• 한국컴퓨터정보학회논문지
• /
• 제23권12호
• /
• pp.11-19
• /
• 2018

In the Unmanned Aerial Vehicle Line-Of-Sight datalink system, there is a possibility that the communication line is disconnected because line of sight can not be secured by one antenna due to changes in position and posture of the air vehicle. In order to prevent this, both top and bottom of air vehicle are equipped with antennas. At this time, if the signal can be transmitted and received by switching to an antenna advantageous for securing the line of sight, communication disconnection can be minimized. The legacy antenna switching method has disadvantages such that diffraction, fading due to the surface or obstacles, interference and reflection of the air vehicle are not considered, or antenna switching standard is not clear. In this paper, we propose an airborne antenna switching method for improving the performance of UAV LOS datalink system. In the antenna switching method, the performance of each of the upper and lower parts of the mounted antenna according to the position and attitude of the air vehicle is predicted by using the deep learning in an UAV LOS datalink system in which only the antenna except the receiver is duplicated. Simulation using flying test dataset shows that it is possible to switch antennas considering the position and attitude of unmanned aerial vehicle in the datalink system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.277-280
• /
• 1998

As user's demands for high-speed data traffic are recently increased, ABR services are considered as one of important service requirements in ATM networks. Unfortunately, a number of existing ATM switching systems have structural drawbacks as to support ABR services because these switching systems have been developed to support realtime(rt) services such as CBR and rt-VBR services. To support ABR services in the existing ATM switching systems, new traffic control mechanisms for ABR services are required. This paper proposes a method for supporting ABR services in ATM swithcing systems without back-pressure mechanisms and evaluates the performance of the proposed method using simulation.

• 대한전자공학회논문지
• /
• 제11권3호
• /
• pp.27-31
• /
• 1974

Pontryagin의 최대원리의 놀라운 방식을 써서 원자로에 있어서 최적제어 switching시간과 최적제초 switching 점을 구하였다. 그리고 원자로의 초기상태에서 그의 목표상태로 출력을 변환시킬 때의 제어궤적을 시간최적제어 방식을 이용하여 주어진 원자로의 parameter 값과 piecewise constant 입력값에 따라 최적화 시켰다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.100.2-100
• /
• 2001

In this paper, we presented a switching-based control algorithm for improving the speed of response on temperature control of an extruder. We proposed a switching actuating value method in a temperature control of extruder and showed the effect of H$\infty$ control and PID control. Recently, the memoryless feedback control had proposed, which was not only the real time integration element, but also the memory elements. We examined the application of a switching actuating value method to a memoryless feedback, in a unit barrel temperature control of an extruder.

• 전력전자학회논문지
• /
• 제14권4호
• /
• pp.268-277
• /
• 2009

본 논문은 DTC-PWM을 적용한 PMSM의 속도제어 방식을 제안한다. 제안된 DTC-PWM은 기존의 DTC 방식과 PWM을 결합한 방식으로 스위칭 신호를 발생하는 구조를 가진다. 제안된 방식에서 실제 토크는 기존의 DTC 방식과 같이 추종되지만, 스위칭 신호는 토크 오차와 제어규칙에 따라 PWM 방식으로 제어한다. 토크와 자속을 제어하기 위한 스위칭 신호는 하나의 유효전압벡터와 영전압벡터로 구성되는 비대칭 스위칭 방식이 적용된다. 제안된 방식은 SVPWM과 같이 복잡한 계산없이 간단한 PWM의 연산으로 제어기를 구성하여 토크와 자속을 연속적으로 제어할 수 있다. 제안된 방식은 PMSM의 속도 제어 실험을 통하여 그 성능을 검증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.297-300
• /
• 2001

This paper proposes a sound multicast packet-switching method which can less affect QoS degradation. The method includes a switch fabric with extra switching paths dedicated for multicast packets. Presented also are both a buffering structure and a scheduling algorithm for the proposed method. Simulation analysis for the method shows that the switching delay of unicast packets is decreased even though arrival rate of multicast packets is increased.

• 농촌지도와개발
• /
• 제15권3호
• /
• pp.433-460
• /
• 2008

The objectives of this study were to figure out the relationships of factors, e-quality, interactivity, trust and switching barrier, to affect the online customers loyalty. Moreover, e-quality was considered because of the problem of ssability originated from the environment that a lot of information and products are given at online business. This study employs a survey method to empirically test the proposed research model. A survey questionnaire was developed and 100 responses were collected. The data were analyzed using PLS method, a structural equation modeling method. The results of the study indicate that e-quality, interactivity, and trust influence switching barrier and that the switching barrier affects virtual relationship, which has an positive effect on loyalty. This study provides valuable theoretical and practical perspectives that e-quality is the most influential factor on virtual relationship and that, of the three factors of switching barrier, the virtual relationship is the most effective one to prevent customers online from changing their main online shop for products.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.345-347
• /
• 1994

It is importent to have the switching frequency of power supplies increase in order to reduce their size and weight. But according to increasing the switching frequency, there are several defacts - that is switching losses, high voltage/current stresses and conduction losses and so on. That's why soft switching method was proposed. This paper presents the simulation and analysis of the new proposed Full bridge Zero-Voltage-Transition PWM DC-DC converter for developing that unit. This circuit doesen't increase the voltage and current stresses of main MOSFET switches. Voltage type quasi-resorent method is applied and expected high effenciency. Switching frequency is 100KHz and main switches are MOSFET.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1055-1057
• /
• 2001

The switching circuit of PWM inverter is very complicated. By using one-chip $\mu$-com the complication of switching circuit is possible to be diminished. But because in one-chip $\mu$-com the limitation of processed memory size exists, the switching handling method has to be simple. In this paper, to effectively utilize the switching handling, we presented the estimation method of PWM pulses which is different form the conventional PWM switching method by the comparison.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권2호
• /
• pp.153-162
• /
• 2014

A novel robust $H_{\infty}$ switching tracking control design method with disturbance observer is proposed for the near space interceptor (NSI) with aerodynamic fins and reaction jets. Initially, the flight envelop of the NSI is divided into small subregions, and a slow-fast loop polytopic linear parameter varying (LPV) model is proposed, to approximate the nonlinear dynamic of the NSI, based on the Jacobian linearization and Tensor-Product (T-P) model transformation approach. A disturbance observer is then constructed, to estimate the modeled disturbance. Subsequently, based on the descriptor system method, a robust switching controller is developed, to ensure that the closed-loop descriptor system is stable with a desired $H_{\infty}$ disturbance attenuation level. Furthermore, the outcome of the proposed switching tracking control problem is formulated as a set of linear matrix inequalities (LMIs). Finally, simulation results demonstrate the effectiveness of the proposed design method.