• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.356-368
• /
• 2011

While most of the public radio spectrum bands are allocated to licensed users, cognitive radio has been considered as a promising technology for the efficient spectrum utilization. In this new technology, secondary users opportunistically use the temporally underutilized licensed bands as long as they do not give the harmful interference to primary users. In this paper, we focus on the infra-structured network condition in which the cognitive radio network consists of a cognitive radio base station and multiple secondary users. Upon detecting a primary user, the entire cognitive radio network generally switches to another available channel, even if most of the on-going communications still does not interfere with the primary user. Moreover, the network re-entry process on a new channel causes the service disruption of the on-going communications. For this reason, in this paper, we propose a relaying scheme for efficient frequency usage, in which the secondary user out of the interference range of a primary user performs as a relaying node for the secondary user possibly interfering with a primary user. The entire spectrum switching is not required, and thus, we can avoid the service disruption of the on-going communications as much as possible.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.11
• /
• pp.83-94
• /
• 2003

In this paper. a highly linear and low glitch CMOS current mode digital-to-analog converter (DAC) by self calibration bias circuit is proposed. The architecture of the DAC is based on a current steering 6＋4 segmented type and new switching scheme for the current cell matrix, which reduced non-linearity error and graded error. In order to achieve a high performance DAC . novel current cell with a low spurious deglitching circuit and a new inverse thermometer decoder are proposed. The prototype DAC was implemented in a 0.35${\mu}{\textrm}{m}$ n-well CMOS technology. Experimental result show that SFDR is 60 ㏈ when sampling frequency is 32MHz and DAC output frequency is 7.92MHz. The DAC dissipates 46 mW at a 3.3 Volt single power supply and occupies a chip area of 1350${\mu}{\textrm}{m}$ ${\times}$750${\mu}{\textrm}{m}$.

• Journal of Life Science
• /
• v.33 no.8
• /
• pp.639-650
• /
• 2023

The levels of harmful components in aerosols from heated tobacco products (HTPs) have been reported to be significantly lower than in cigarette smoke. However, it remains unclear whether the use of HTPs can mitigate the cardiovascular risks associated with cigarette smoking (CS). The objective of this study was to investigate the effects of a short-term switch from CS to HTP use on cardiac autonomic regulation (CAR). Seven healthy male smokers completed an open-label, randomized, cross-over trial consisting of five days of CS, use of three different HTPs (IQOS use, IQ; lil SOLID use, LS; lil HYBRID use, LH), or non-smoking (NS). Each session was separated by a one-week washout period, and levels of exhaled carbon monoxide (CO) and carboxyhemoglobin (COHb), systolic (SBP) and diastolic blood pressure (DBP), and heart rate variability (HRV) reflecting CAR were assessed before use of the product assigned to each session and at 24, 48, 72, 96, and 120 hr after use. Levels of exhaled CO and COHb were statistically significantly reduced only during NS. There were no statistical changes in SBP and DBP within any session. However, in HRV spectral analysis, log-transformed high frequency (lnHF) increased statistically significantly in IQ, LS, and NS, respectively. Normalized HF (HFnu) was significantly increased in NS and LH, respectively. lnHF and HFnu showed significant interaction effects. The findings of this study suggest that a short-term switch to HTPs instead of CS may lead to different distribution patterns of CAR, primarily driven by enhanced cardiac vagal tone.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.1
• /
• pp.141-156
• /
• 2008

Market structure analysis is a very useful tool to analyze the competition boundary of the brand or the company. But most of the studies in market structure analysis, the concern lies in nondurable goods such as candies, soft drink and etc. because of the their availability of the data. In the field of durable goods, the limitation of the data availability and the repurchase time period constrain the study. In the analysis of the automobile market, those of views might be more persuasive. The purpose of this study is to analyze the structure of automobile market based on some idea suggested by prior studies. Usually the buyers of the automobile tend to buy upper tier when they buy in the next time. That kind of behavior make it impossible to analyze the structure of automobile market under the level of automobile model. For that reason I tried to analyze the market structure in the brand or company level. In this study, consideration data was used for market structure analysis. The reasons why we used the consideration data are summarized as following. Firstly, as the repurchase time cycle is too long, brand switching data which is used for the market analysis of nondurable good is not avaliable. Secondly, as we mentioned, the buyers of the automobile tend to buy upper tier when they buy in the next time. We used survey data collected in the U.S.A. market in the year of 2005 through questionaire. The sample size was 8,291. The number of brand analyzed in this study was 9 among 37 which was being sold in U.S.A. market. Their market share was around 50%. The brands considered were BMW, Chevrolet, Chrysler, Dodge, Ford, Honda, Mercedes, and Toyota. �� ratio was derived from frequency of the consideration set. Actually the frequency is different from the brand switch concept. In this study to compute the �� ratio, the frequency of the consideration set was used like a frequency of brand switch for convenience. The study can be divided into 2 steps. The first step is to build hypothetical market structures. The second step is to choose the best structure based on the hypothetical market structures, Usually logit analysis is used for the choice best structure. In this study we built 3 hypothetical market structure. They are type-cost, cost-type, and unstructured. We classified the automobile into 5 types, sedan, SUV(Sport Utility Vehicle), Pickup, Mini Van, and Full-size Van. As for purchasing cost, we classified it 2 groups based on the median value. The median value was $28,800. To decide best structure among them, maximum likelihood test was used. Resulting from market structure analysis, we find that the automobile market of USA is hierarchically structured in the form of 'automobile type - purchasing cost'. That is, result showed that automobile buyers considered function or usage first and purchasing cost next. This study has some limitations in the analysis level and variable selection. First, in this study only type of the automobile and purchasing cost were as attributes considered for purchase. Considering other attributes is very needful. Because of the attributes considered, only 3 hypothetical structure could be analyzed. Second, due to the data, brand level analysis was tried. But model level analysis would be better because automobile buyers consider model not brand. To conduct model level study more cases should be obtained. That is for acquiring the better practical meaning, brand level analysis should be conducted when we consider the actual competition which occurred in the real market. Third, the variable selection for building nested logit model was very limited to some avaliable data. In spite of those limitations, the importance of this study lies in the trial of market structure analysis of durable good.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.3
• /
• pp.529-535
• /
• 1998

Background: Interleukin-4 plays an important role in pathogenesis of asthma, especially in developing atopy by means of switching B lymphocytes to produce IgE. It has been shown that there is polymorphism in the Interleukin-4 promoter region, transversion of cytosine to thymine at-598 from translation initiation site of IL-4 gene. There has also been quite a few works to reveal the role of the polymorphism of IL-4 gene in patients with asthma. We performed this investigation to determine the role of the polymorphism in the severity of symptoms of patients with asthma. We also examined the frequency and the type of the polymorphism in asthmatics compared with non-asthmatics as well. Method: The subjects enrolled in this study were 49 asthmatics and 33 non-asthmatics. All the asthmatics were classified as mild and moderate to severe by the NHLBI/WHO Workshop. DNA from both asthmatics and non-asthmatics was extracted, then performed ARMS(Amplification Refractory Mutation System) as well as RFLP using BsmFl restriction enzyme in order to confirm the polymorphism of Il-4 gene. Results: There was no significant difference in the occurrence of polymorphism of the IL-4 promoter sequence between asthm and non-asthma groups(P=0.7). Among those with polymorphisms, the number of C/C type was slightly more than C/T type in both asthmatics and non-asthmatics, 26 vs 21 in asthmatics and 18 vs 15 in non-asthmatics, which was, however, insignificant statistically. No significant relationship between the severity of asthma and the polymorphism was found(P=0.7). Conclusion: There was no significant difference between the severity of asthma and the IL-4 promoter polymorphism(P=0.709). Interestingly, the frequency of the polymorphism in both asthmatics as well as non-asthmatics was found to be even higher than that occurred in Caucasians. However, no significant difference in the frequency of the polymorphism was found in both groups.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.115-116
• /
• 2012

The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.128-135
• /
• 2013

This paper presents a high dimming ratio Power-LED driver IC with high power which is capable of controlling LEDs. In order to accomplish a high dimming ratio LED driver, the preloading inductor current methodology is proposed for the power stage of the proposed method to achieve the fast transient response time during the Power-LED load switching. The information containing the current flowing on the LEDs can be utilized to predict the amount of the current on the inductor. The minimum LED current rising time of existing high dimming ratio Power-LED driver is limited by $3{\mu}s$, however that of the proposed high dimming ratio Power-LED driver is reduced about 1/10. The LED driver is implemented with 0.35um 60V BCDMOS 2-poly 4-metal process. The measurement results show that the proposed LED driver system features the minimum rising time as small as 240ns at the dimming frequency of 1KHz with a 12V of input voltage, nine white LEDs and 353mA of LED current. The LED rising time and power conversion efficiency of the chip are measured to be 240ns and 93.72%, respectively.

• Journal of Biomedical Engineering Research
• /
• v.25 no.4
• /
• pp.269-275
• /
• 2004

Different biological tissues have different values of electrical resistivity. In EIT (electrical impedance tomography), we try to provide cross-sectional images of a resistivity distribution inside an electrically conducting subject such as the human body mainly for functional imaging. However, it is well known that the image reconstruction problem in EIT is ill-posed and the quality of a reconstructed image highly depends on the measurement error. This requires us to develop a high-performance EIT system. In this paper, we describe the development of a 16-channel digital EIT system including a single constant current source, 16 voltmeters, main controller, and PC. The system was designed and implemented using the FPGA-based digital technology. The current source injects 50KHz sinusoidal current with the THD (total harmonic distortion) of 0.0029% and amplitude stability of 0.022%. The single current source and switching circuit reduce the measurement error associated with imperfect matching of multiple current sources at the expense of a reduced data acquisition time. The digital voltmeter measuring the induced boundary voltage consists of a differential amplifier, ADC, and FPGA (field programmable gate array). The digital phase-sensitive demodulation technique was implemented in the voltmeter to maximize the SNR (signal-to-noise ratio). Experimental results of 16-channel digital voltmeters showed the SNR of 90dB. We used the developed EIT system to reconstruct resistivity images of a saline phantom containing banana objects. Based on the results, we suggest future improvements for a 64-channel muff-frequency EIT system for three-dimensional dynamic imaging of bio-impedance distributions inside the human body.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.93-100
• /
• 2009

This paper presents a step up four channel DC-DC converter using charge pump voltage doubler structure. Our goal is to design and implement DC-DC converter for capacitive SP4T RF MEMS switch in front end module in wireless transceiver system. Charge pump structure is small and consume low power 3.3V input voltage is boosted by DC-DC Converter to $11.3{\pm}0.1V$, $12.4{\pm}0.1V$, $14.1{\pm}0.2V$ output voltage With 10MHz switching frequency. By using voltage level shifter structure, output of DC-DC converter is selected by 3.3V four channel selection signals and transferred to capacitive MEMS devices. External passive devices are not used for driving DC-DC converter. The total chip area is $2.8{\times}2.1mm^2$ including pads and the power consumption is 7.52mW, 7.82mW, 8.61mW.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.987-994
• /
• 2010

In this paper, a simple and effective active load-pull method is proposed, and the method to improve the efficiency of X-band power amplifier using harmonic control circuit is presented. The proposed active load-pull system mainly consists of directional coupler, phase shifter, short circuit, and power amplifier, and allows a user to access reflection coefficients near the edge of the Smith chart($\Gamma$=1) easily. The device used in this paper is Mitsubishi's GaAs FET MGF1801, and the operating frequency of the power amplifier is 9 GHz, The amplifier had output power of 21.65 dBm and drain efficiency of 24.9 % at class-A, and had output power of 21.46 dBm and drain efficiency of 53.3 % at class-AB. Harmonic control circuit is designed only second and third harmonic components because of the bandwidth limitation of the microwave components. The drain efficiency is improved as much as 6.4 % compared with class-AB power amplifier.