• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.1
• /
• pp.78-82
• /
• 2014

Power Transformers with more than one secondary winding are not uncommon in industrial applications. But new classes of applications where very large number of independent secondaries are used are becoming popular in controlled converters for medium and high voltage applications. Cascade H-bridge medium voltage drives and Pulse Step Modulation (PSM) based high voltage power supplies are such applications. Regulated high voltage power supplies (Fig. 1) with 35-100 kV, 5-10 MW output range with very fast dynamics (${\mu}S$ order) uses such transformers. Such power supplies are widely used in fusion research. Here series connection of isolated voltage sources with conventional switching semiconductor devices is achieved by large number of separate transformers or by single unit of multi-secondary transformer. Naturally, a transformer having numbers of secondary windings (~40) on single core is the preferred solution due to space and cost considerations. For design and simulation analysis of such a power supply, the model of a multi-secondary transformer poses special problem to any circuit analysis software as many simulation softwares provide transformer models with limited number (3-6) of secondary windings. Multi-Secondary transformer models with 3 different schemes are available. A comparison of test results from a practical Multi-secondary transformer with a simulation model using magnetic component is found to describe the behavior closer to observed test results. Earlier models assumed magnetising inductance in a linear loss less core model although in actual it is saturable core made-up of CRGO steel laminations. This article discusses a more detailed representation of flux coupled magnetic model with saturable core properties to simulate actual transformers very close to its observed parameters in test and actual usage.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.537-540
• /
• 2000

The Distribution System consist of many tie-line switches and sectionalizing switches, operated a radial type. When an outage occurs in Distribution System, outage areas are isolated by system switches, has to restored as soon as possible. At this time, system operator have to get a information about network topology for service restoration of outage areas. Therefore, the searching result of restorative topology has to fast computation time and reliable result topology for to restore a electric service to outage areas, equal to optimal switching operation problem. So, the problem can be defined as combinatorial optimization problem. The service restoration problem is so important problem which have outage area minimization, outage loss minimization. Many researcher is applying to the service restoration problem with various techniques. In this paper, advanced Dijkstra algorithm is applied to searching a restoration topology, is so efficient to searching a shortest path in graph type network. Additionally, fuzzy rules and operator are applied to overcome a fuzziness of correlation with input data. The present technique has superior results which are fast computation time and searching results than previous researches, demonstrated by example distribution model system which has 3 feeders, 26 buses. For a application capability to real distribution system, additionally demonstrated by real distribution system of KEPCO(Korea Electric Power Corporation) which has 8 feeders and 140 buses.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.799-806
• /
• 2016

We present a polarization-dependent prism array film for controlling the viewing angle distribution of liquid crystal (LC) display panels without loss of light efficiency. On a directional backlight unit, our polarization-dependent prism array film, made into a stacked bilayer with a well-aligned liquid crystalline reactive mesogen (RM) layer on the UV-imprinted prism structure, can continuously control the light refraction function of the prism array by electrically switching incident polarization states of a polarization-controlling layer prepared by a twisted nematic LC mode. The viewing angle control properties of the polarization-dependent prism array film are analyzed under different prism angle and refractive index conditions of the RM layer. A simple analytic model is also presented to describe the intermediate viewing angle distributions with continuously varying applied voltages and incident polarization states.

• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.40-47
• /
• 2002

This paper analyzes the performance of an optical line termination system in ATM based Passive Optical Network(PON) using the operational analysis. We analyze it using system parameters such as utilization, throughput and routing frequency based on the buffer structure in each block of ATM-PON. Furthermore, we derive the mean response time and the visit ratio of each block, and then search the bottleneck block that hinders the system performance. We found that the 622Mbps 16x16 switching block is the bottleneck block for ATM-PON. In this bottleneck block, the loss probability increases rapidly when the cell arrival rate increases.

• The KIPS Transactions:PartC
• /
• v.10C no.4
• /
• pp.485-492
• /
• 2003

This paper presents a new modified input buffered switch, which called a grouped input buffered (GIB) switch, to eliminate the influence of HOL blocking when using multiple input buffers in ATM switches. The GIB switch consists of grouped sub switches per a network stage. The switch gives extra paths and buffered switching elements between groups for transferring the blocked cells. As the result, the proposed model can reduce the effect by the HOL blocking and thereafter it enhances the performance of the switch. The simulation results show that the proposed scheme has good performance in comparison with previous works by using the parameters such as throughput, cell loss, delay and system power.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.2
• /
• pp.20-24
• /
• 2006

Recently, utility network is becoming more and more complicated and huge due to IT and OA devices. In addition to, demands of power conversion devices which have non-linear switching devices are getting more and more increased. Consequently, because of the non-linear power semiconductor devices, current harmonics are unavoidable. Sometimes those current harmonics flow back to utility network and become one of the main reasons which can make the voltage distortion. Also, it makes noise and heat loss. On the other hands, voltage sag from sudden increasing loads is also one of the terrible problems inside of utility network. In order to compensate the current harmonics and voltage sag problem, AF(active filter) systems could be a good solution method. SMES is a very good promising source due to it's high response time of charge and discharge. Therefore, the combined AF and SMES system can be a wonderful device to compensate both harmonics current and voltage sag. However, SMES needs a superconducting magnetic coil. Because of using this superconducting magnetic coil, quench problem caused by unexpected reasons have always been unavoidable. Therefore, to solve out mentioned above, this paper presents a decisive method using shunt and series active filter system combined with SMES. Especially, authors analyzed the change of original energy capacity of SMES regarding to the size of resistance caused by quench of superconducting magnetic coil.

• Molecules and Cells
• /
• v.42 no.3
• /
• pp.218-227
• /
• 2019

This study was designed to determine the effects of the long non-coding RNA (lncRNA) plasmacytoma variant translocation 1 (PVT1) on vascular smooth muscle cell (VSMC) apoptosis and extracellular matrix (ECM) disruption in a murine abdominal aortic aneurysm (AAA) model. After injection of PVT1-silencing lentiviruses, AAA was induced in Apolipoprotein E-deficient ($ApoE^{-/-}$) male mice by angiotensin II (Ang II) infusion for four weeks. After Ang II infusion, mouse serum levels of pro-inflammatory cytokines were analysed, and aortic tissues were isolated for histological, RNA, and protein analysis. Our results also showed that PVT1 expression was significantly upregulated in abdominal aortic tissues from AAA patients compared with that in controls. Additionally, Ang II treatment significantly increased PVT1 expression, both in cultured mouse VSMCs and in AAA murine abdominal aortic tissues. Of note, the effects of Ang II in facilitating cell apoptosis, increasing matrix metalloproteinase (MMP)-2 and MMP-9, reducing tissue inhibitor of MMP (TIMP)-1, and promoting switching from the contractile to synthetic phenotype in cultured VSMCs were enhanced by overexpression of PVT1 but attenuated by knockdown of PVT1. Furthermore, knockdown of PVT1 reversed Ang II-induced AAA-associated alterations in mice, as evidenced by attenuation of aortic diameter dilation, marked adventitial thickening, loss of elastin in the aorta, enhanced aortic cell apoptosis, elevated MMP-2 and MMP-9, reduced TIMP-1, and increased pro-inflammatory cytokines. In conclusion, our findings demonstrate that knockdown of lncRNA PVT1 suppresses VSMC apoptosis, ECM disruption, and serum pro-inflammatory cytokines in a murine Ang II-induced AAA model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1B
• /
• pp.60-70
• /
• 2011

IPTV was introduced as the new growth engine of the broadcasting and telecommunications industry and has experienced a high growth rate as its subscribers exceeded 2 million in early 2010. However there have been some doubts on if the IPTV market will keep current growth drift. One of such suspicions is that IPTV market has not been developed by the competitiveness of IPTV industry itself. In addition, the recent slowdown of subscribers' growth and IPTV players' operating at a loss has been suggested as obstacles to the IPTV market growth. This sort of phenomenon has been brought about by ambiguous proposition of IPTV's own value as well as IPTV service positioning gap. To resolve these problems this study empirically investigates what customers want to get from IPTV service by analyzing switching value of IPTV subscribers. This study also identifies which values must be strategically considered to develop next generation IPTV services, in particular mobile IPTV services. Following the investigation, this study analyzes the possible positioning gap of mobile IPTV. Through this analysis, this study suggests which sort of service values need to be reconciled.

• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.399-407
• /
• 2021

This paper proposes the DC-link voltage design method of Type 4 wind turbine that minimizes power loss and satisfies the High Voltage Ride Through(HVRT) function requirements of the transmission system operator. The Type 4 wind turbine used for large-capacity offshore wind turbine consists of the Back-to-Back converter in which the converter linked to the power grid and the inverter linked to the wind turbine share the DC-link. When the grid high voltage fault occurs in the Type 4 wind turbine, if the DC-link voltage is insufficient compared to the fault voltage level, the current controller of the grid-side converter can't operate smoothly due to over modulation. Therefore, to satisfy the HVRT function, the DC-link voltage should be designed based on the voltage level of high voltage fault. However, steady-state switching losses increase further as the DC-link voltage increases. Therefore, the considerations should be included for the loss to be increased when the DC-link voltage is designed significantly. In this paper, the design method for the DC-link voltage considered the fault voltage level and the loss is explained, and the validity of the proposed design method is verified through the HVRT function simulation based on the PSCAD model of the 2MVA Type 4 wind turbine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.279-290
• /
• 2021

This study evaluated the economic feasibility of facility farms according to the introduction of the ultra-high density pot cultivation (UHDPC) for mango. The basic model was selected as a representative farmhouse case in the Jeonnam region, and seven scenarios for conventional crops were tested. The economic feasibility of crop switching was analyzed through partial budget analysis (PBA). The PBA analysis results were supplemented by adding a sensitivity analysis and a break-even point (BEP) analysis. As a result of the analyses, it was found that crop conversion was economical because the increase in the profit coefficient was greater than the increase in the loss coefficient due to the introduction of mango for all conventional crops. The economics of introducing mango was more sensitive to changes in gross income than to changes in cost items. The results show the detailed conditions of crop selection according to the conditions and preferences of individual farms by presenting the direction of increase and decrease by budget item and information on the amount of increase or decrease. In particular, the BEP analysis result, which is about half of the farms case, is significant in that it presents the minimum target value according to production and market risks.