• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.805-811
• /
• 2016

This paper proposes an estimation algorithm of phase currents of inverter systems with the planar bus bars for brush-less DC (BLDC) motors. The planar bus bar can improve the characteristic of the EMC(Electro-Magnetic Compatibility). In these inverters, a single current sensor of the dc-link measures the sum of a smooth capacitor current and phase currents of brush-less DC motor. Thus, it is essential to extract phase currents from the measured single current to control BLDC motor. Therefore, in this paper, the phase current is estimated by analyzing equivalent circuits of the BLDCM in ON and OFF periods of switching elements. The usefulness of the proposed algorithm is verified through experimental results.

• Journal of the Korean Society for Railway
• /
• v.12 no.2
• /
• pp.243-248
• /
• 2009

The operation of KTX in Korea has launched since 2004, which brought about a great change in railroad industry. We have acquired lots of great know-hows, especially in railroad construction and operation field. Therefore, we have been building up numerous operation skills until now. However, it was necessary to investigate some of the equipment based on our own environment because the high speed train system were totally imported. In case of Toughened Glass Stem Insulator, it was totally new type in domestic. This paper introduces estimation method and result in three different field aspect, such as an electrical field, a physical field, and environmental circumstances. First, in case of an electrical field, amplitude and a number of time for switching surge voltage data were collected. Second, in case of a physical field, amplitude and trend of vibration in to the insulator were examined. Finally, in case of environmental circumstances, flying possibility of gravel and ice clod were investigated. Also shrink and expend characteristic according to temperature were reviewed. Through this basic data, suitability for Toughened Glass Stem Insulator using in domestic high speed railway have been accumulated and estimated.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.109-115
• /
• 2003

We Have fabricated a holographic polymer-dispersed liquid crystal (HPDLC) thin film, which is composed of multifunctional acrylate monomer blended with the nematic liquid crystal mixture, and then investigated the real-time diffraction efficiencies for various amounts of liquid crystals and applied AC electric fields. It is experimentally shown that the holographic gratings recorded in the HPDLC film can be reversibly erased and reconstructed by switching on and off an appropriate applied AC electric field. By use of these electro-optic properties we have developed bifocal holographic lenses having two different focal lengths of 30cm and 40 cm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6B
• /
• pp.331-337
• /
• 2005

The optical Internet is considered as a feasible solution for transporting huge amount of traffic volume in the future Internet. Among optical switching technology for the optical Internet, OBS becomes one of the most promoting solution. Recently, a lebeled OBS(LOBS) architecture is considered for an efficient control on OBS network. Given that a data burst may contain few thousands of IP packets, a single loss of data burst results in a serious throughput degradation in LOBS network. In this paper, we improve the performance of LOBS network by introducing the burst congestion control mechanism. More specifically, the OBS router at the network core detects the network congestion by measuring the loss probability of burst control packet. The OBS router at the network edge reduces the burst generation according to the network condition repored by the OBS router at the network core. Through the simulations, it is shown that the proposed congestion control mechanism can reduce the burst loss probability and improve the LOBS network throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.581-590
• /
• 2003

This paper proposes the routing path selection mechanism for source routing-based PtMP (Point-to-Multipoint) call in ATM switching system. Especially, it suggests PtMP routing path selection method that can share the maximum resource prior to the optimal path selection, guarantee the reduction of path calculation time and cycle prevention. The searching for the nearest branch point from destination node to make the maximum share of resource is the purpose of this algorithm. Therefore among neighbor nodes from destination node by back-tracking, this algorithm fixes the node crossing first the node on existing path having the same Call ID as branch node, constructs the optimal PtMP routing path. The optimal node to be selected by back-tracking is selected by the use of Dijkstra algorithm. That is to say, PtMP routing path selection performs the step of cross node selection among neighboring nodes by back-tracking and the step of optimal node selection(optimal path calculation) among neighboring nodes by back-tracking. This technique reduces the process of search of routing information table for path selection and path calculation, also solves the cycle prevention easily during path establishment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.926-934
• /
• 2016

In this paper, we designed a compact frequency synthesizer with multi-function for Ka-band seeker. DDS(Direct Digital Synthesizer) is applied to generate various waveform and to cover high-speed frequency sweep. In order to reduce size, waveform generator and frequency up-converter are integrated in one module. Proposed frequency synthesizer provides precise detection and tracking waveform for low and high speed targets. It is observed that fabricated synthesizer performs $0.45{\mu}sec$ frequency switching time and -93.69 dBc/Hz phase noise at offset 1 kHz. The size of the synthesizer is kept within 120 mm width, 120 mm length and 22 mm height.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.397-404
• /
• 2011

In this research, wish to suggest method to embody system that can accommodate defect of PLC and find actual propriety. Defect permission control system minimizes production damage because enables repair and checking without discontinuance and improve believability about whole system. Propose duplexing of system to embody this fault tolerant system. Therefore, composed control system that can permit defect or breakdown duplexings of various module proposing this system, and confirms to simulation and actuality kiln of defect permission control system through an application experiment, and compares for mean time between defect by estimate and defect special quality and system configuration of failure(failure) to improve believability of PLC control system together. In proposed system expression method and system mode and relation with operation mode, error discovery mode and switching tube of duplexing mode, and PLC's central processing unit of node study algorithm about master-standby conversion driving and continuous operation of 2 channels method that have 2 that is not one and deduced continuous operation method and result about defect permission in this algorithm and applies this result to actuality kiln control system and confirms continuous operation about PLC defect permission.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.465-468
• /
• 2005

MMA(Multi-Modulus Algorithm) is inferior at a initial equalization in high ISI(intersymbol interference), because it is the inaccurate decision. To improve this probel SMMA(Sliced Multi-Modulus Algorithm) is based on using the MCMA(Modified Constant Modulus Algorithm). SMMA is a improved capability than MMA in high SNR but is inaccurate decision in low SNR. In this paper, We propose some multi-modulus blind equalization algorithm scheme. It is a method of operation in some multi-modulus algorithm which does no obstruct a convergence property at the initial equalization in the low SNR. Proposed algorithm improves the steady-state performance. And it uses residual ISI of the equalizer output in order to decide the optimum switching time between the single modulus and the multi-modulus algorithm.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.141-144
• /
• 2006

The deviations in the injection orbital parameters, resulting from launcher dispersions, need to be estimated and used for autonomous satellite operations. For the proposed small satellite mission of the university there will be two GPS receivers onboard the satellite to provide the instantaneous orbital state to the onboard data handling system. In order to meet the power requirements, the satellite will be sun-tracking whenever there is no imaging operation. For imaging activities, the satellite will be maneuvered to nadir-pointing mode. Due to such different modes of orientation the geometry for the GPS receivers will not be favorable at all times and there will be instances of poor geometry resulting in no output from the GPS receivers. Onboard the satellite, the orbital information should be continuously available for autonomous switching on/off of various subsystems. The paper presents the strategies to make use of small arcs of data from GPS receivers to compute the mean orbital parameters and use the updated orbital parameters to calculate the position and velocity whenever the same is not available from GPS receiver. Thus the navigation message from the GPS receiver, namely the position vector in Earth-Centered-Earth-Fixed (ECEF) frame, is used as measurements. As for estimation, two techniques - (1) batch least squares method, and (2) Kalman Filter method are used for orbit estimation (in real time). The performance of the onboard orbit estimation has been assessed based on hardware based multi-channel GPS Signal simulator. The results indicate good converge even with short arcs of data as the GPS navigation data are generally very accurate and the data rate is also fast (typically 1Hz).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.65-73
• /
• 2002

This paper proposes a new carrier-based PWM method to solve the most serious problem of flying capacitor multi-level inverter that is the unbalance of capacitor voltages. The voltage unbalance occurs due to the difference of each capacitor's charging and discharging time applied to Flying Capacitor Inverter. New solution controls the variation of capacitor voltages into the mean '0'during some period by means of new carriers using the leg voltage redundancy in the flying capacitor inverter. The solution can be easily expanded to the multi-level inverter. The leg voltage redundancy in the new method makes the switching loss of device equals to the conduction loss of device. This paper will examine the unbalance of capacitor voltage and the conventional theory of self-balance using Phase-shifted carrier. And then the new method that is suitable to the flying capacitor inverter will be explained.