Preservation in Mixed Noise Environments)

  • 권세익;김남호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2016년도 추계학술대회
    • /
    • pp.393-396
    • /
    • 2016
  • 디지털 영상 처리는 지능적이고 효율적인 방법으로 처리, 분석하는 기술 분야이며, 다양한 응용 분야에 실용화되고 있다. 그러나 영상 데이터는 여러 가지 원인에 의해 잡음이 발생하고 있으며, 이러한 잡음들을 제거하기 위한 다양한 방법들이 연구되고 있다. 일반적으로 잡음은 원인과 형태에 따라 다양한 종류가 있으며, 복합잡음이 대표적이다. 따라서 본 논문에서는 영상에 첨가된 복합잡음을 효과적으로 제거하고 우수한 에지 보존 특성을 갖기 위해, 잡음 형태에 따라 스위칭하여 처리하는 에지 보존을 위한 변형된 스위칭 필터를 제안하였다.

  • PDF

스위칭 트랜지스터를 이용하여 2.4/3.5/5.2 GHz에서 동작하는 다중 대역 저잡음 증폭기 설계 (Design of Multi-Band Low Noise Amplifier Using Switching Transistors for 2.4/3.5/5.2 GHz Band)

  • 안영빈;정지채
    • 한국전자파학회논문지
    • /
    • 제22권2호
    • /
    • pp.214-219
    • /
    • 2011
  • 본 논문에서는 2.4, 3.5, 5.2 GHz의 대역에 맞추어 스위칭 동작을 하는 다중 대역 저잡음 증폭기를 CMOS 0.18 um 공정을 이용하여 설계하였다. 제안된 회로는 스위칭 트랜지스터를 이용하여 입력단에서는 트랜스 컨덕턴스, 게이트-소스 캐패시턴스를 조정하고, 출력단에서는 캐패시턴스를 조정하는 방식으로 다중 대역 입출력 정합을 이루었다. 제안된 저잡음 증폭기는 각 스위칭 트랜지스터의 동작 상태에 따라 2.4, 3.5, 5.2 GHz 대역에서 제안된 회로는 입출력단에서 각각 14.2, 12, 11 dB의 이득과 3, 2.9, 2.8의 잡음 지수 특성을 갖는다. 다중 대역 저잡음 증폭기는 1.8 V의 공급 전압에 대해서 4.2~5.4 mW의 전력을 소비한다.

H-Bridge 7레벨 인버터를 이용한 유도전동기 구동시스템의 노이즈 저감을 위한 출력 필터설계 (Output Filler Design for Noise Reduction of Induction Motor Drive System using H-Bridge 7-Level Inverters)

  • 김수홍;안영오;김윤호;방상석;김광섭
    • 조명전기설비학회논문지
    • /
    • 제20권3호
    • /
    • pp.36-44
    • /
    • 2006
  • 일반적으로 PWM인버터에 발생된 고조파와 노이즈는 스위칭 주파수, dv/dt와 di/dt, PWM 스위칭 방법에 의해 영향을 받는다. 멀티레벨 인버터가 고전력 시스템에 적용되어 낮은 주파수에서 동작할 때 이것은 큰 고조파 성분과 노이즈를 발생하게 된다. 따라서 멀티레벨 인버터에 출력 필터가 요구된다. 본 논문에서는 H-bridge 7레벨 인버터 시스템을 사용한 3상 유도 전동기 구동 시스템의 고조파와 노이즈 감소를 위해 출력 필터를 설계하였다. 가격이 저렴하고 간단한 구조를 가지며, 고조파와 노이즈를 효과적으로 감소시킬 수 있는 수동필터는 멀티레벨 인버터 시스템을 사용한 3상 유도전동기 구동시스템에 적용되었다. 설계된 시스템은 향상되었고, 시뮬레이션과 실험을 통해 그 타당성을 증명하였다.

An Improved Zero Voltage Switching Forward DC/DC Converter For Reducing Switching Losses

  • Kim, Eun-Soo;Joe, Kee-Yeon;Park, Hae-Young;Kim, Yoon-Ho;Kim, Choon-Same
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
    • /
    • pp.1051-1055
    • /
    • 1998
  • To achieve high efficiency in high power and high frequency applications, reduction of switching losses and noise is very important. In this paper, an improved zero voltage switching forward dc/dc converter is proposed. The proposed converter is constructed by using energy recovery snubbers in parallel with the main switches and output diodes of the conventional forward dc/dc converter. Due to the use of the energy recovery snubbers in the primary and secondary side, the proposed converter achieves zero-voltage-switching turn-off without switching losses for switching devices and output rectification diodes. The complete operating principles and experimental results will be presented.

소프트 스위칭 방식을 갖는 2㎾ PFC 컨버터의 분석 설계 및 실험 비교 (Analysis, Design and Experimental Comparison of 2㎾ Power Factor Corrector Converters With Soft-Switching Methods)

  • 박경수;김윤호
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제51권9호
    • /
    • pp.537-544
    • /
    • 2002
  • This paper describes a comparative analysis of soft switching boost converters through design, production and experiment. Soft switching boost converters are designed to satisfy the condition of input voltage 170-265Vac, output voltage 400Vdc, output current 5A, output power 20W-2000W and unit power factor. In addition, parameter values are designed so that system operation can be compared under this is similar conditions. The efficiency of the combined inductor soft switching boost converter was 97.63% with 1011 load better than that of other boost converter types. The combined inductor soft switching converter has simple circuit construction and low switching loss. EMI resulted by the switching noise, and harmonic distortion.

RPWMdp 의한 SRM의 소음 저감 (Reduce Acoustic Noise in SRM Using RPWM)

  • 임영철;김광헌;나석환;김현덕;안정훈
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1998년도 전력전자학술대회 논문집
    • /
    • pp.189-192
    • /
    • 1998
  • For the practical using the SRM by domestic application, we must of all have solution to the noise and the vibration. This paper presents the acoustic noise emitted from the SRM. The emitted noise it particularly strong when the frequency of deformation coincides with that of a natural mechanical resonance of the stator. To reduce the emit acoustical noise varying the switching frequency randomly. We will consist of SRM control system by using DSP, and confirm the effects of the noise reduction

  • PDF

ZVS-LCC형 고주파 공진 인버터의 특성해석 (Characteristic Analysis of LCC Type High Frequency Resonant Inverter using ZVS)

  • 서철식;김동희;노채균;남승식;변영복;이봉섭
    • 전력전자학회논문지
    • /
    • 제4권4호
    • /
    • pp.311-317
    • /
    • 1999
  • 본 논문에서는 SEPP-LCC형 부하 공진 고주파 인버터의 한 회로형식을 제안하고, 그 동작원리에 관해서 명확히 하였다. 제안한 인버터는 스위칭 소자 양단에 병렬로 커패시터를 추가함으로써 스위칭 소자의 턴-온과 턴-오프시에 발생하는 스위칭 손실, 노이즈, 스트레스 등을 줄일 수 있다. 범용성 있는 회로해석을 위하여 무차원화 파라미터를 도입하였고, 동작특성 및 평가를 통하여 얻은 특성치를 이용하여 회로를 설계하였다. 또한, 실험을 통하여 이론해석의 정당성을 입증하였다.

  • PDF

A Study on PFC of Active Clamp ZVS Flyback Converter

  • Choi Tae-Young;Ahn Jeong-Joon;Ryu Dong-Kyun;Lee Woo-Suk;Won Chung-Yuen;Kim Soo-Seok
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
    • /
    • pp.611-616
    • /
    • 2001
  • This paper analyzed PFC of active clamp ZVS flyback converter by adding two methods PFC (power Factor Correction) circuit - two-stage and single-stage. The addition of active clamp circuit also provides a mechanism for achieving ZVS of both the primary and auxiliary switches. ZVS also limits the turn off di/dt of the output rectifier, reducing rectifier-switching loss and switching noise, due to diode reverse recovery. As a result, the proposed converters have characteristics of the reduced switching noise and high efficiency in comparison to conventional flyback converter. The simulation and experimental results show that the proposed converter improve the input PF of 300W ZVS flyback converter by adding single-stage, two-stage PFC circuit.

  • PDF