• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.548-553
• /
• 2002

We have investigated the output characteristics of a Nd:YAG oscillator with a Stimulated Brillouin Scattering phase conjugation mirror (SBS-PCM). FC-75 is used as an SBS gain medium and Cr:YAG (T=50%) as a Q-switcher. The SBS-PCM consists of an SBS-cell and a simple plano-convex focusing lens system. For the case of not using a Q-switcher, an SBS-cell doesn't work as a phase conjugation mirror. For the case of using a Q-switcher, the energy characteristics remains nearly the same whether using the SBS-cell or not using it. The pulse width is reduced from 50 ns to 40 ns by an SBS-PCM. When the SBS-cell is used with a Q- switcher, the SBS-cell works very well as a phase conjugation mirror and its beam-profile is improved dramatically. And in order to explain the progression of beam-profile, we propose a simple model based on the nonlinear reflectivity of the SBS-PCM, whose reflectivity is dependent on the pumping intensity at the focal plane.

• International journal of advanced smart convergence
• /
• v.11 no.2
• /
• pp.108-117
• /
• 2022

The recent development of information and communication technology has a great impact on the audio/video industry. In particular, IP-based AoIP transmission technology and AVB technology are making changes in the audio/video market. Video signal transmission technology has been introduced to the market through a network, but it has not replaced the video switcher function. Video signals in the conference room or classroom are still controlled by the switching device. In order to switch input/output video devices, a cable that is not limited by distance must be connected to the switcher. In addition, the control of the switching device must be performed by a person who has received professional training. In this paper, it is a technology that can be operated even by non-experts by replacing complex video cables (RGB, DVI, HDMI, DP) with LAN cables and enabling IP-based video switching and transmission (Video Mirroring over IP: VMoIP) to replace video switcher equipment. We are going to do this study, I/O videos were controlled in the form of matrix and high-definition videos were transmitted without distortion, and VMoIP is expected to become the standard for video switching systems in the future.

• IE interfaces
• /
• v.12 no.2
• /
• pp.174-179
• /
• 1999

This paper describes the development of low cost, miniaturized multi-function image splitter for an unmanned guard system. The essential equipments of an image splitter system consist of a video system which displays in one screen images inputted by several cameras, a frame switcher which records each image sequentially in VTR, and TBC(Time Base Control) system which prevents image flickering during image switching. Currently, the price of similar system on the market is high, system management and repair are difficult, and bulky space is required. Futhermore, since currently available frame switcher can record only 30frame/sec, if eight cameras are installed, each camera image is recorded at the low speed of 3.75frame/sec, and consequently skip some images which may be vital for legal evidence. In this research, we have solved the problem of low speed recording by recording the video screen of splitted images at 30frame/sec and zooming each image when play back.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.26-33
• /
• 2008

This paper presents a new full-bridge soft switching PWM DC-DC converter circuit topology that adding one switcher, one lossless snubber quasi-resonance capacity to power source for general welding machine This full-bridge soft switching DC-DC convoter· topology can applicable 600[V] switching device (IGBT)incase of AC 400[V] common power source because the voltage of active switcher is 1/2 of DC bus line voltage. And low voltage hight current out)ut that first coil current is smaller than second coil current in high frequency transformer can be obtained with decreasing path loss in conventional DC bus line switcher. As it operate ZCS/ZVS in full range, high frequency, high efficiency and high output are implemented at low voltage and high DC current switching power supplies. All of this items are got from simulation and the result of experiment. If make up for the weak points of this proposed circuit, it will be used more easily for next generation TIG, MIG and MAG type of arc-welding machine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.503-510
• /
• 2020

Eco-friendly mountain railways operate on concrete rack tracks embedded on existing sharp curved and steep roads to preserve the environment in mountainous areas. Owing to the narrow roads, single lines are inevitable, and many branches are required. In branches, previous switchers and heating devices cannot be applied, because of the limited spacing for the rack and the slow removal of thick ice. To solve these problems, a switch and a heating device have been developed. The switcher changes the line by moving the block of concrete track with hydraulic actuators. The lack of discontinuity reduces the derailment risk and makes locking simple. The heating device uses high frequency induction coils to increase the efficiency and melt the thick ice rapidly. The prototype switcher and heating device were produced and operated to prove their performance. The heating device yielded a 10 times greater efficiency than the previous one. The switcher and heating device are the essential core technologies for the operation of mountain trams in winter and contribute to the spread of mountain railways to domestic or foreign resort areas by enhancing safety and efficiency. In addition, they can provide transportation rights to local residents in poor winter traffic, and bring about tourism and local economic growth.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.4
• /
• pp.60-67
• /
• 2008

This paper presents a new full-bridge soft switching PWM DC-DC converter circuit topology that adding two switcher, two lossless snubber quasi-resonance capacity, two diode to power source for general welding machine. This half bridge soft switching Is low voltage hight current output that first coil current is smaller than second coil current in high frequency transformer can be obtained with decreasing path loss in conventional DC bus line switcher. As it operate ZCS/ZVS in full range, high frequency, high efficiency and high output are implemented at low voltage and high DC current switching power supplies. All of this items are got from simulation and the result of experiment. If make up for the weak points of this proposed circuit, it will be used more easily for next generation TIG, MIG and MAG type of arc-welding machine.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.8
• /
• pp.408-415
• /
• 2001

Using power semiconductor switches such as IGBTs, diodes and L-C circuits, novel repetitive impulse voltage generator is developed. In the presented circuits, high voltage pulse is generated by series-connection of capacitors and IGBTs. Therefore, the high voltage pulse is obtained by circuit configuration without any high voltage pulse transformer and high voltage dc source. Especially, the proposed circuit can operate up to several kHz and have high reliability and longer life than conventional ones. In also gives voltage balance of IBGTs automatically. So, the difference of characteristics of IGBTs and drive signal does not cause severe problems. To verify the proposed circuit, 20kV and 300A pulse generator is manufactured and tested.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2538-2539
• /
• 2000

송배전 system에서 모선관리 및 운용에 있어 초고압 차단기는 매우 중요한 역할을 담당하고 있다. 선로의 운전상태와 차단기의 투입 상황 인식 및 확인은 필수요건이다. 이러한 차단기의 운전상태를 전자적인 신호성분을 검지하여 비접촉식 개폐 확인 unit가 필수적으로 대두되고 있다. 이 unit는 고신뢰성, 고안정성을 요구하며 정확한 표시가 필요하다. 송배전의 모든 System에 적용 가능하며 적용시 선로와 차단기의 운전 및 보수에 절대적인 안정성을 제공한다.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.259-266
• /
• 1999

A study on the static type train simulator will include the training of new drives requires that the environment of the cab, controls placement, etc. must highly realistic so that driver can readily transfer his training experience to the real world. The simulator computer sends video disc speed command to a Video PC processor. A video switcher select the output of the on-line player. This selection is done with loss of vertical synchronization, meaning the picture will not noticeable roll or jump as the simulation mover from disc to disc. The video image quality remain contestant through the simulated speed range from zero to 100km/h. Flicker is avoided in the scene by the use of a TBC(Time Base Corrector) which causes the display of one video field at a time. Thus, no interfield jitter is present when the scene is stopped.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.805-807
• /
• 2007

컴퓨팅 환경이 유비쿼터스 환경으로 변화함에 따라 정보의 량은 증가하지만, 사용자가 이 모든 정보를 수용하기에는 한계가 있다. 그래서 유비쿼터스 환경에서는 장치 스스로 상황을 인지하고 능동적으로 처리할 필요가 있다. 본 논문에서는 블루투스 라디오 신호 세기를 기반하여 위치 인지를 하고 이를 바탕으로 이동중인 사용자에게 동적으로 멀티미디어 스트리밍 스위칭 서비스를 제공하는 u-MESSAGE(ubiquitous MEdia Stream Switcher At Genius home Entertainment) 시스템을 소개한다.