• Korean Journal of Optics and Photonics
• /
• v.21 no.2
• /
• pp.69-73
• /
• 2010

We propose a method to enhance the response time of a twisted nematic liquid crystal (TN-LC) cell using an anisotropic polymer. Polymer networks are formed by the phase separation between a LC and a UV-curable polymer. A TN-LC cell is exposed to UV light after the mixture of LC and anisotropic polymer is injected into the TN-LC cell. As a result, turn-off time of a TN-LC cell can be decreased remarkably without any loss of the transmittance. The turn-off time of a TN-LC cell with pure LC was 16 ms, but those of polymer networked TN-LC cells were 12, 11, and 9 ms when the concentration of the polymer was 3, 5, and 10 wt%, respectively. Moreover, by virtue of the polymer network, the backflow effect and the delay time generated during the turn-off process disappeared.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.5
• /
• pp.457-464
• /
• 2009

The weak classifier of AdaBoost algorithm is a central classification element that uses a single criterion separating positive and negative learning candidates. Finding the best criterion to separate two feature distributions influences learning capacity of the algorithm. A common way to classify the distributions is to use the mean value of the features. However, positive and negative distributions of Haar-like feature as an image descriptor are hard to classify by a single threshold. The poor classification ability of the single threshold also increases the number of boosting operations, and finally results in a poor classifier. This paper proposes a weak classifier that uses multiple criterions by adding a probabilistic criterion of the positive candidate distribution with the conventional mean classifier: the positive distribution has low variation and the values are closer to the mean while the negative distribution has large variation and values are widely spread. The difference in the variance for the positive and negative distributions is used as an additional criterion. In the learning procedure, we use a new classifier that provides a better classifier between them by selective switching between the mean and standard deviation. We call this new type of combined classifier the "Mixed Weak Classifier". The proposed weak classifier is more robust than the mean classifier alone and decreases the number of boosting operations to be converged.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.19-25
• /
• 2014

For effective updating a blind equalizer, we propose the adaptive algorithm having faster convergence speed required for initial equalization and satisfying low error level required in steady-state while having a gradual and reversible switching characteristics between initial stage and steady-state. The proposed method presents three criteria to distinguish the state of equalized signal, according to the criteria, differently updates the equalizer by using the hybrid error generation algorithm generating one of the three errors. Wherein as the criteria to determine the state of the equalized signal the confidence intervals on the signal constellation are used, an error is generated alternatively according to the confidence interval where equalizer output lies, and the equalizer is updated by, we got convergence quickly and to lower error level. In order to verify the usefulness of the proposed idea, simulation results were compared to the performance of conventional methods.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.330-338
• /
• 2011

In this paper, a current-mode buck-boost converter using Multiple switching devices is presented. The efficiency of the proposed converter is higher than that of conventional buck-boost converter. In order to improve the power efficiency at the high current level, the proposed converter is controlled with PWM(pulse width modulation) method. The converter has maximum output current 300mA, input voltage 3.3V, output voltage from 700mV to 12V, 1.5MHz oscillation frequency, and maximum efficiency 90%. Moreover, this paper proposes watchdog circuits in order to ensure the reliability and to improve the performance of dc-dc converters. An electrostatic discharge(ESD) protection circuit for deep submicron CMOS technology is presented. The proposed circuit has low triggering voltage using gate-substrate biasing techniques. Simulated result shows that the proposed ESD protection circuit has lower triggering voltage(4.1V) than that of conventional ggNMOS(8.2V).

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.82-89
• /
• 2010

In this paper, a buck-boost converter using three DTMOS(Dynamic Threshold Voltage MOSFET) switching devices is presented. The efficiency of the proposed converter is higher than that of conventional buck-boost converter. DTMOS with low on-resistance is designed to decrease conduction loss. The threshold voltage of DTMOS drops as the gate voltage increases, resulting in a much higher current handling capability than standard MOSFET. In order to improve the power efficiency at the high current level, the proposed converter is controlled with PWM(pulse width modulation) method. The converter has maximum output current 300mA, input voltage 3.3V, output voltage from 700mV to 12V, 1.2MHz oscillation frequency, and maximum efficiency 90%. Moreover, the LDO(low drop-out) is designed to increase the converting efficiency at the standby mode below 1mA.

• Publications of The Korean Astronomical Society
• /
• v.11 no.1
• /
• pp.109-123
• /
• 1996

We have developed a 5GHz continuum receiver system. The receiver is a direct type receiver. In order to reduce the noise due to the fluctuation of the gain in the amplifiers, the system employs the Dicke switching method. We made the 5GHz low-noise amplifier and the bandpass filter. The low-noise amplifier gives ${\sim}35dB$ gain and has ${\sim}210K$ noise temperature. The bandpass filter has a passband between 4.3 and 5.4GHz. We also made switch driver, video amplifiers, phase detector, and integrator. Using a 1.8 meter offset parabolic antenna, we measured the efficiency of the system. Since the antenna does not have a driver to track objects, observations were performed with the antenna fixed. The measured noise temperature of the system is ${\sim}650K$. From the observation of the blank sky, noise level was measured. It was found that the systematic noise(${\sim}0.5K$: peak to peak value) is much larger than the thermal noise. The systematic noise is possibly related to the stability of the DC power supplied to the receiver system. Besides the noise of the system, it was found that the airplanes are the very serious noise sources. We measured the radio flux of the Sun using the developed system. The observed radio flux of the Sun is ${\sim}10^6Jy$, which is close to the known value of the quiet Sun. The test observation of the Sun shows that the angular beam size of the antenna is ${\sim}2.2^{\circ}$.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.57-66
• /
• 2010

In this paper, we propose the reliability constrained resource allocation scheduling algorithm in cellular network for uplink transmission, where uplink transmission is supported via packet switching schemes without the dedicated uplink circuit links. We evaluate the performance of the proposed algorithm, and compared with the conventional works to identify the pros and cons. The proposed uplink scheduling algorithm is to satisfy the constraints requirements of the MTC services which is considered as the core technology for future mobile wireless networks. It is different to conventional works which target to maximize the link capacity. The proposed algorithm provides reliable uplink transmission independent to the location and the quality of the wireless link of the mobile terminal. Based on the performance evaluation results, we conclude that the proposed method provides enhanced reliability performance than conventional works.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.581-590
• /
• 2003

This paper proposes the routing path selection mechanism for source routing-based PtMP (Point-to-Multipoint) call in ATM switching system. Especially, it suggests PtMP routing path selection method that can share the maximum resource prior to the optimal path selection, guarantee the reduction of path calculation time and cycle prevention. The searching for the nearest branch point from destination node to make the maximum share of resource is the purpose of this algorithm. Therefore among neighbor nodes from destination node by back-tracking, this algorithm fixes the node crossing first the node on existing path having the same Call ID as branch node, constructs the optimal PtMP routing path. The optimal node to be selected by back-tracking is selected by the use of Dijkstra algorithm. That is to say, PtMP routing path selection performs the step of cross node selection among neighboring nodes by back-tracking and the step of optimal node selection(optimal path calculation) among neighboring nodes by back-tracking. This technique reduces the process of search of routing information table for path selection and path calculation, also solves the cycle prevention easily during path establishment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.1
• /
• pp.90-97
• /
• 2001

A high frequency resonant inverter consisting of iliree unit Half-Bridge serial resommt inverter used as power source of induction heatmg at high frequency is presented in this paper. As a output [Dwer control strategy, sequencial time-sharing gate contml methcd is applied. This methcd is TDM(Time Division Multiplexing), which is broadly used with digital and analog signals transmission in communication system 1be analysis of the proposed circuit is generally described by using the normalized pararmenters. Also, the principle of basic operating and the its characteristics are estimated by the parameters such as switching frequency, load resistance. Also, according to the calculated characteristics value, a method of the circuit design and operating characteristics of the inverter is proposed. This paper proves the validity of theoretical analysis through the Pspice. This proposed inverter show that it can be practically used in future as power source system for induction heating application, DC-DC converter etc. r etc.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.465-468
• /
• 2005

MMA(Multi-Modulus Algorithm) is inferior at a initial equalization in high ISI(intersymbol interference), because it is the inaccurate decision. To improve this probel SMMA(Sliced Multi-Modulus Algorithm) is based on using the MCMA(Modified Constant Modulus Algorithm). SMMA is a improved capability than MMA in high SNR but is inaccurate decision in low SNR. In this paper, We propose some multi-modulus blind equalization algorithm scheme. It is a method of operation in some multi-modulus algorithm which does no obstruct a convergence property at the initial equalization in the low SNR. Proposed algorithm improves the steady-state performance. And it uses residual ISI of the equalizer output in order to decide the optimum switching time between the single modulus and the multi-modulus algorithm.