• Journal of Power Electronics
• /
• 제5권1호
• /
• pp.29-35
• /
• 2005

This paper presents a novel prototype of an active auxiliary quasi-resonant snubber(Auxiliary Quasi-Resonant Commutation Block-Link; ARCB)-assisted three phase voltage source soft switching space voltage vector modulated PFC rectifier, which uses Zero Voltage Soft Switching (ZVS) commutation. The operating principles of this digitally-controlled three phase soft switching PWM-PFC rectifier system with an instantaneous power feedback scheme are illustrated and its steady-state performance is evaluated using computer-aided simulation analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.249-250
• /
• 2008

In this paper, we propose the single polycrystalline silicon flash EEPROM IC with a new structure which does not need the high voltage switching circuit. The design of high voltage switching circuits which are needed for the data program and erase, has been an obstacle to develop the single-poly EEPROM. Therefore, we has proposed the new cell structure which uses the low voltage switching circuits and has designed the full chip. A new single-poly EEPROM cell is designed and the full chip including the control block, the analog block, row decoder block, and the datapath block is designed. And the each block is verified by using the computer simulation. In addition, the full chip layout is performed.

• 한국산업정보학회논문지
• /
• 제25권5호
• /
• pp.13-21
• /
• 2020

이 논문은 직교 주파수 분할 다중화 시스템에 사용하는 공간 주파수 블록 코딩에서의 부호 반전 채널 스위칭 알고리즘을 제안한다. 소스 데이터를 다른 안테나로 보내는 경우에는 수신기는 바뀐 그 채널에 적합하도록 결합 방법을 바꾸어야 한다. 만일 미리 정의된 채널 스위칭 시퀀스를 모르는 수신기라면, 수신한 데이터를 정확하게 복호할 수 없게 된다. 채널 스위칭을 위한 송신 데이터를 바꾸는 경우에는 데이터 심볼들을 공간 주파수 블록 코딩 형식에 맞추어서 바꾸어야 한다. 이 논문에서는 송신 안테나 간의 데이터 심볼들을 바꾸는 것이 아닌 단지 부호 반전 방법을 제안한다. 이 방법을 사용하면 다른 결합 방법을 발생시킴으로써 수신기에서 간단한 암호화로 동작함을 보였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.721-724
• /
• 2006

본 논문에서는 분할기법을 이용하여 디지털논리스위칭함수를 구성하는 한가지 방법을 제안하였다. 먼저, 디지털논리시스템에 대한 분할기법의 개념을 서술하였고, 본 논문에서 사용되는 각종 정의에 대해 논의하였다. 또한, 제안한 방법으로 구한 디지털논리스위칭함수를 회로설계하기 위해 먼저, 각각의 분할함수에 기초를 둔 Building Block(BB)을 구성에 대해 서술하였다. 그리고 이들 BB를 근간으로 회로설계하는 방법에 대해 논의하였다. 그리고 제안한 방법을 적용 예를 들어 그 결과를 기존의 방법과 비교 및 검토하였다. 그 결과 기존의 방법에 비해 효과적인 cost를 얻을 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.168-174
• /
• 2001

In this paper, a new space vector RPPWM (Random Position PWM) is proposed. In the proposed RPPWM, each of three phase pulses is located randomly in each switching interval. Based on the space vector modulation technique, the duty ratio of the pulses is calculated. Along with the randomization of the PWM pulses, we can obtain the effects of spread spectra of voltage, current as in the case of randomly changed switching frequency. To verify the validity of the proposed RPPWM, simulation study was tried using Matlab/simulink. The main model described in Simulink block diagrams includes the space vector modulation block, pulse position randomization block, inverter block, 3 phase induction motor block, and so on. By the simulation study, the harmonics of the output voltage, and the current of inverter are predicted in different PWM methods- SVPWM, LLPWM, proposed RPPWM.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.507-510
• /
• 2003

This paper presents a novel prototype of tile three-phase bridge power block module type a auxiliary resonant AC link snubber circuit, which is effectively used for the three-phase voltage source type sinewave soft switching PWM inverter using IGBTs. Its operating principle Is described for current source load model, along with its practical design approach based on the simulation data. The performance evaluation of the three-phase voltage source type snewave soft switching PWM inverter incorporating a single three-phase bridge mo여le of active auxiliary resonant AC link snubber treated here Is illustrated, which is concerned with power duality efficiency power loss analysis. This inverter is discussed as compared with those of tile three-phase voltage source type sinewave hard switching PWM inverter. The power loss analysis of this soft switching PWM Inverter using IGBT power modules is evaluated on the basis of the measured v-i characteristics and switching power losses of IGBT, and antiparaliel diodes. The practical effectiveness of this inverter is proven by the power loss analysis for distributed power supply.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
• /
• pp.162-167
• /
• 1999

In Auxiliary block of High speed train Power factor correction and Harmonics reduction is very important issue for efficient energy transport. The GTO-equipped PWM converter is used for traction untill resently. but the rising power capability of IGBTs resently allows to build IGBT-equipped PWM converter with a considerably increases switching frequency. In this paper presents switching pattern, control method, operation mode and tuned filter to reduce dc link voltage ripple for paralleled converter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.233-233
• /
• 2000

Direct torque control (DTC) scheme provides a very quick torque response without the complex field-orientation block and inner current regulation loop. DTC is known as an appropriate scheme for high power induction motet drives because it can be used at lower switching frequency. There are two major drawbacks with the application of DTC schemes : one is large current harmonics due to flux drooping in a low speed range, the other is that the inverter switching frequency is varying according to motor parameters and operating speed. Switching devices in the power electronics drives should be supported for relatively high switching frequency. In this paper, a P-type fuzzy controller to realize the variable switching sector scheme and a PID-type fuzzy switching frequency regulator are adopted. A meaningful contribution of this paper is to propose a simple realization scheme of the fuzzy switching frequency regulator. Simulation results show the effectiveness of those propositions.

• 대한수학회보
• /
• 제48권4호
• /
• pp.737-757
• /
• 2011

This work is concerned with an optimal selling rule for a large position of stock in a market. Selling a large block of stock in a short period typically depresses the market, which would result in a poor filling price. In addition, the large selling intensity makes the regime more likely to be poor state in the market. In this paper, regime switching and depressing terms associated with selling intensity are considered on a set of geometric Brownian models to capture movements of underlying asset. We also consider the liquidation strategy to sell much smaller number of shares in a long period. The goal is to maximize the overall return under state constraints. The corresponding value function with the selling strategy is shown to be a unique viscosity solution to the associated HJB equations. Optimal liquidation rules are characterized by a finite difference method. A numerical example is given to illustrate the result.

• 전력전자학회논문지
• /
• 제6권6호
• /
• pp.525-537
• /
• 2001

본 연구에서는 펄스의 위치를 랜덤하게 함으로써 효율적은 RPWN (Random PWM)을 구현할 수 있는 새로운 공간 벡터 RPPWM(Random Position PWM)방식을 제안하였다. 제안한 방식은 마이크로 컨트롤로 적용하기 쉬운 공간벡터 변조에 의하여 각 상의 듀티비를 연산한 다음, 스위칭 순서를 유지하며 각 3상 펄스들의 위치를 변조구간내에서 임의의 위치에 랜덤하게 배치함으로써 RPWM을 구현하는 방식이다. 제안된 방법의 타당성을 검증하기 위하여 MATLAB/SIMULINK를 이용하여 펄스위치의 랜덤화 공각벡터 변조, 인버터 및 3상 유도전동기를 포함하는 전체 시스템을 모델화하였다. 종전의 공각벡턱 PWM 그리고 제안된 RPPWM에 의한 인버터 출력 전압 전류의 고조파 성분을 시뮬레이션에 의하여 비교 검토하였으며 제안된 방법의 유용성을 입증할 수 있었다.