• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권3호
• /
• pp.122-126
• /
• 2004

The objective of this paper is to provide a comparison between the Line Start Permanent Magnet, Skeleton type Brushless DC, and the Snail-cam type Switched Reluctance Motor. These motors are compared under the same load characteristic as the cooling fan motor of a refrigerator. The comparison consists of speed, output power, efficiency, copper loss, and cost for three different motors. For the given application, the results provide an indication of the best machine suited with respect to performance and cost.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2057-2066
• /
• 2016

An extension of the one-cycle control (OCC) method for switched-capacitor (SC) converters is proposed in this paper, featuring a fast dynamic response, wide line and load operation ranges, and simplicity in implementation. To illustrate the operation principle of this nonlinear control method and to demonstrate its simplicity in design, a dual-phase unity gain SC converter is examined. A new control loop based on the charge balance in a flying capacitor is formulated for the OCC technique and implemented with a 15W dual-phase unity gain SC converter on a circuit board for control verification. The obtained experimental results show that external disturbances can be rejected in one switching cycle by the OCC controlled SC converter with good line and load regulations. When compared to other control methods, the proposed nonlinear control loop exhibits superior dynamic performance in suppressing input and load disturbances.

• 한국통신학회논문지
• /
• 제25권6A호
• /
• pp.813-817
• /
• 2000

WDM Ring의 경우 지금까지 UPSR/2나 BLSR/4 만 고려되어 왔었다. 그러나 본 논문에서는 WDM 장치의 상위 계층인 SDH의 보호측면 및 optical SNR의 측면에서 기존의 BLSR/4보다 장점이 많은 4-fiber bidirectional path switched ring을 제안하였다. 또한 이를 구현할 수 있는 2가지 방법에 대해 살펴보았고, 감시제어채널을 이용하지 않고도 제안된 보호/절체 구조를 구현할 수 있는 distributed control scheme에 대해 제시하였다.

• 로봇학회논문지
• /
• 제1권2호
• /
• pp.125-134
• /
• 2006

The problem of establishing the servo system to reach the desired location keeping all features in the field of view and following a straight line is considered. In addition, robustness of camera calibration parameters is considered in this paper. The proposed approach is based on switching from position-based visual servoing (PBVS) to image-based visual servoing (IBVS) and allows the camera path to follow a straight line. To achieve the objective, a pose estimation method is required; the camera's target pose is estimated from the obtained images without the knowledge of the object. A switched control law moves the camera equipped to a robot end-effector near the desired location following a straight line in Cartesian space and then positions it to the desired pose with robustness to camera calibration error. Finally simulation results show the feasibility of the proposed visual servoing technique.

• 한국산업정보학회논문지
• /
• 제17권7호
• /
• pp.119-125
• /
• 2012

본 논문은 변전소 내에서 취득된 데이터만을 이용하여 전계통 전압안정도를 확보하기 위한 실시간 변전소내 OLTC(On-Load Tap Changer)와 S.S(Switched Shunt)와의 협조제어 알고리즘을 제안하고자 한다. 전압레벨을 일정한 값으로 유지시키기 위해서 동작하는 OLTC의 제어를 잘못하게 된다면 오히려 계통의 안정도(전압안정도) 를 해치는 결과를 나타낼 수 있다. 이 논문에서는 단일 변전소에서 취득된 데이터만으로 전체 시스템의 상태를 판단할 수 있는 Z-index를 이용하였다. Z-index를 이용하여 시스템을 normal 상태와 abnormal 상태로 구분하였고, 각 상태에 따른 협조제어 알고리즘을 제안하였다. 알고리즘 검증을 위해서 Hypersim과 matlab simulink를 이용하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1147-1152
• /
• 2004

Switched Reluctance Motors have an inexpensive, intrinsic simplicity and low cost that makes them well suited to home appliance and office applications. However the motor suffering with necessity of shaft position sensor, lead to non-linearity of operations. Further, the involvement of static converters deteriorates the operational power factor. Implementation of a sensorless algorithm, can remove the need of position sensors. Also, the drive includes a compact power factor control in the input stage by implementing Zero Current Switching Quasi-Resonant Boost Technology. This paper presented, aims at optimized low line current distortion, high power factor, low cost and a shaft position sensorless Switched Reluctance Motor drive.

• 한국자기학회지
• /
• 제13권3호
• /
• pp.115-120
• /
• 2003

스퍼터링 방법으로 FM/M/FM의 다층박막을 증착한 다음 초소형 박막 인덕터를 제작하기 위하여 반도체 공정을 대체할 수 있는 레이저 미세가공 기술을 개발하였다. TE $M_{00}$ 모드로 발진하는 CW Nd:YAG 레이저를 active Q-switching 하여 펄스폭이 200 ns인 극 초단 레이저 펄스를 얻었다. 레이저 미세가공 조건을 반복율 5 kHz, 펄스 당 에너지 5 mJ/pulse로 최적화 하여 분해능이 20 $\mu\textrm{m}$인 line patterning을 얻었다.

• Current Optics and Photonics
• /
• 제1권3호
• /
• pp.203-206
• /
• 2017

We report a passive Q-switching of an all-fiber erbium-doped fiber laser delivering high pulse energy by using a high quality single-walled carbon nanotube saturable absorber (SWCNT-SA). A side-polished fiber coated with the SWCNT is employed as an in-line SA for evanescent wave interaction between the incident light and the SWCNT. This lateral interaction scheme enables a stable Q-switched fiber laser that generates high pulse energy. The central wavelength of the Q-switched pulse laser was measured as 1560 nm. A repetition rate frequency of the Q-switched laser is controlled from 78 kHz to 190 kHz by adjusting the applied pump power from 124 mW to 790 mW. The variation of pulse energy from 51 nJ to 270 nJ is also observed as increasing the pump power. The pulse energy of 270 nJ achieved at maximum pump power is 3 times larger than those reported in Q-switched all-fiber lasers using a SWCNT-SA. The tunable behaviors in pulse duration, pulse repetition rate, and pulse energy as a function of pump power are reported, and are well matched with theoretical expectation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.626-630
• /
• 1999

A new integrated single-stage zero current switched(ZCS) quasi-resonant converter (QRC) for the power factor correction(PFC) converter is introduced in this paper. The power factor correction can be achieved by the discontinuous conduction mode(DCM) operation of an input current. The proposed converter has the characteristics of the good power factor, low line current harmonics, and tight output regulation. Furthermore, the ringing effect due to the output capacitance of the main switch can be eliminated by use of active clamp circuit.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.265-268
• /
• 1998

This paper presents a soft-switching average current control PWM high power factor boost converter. Conventional boost ZVT-PWM converter has a disadvantage of hard-switching for auxiliary switch at turn-off. A soft switched auxiliary switch is proposed to achieve a high performance ZVT-PWM boost rectifier. The simulation and experimental results show that soft switching operation can be maintained for wide line and load range, which in turn improves the converter performance in terms of efficiency, switching noise and circuit reliability.